| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAFgQCTuf95pJSWDc1BNQ=gN76aJ_dtxMRbAV9a28X6w8vapdMQ@mail.gmail.com>
Date: Fri, 7 Dec 2018 21:20:17 +0800
From: Pingfan Liu <kernelfans@...il.com>
To: mhocko@...nel.org
Cc: Vlastimil Babka <vbabka@...e.cz>, linux-mm@...ck.org,
linux-kernel@...r.kernel.org,
Andrew Morton <akpm@...ux-foundation.org>,
Mike Rapoport <rppt@...ux.vnet.ibm.com>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Jonathan Cameron <Jonathan.Cameron@...wei.com>
Subject: Re: [PATCH] mm/alloc: fallback to first node if the wanted node offline
On Fri, Dec 7, 2018 at 7:30 PM Michal Hocko <mhocko@...nel.org> wrote:
>
[...]
> On Fri 07-12-18 17:40:09, Pingfan Liu wrote:
> > On Fri, Dec 7, 2018 at 3:53 PM Michal Hocko <mhocko@...nel.org> wrote:
> > >
> > > On Fri 07-12-18 10:56:51, Pingfan Liu wrote:
> > > [...]
> > > > In a short word, the fix method should consider about the two factors:
> > > > semantic of online-node and the effect on all archs
> > >
> > > I am pretty sure there is a lot of room for unification in this area.
> > > Nevertheless I strongly believe the bug should be fixed firs with the
> > > simplest way and all the cleanup should be done on top.
> > >
> > > Do I get it right that the diff worked for you and I can prepare a full
> > > patch?
> > >
> > Sure, I am glad to test you new patch.
>
> From 46e68be89d9c299fd497b2b8bea3f2add144f17f Mon Sep 17 00:00:00 2001
> From: Michal Hocko <mhocko@...e.com>
> Date: Fri, 7 Dec 2018 12:23:32 +0100
> Subject: [PATCH] x86, numa: always initialize all possible nodes
>
> Pingfan Liu has reported the following splat
> [ 5.772742] BUG: unable to handle kernel paging request at 0000000000002088
> [ 5.773618] PGD 0 P4D 0
> [ 5.773618] Oops: 0000 [#1] SMP NOPTI
> [ 5.773618] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.20.0-rc1+ #3
> [ 5.773618] Hardware name: Dell Inc. PowerEdge R7425/02MJ3T, BIOS 1.4.3 06/29/2018
> [ 5.773618] RIP: 0010:__alloc_pages_nodemask+0xe2/0x2a0
> [ 5.773618] Code: 00 00 44 89 ea 80 ca 80 41 83 f8 01 44 0f 44 ea 89 da c1 ea 08 83 e2 01 88 54 24 20 48 8b 54 24 08 48 85 d2 0f 85 46 01 00 00 <3b> 77 08 0f 82 3d 01 00 00 48 89 f8 44 89 ea 48 89
> e1 44 89 e6 89
> [ 5.773618] RSP: 0018:ffffaa600005fb20 EFLAGS: 00010246
> [ 5.773618] RAX: 0000000000000000 RBX: 00000000006012c0 RCX: 0000000000000000
> [ 5.773618] RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000002080
> [ 5.773618] RBP: 00000000006012c0 R08: 0000000000000000 R09: 0000000000000002
> [ 5.773618] R10: 00000000006080c0 R11: 0000000000000002 R12: 0000000000000000
> [ 5.773618] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000002
> [ 5.773618] FS: 0000000000000000(0000) GS:ffff8c69afe00000(0000) knlGS:0000000000000000
> [ 5.773618] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 5.773618] CR2: 0000000000002088 CR3: 000000087e00a000 CR4: 00000000003406e0
> [ 5.773618] Call Trace:
> [ 5.773618] new_slab+0xa9/0x570
> [ 5.773618] ___slab_alloc+0x375/0x540
> [ 5.773618] ? pinctrl_bind_pins+0x2b/0x2a0
> [ 5.773618] __slab_alloc+0x1c/0x38
> [ 5.773618] __kmalloc_node_track_caller+0xc8/0x270
> [ 5.773618] ? pinctrl_bind_pins+0x2b/0x2a0
> [ 5.773618] devm_kmalloc+0x28/0x60
> [ 5.773618] pinctrl_bind_pins+0x2b/0x2a0
> [ 5.773618] really_probe+0x73/0x420
> [ 5.773618] driver_probe_device+0x115/0x130
> [ 5.773618] __driver_attach+0x103/0x110
> [ 5.773618] ? driver_probe_device+0x130/0x130
> [ 5.773618] bus_for_each_dev+0x67/0xc0
> [ 5.773618] ? klist_add_tail+0x3b/0x70
> [ 5.773618] bus_add_driver+0x41/0x260
> [ 5.773618] ? pcie_port_setup+0x4d/0x4d
> [ 5.773618] driver_register+0x5b/0xe0
> [ 5.773618] ? pcie_port_setup+0x4d/0x4d
> [ 5.773618] do_one_initcall+0x4e/0x1d4
> [ 5.773618] ? init_setup+0x25/0x28
> [ 5.773618] kernel_init_freeable+0x1c1/0x26e
> [ 5.773618] ? loglevel+0x5b/0x5b
> [ 5.773618] ? rest_init+0xb0/0xb0
> [ 5.773618] kernel_init+0xa/0x110
> [ 5.773618] ret_from_fork+0x22/0x40
> [ 5.773618] Modules linked in:
> [ 5.773618] CR2: 0000000000002088
> [ 5.773618] ---[ end trace 1030c9120a03d081 ]---
>
> with his AMD machine with the following topology
> NUMA node0 CPU(s): 0,8,16,24
> NUMA node1 CPU(s): 2,10,18,26
> NUMA node2 CPU(s): 4,12,20,28
> NUMA node3 CPU(s): 6,14,22,30
> NUMA node4 CPU(s): 1,9,17,25
> NUMA node5 CPU(s): 3,11,19,27
> NUMA node6 CPU(s): 5,13,21,29
> NUMA node7 CPU(s): 7,15,23,31
>
> [ 0.007418] Early memory node ranges
> [ 0.007419] node 1: [mem 0x0000000000001000-0x000000000008efff]
> [ 0.007420] node 1: [mem 0x0000000000090000-0x000000000009ffff]
> [ 0.007422] node 1: [mem 0x0000000000100000-0x000000005c3d6fff]
> [ 0.007422] node 1: [mem 0x00000000643df000-0x0000000068ff7fff]
> [ 0.007423] node 1: [mem 0x000000006c528000-0x000000006fffffff]
> [ 0.007424] node 1: [mem 0x0000000100000000-0x000000047fffffff]
> [ 0.007425] node 5: [mem 0x0000000480000000-0x000000087effffff]
>
> and nr_cpus set to 4. The underlying reason is tha the device is bound
> to node 2 which doesn't have any memory and init_cpu_to_node only
> initializes memory-less nodes for possible cpus which nr_cpus restrics.
> This in turn means that proper zonelists are not allocated and the page
> allocator blows up.
>
> Fix the issue by moving init_memory_less_node into numa_register_memblks
> and always initialize all possible nodes consistently at a single place.
>
> Reported-by: Pingfan Liu <kernelfans@...il.com>
> Signed-off-by: Michal Hocko <mhocko@...e.com>
> ---
> arch/x86/mm/numa.c | 33 +++++++++++++++------------------
> 1 file changed, 15 insertions(+), 18 deletions(-)
>
> diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
> index 1308f5408bf7..4575ae4d5449 100644
> --- a/arch/x86/mm/numa.c
> +++ b/arch/x86/mm/numa.c
> @@ -527,6 +527,19 @@ static void __init numa_clear_kernel_node_hotplug(void)
> }
> }
>
> +static void __init init_memory_less_node(int nid)
> +{
> + unsigned long zones_size[MAX_NR_ZONES] = {0};
> + unsigned long zholes_size[MAX_NR_ZONES] = {0};
> +
> + free_area_init_node(nid, zones_size, 0, zholes_size);
> +
> + /*
> + * All zonelists will be built later in start_kernel() after per cpu
> + * areas are initialized.
> + */
> +}
> +
> static int __init numa_register_memblks(struct numa_meminfo *mi)
> {
> unsigned long uninitialized_var(pfn_align);
> @@ -592,6 +605,8 @@ static int __init numa_register_memblks(struct numa_meminfo *mi)
> continue;
>
> alloc_node_data(nid);
> + if (!end)
> + init_memory_less_node(nid);
> }
>
> /* Dump memblock with node info and return. */
> @@ -721,21 +736,6 @@ void __init x86_numa_init(void)
> numa_init(dummy_numa_init);
> }
>
> -static void __init init_memory_less_node(int nid)
> -{
> - unsigned long zones_size[MAX_NR_ZONES] = {0};
> - unsigned long zholes_size[MAX_NR_ZONES] = {0};
> -
> - /* Allocate and initialize node data. Memory-less node is now online.*/
> - alloc_node_data(nid);
> - free_area_init_node(nid, zones_size, 0, zholes_size);
> -
> - /*
> - * All zonelists will be built later in start_kernel() after per cpu
> - * areas are initialized.
> - */
> -}
> -
> /*
> * Setup early cpu_to_node.
> *
> @@ -763,9 +763,6 @@ void __init init_cpu_to_node(void)
> if (node == NUMA_NO_NODE)
> continue;
>
> - if (!node_online(node))
> - init_memory_less_node(node);
> -
> numa_set_node(cpu, node);
> }
> }
> --
> 2.19.2
>
Hi Michal,
As I mentioned in my previous email, I have manually apply the patch,
and the patch can not work for normal bootup. Your new patch seems to
have no essential changes, I applied it and had a try. It does not
work yet.
Thanks,
Pingfan
Powered by blists - more mailing lists