| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20181208070101.6117-1-abrodkin@synopsys.com>
Date: Sat, 8 Dec 2018 10:01:01 +0300
From: Alexey Brodkin <alexey.brodkin@...opsys.com>
To: linux-snps-arc@...ts.infradead.org
Cc: linux-kernel@...r.kernel.org,
Vineet Gupta <vineet.gupta1@...opsys.com>,
Alexey Brodkin <alexey.brodkin@...opsys.com>,
Rob Herring <robh+dt@...nel.org>
Subject: [PATCH] ARC: Remove 0x prefix from unit-address of node names
Done automatically with help of:
----------------------->8------------------------
sed -i 's/@0x/@/g' arch/arc/boot/dts/*.dts*
----------------------->8------------------------
Inspired by [1] and the like.
[1] http://kisskb.ellerman.id.au/kisskb/buildresult/13612017/
Signed-off-by: Alexey Brodkin <abrodkin@...opsys.com>
Cc: Rob Herring <robh+dt@...nel.org>
Signed-off-by: Alexey Brodkin <abrodkin@...opsys.com>
---
arch/arc/boot/dts/abilis_tb10x.dtsi | 4 ++--
arch/arc/boot/dts/axc001.dtsi | 6 +++---
arch/arc/boot/dts/axc003.dtsi | 14 +++++++-------
arch/arc/boot/dts/axc003_idu.dtsi | 14 +++++++-------
arch/arc/boot/dts/axs10x_mb.dtsi | 22 +++++++++++-----------
arch/arc/boot/dts/vdk_axc003.dtsi | 4 ++--
arch/arc/boot/dts/vdk_axc003_idu.dtsi | 4 ++--
arch/arc/boot/dts/vdk_axs10x_mb.dtsi | 14 +++++++-------
8 files changed, 41 insertions(+), 41 deletions(-)
diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi
index 3121536b25a3..77ac1368a65b 100644
--- a/arch/arc/boot/dts/abilis_tb10x.dtsi
+++ b/arch/arc/boot/dts/abilis_tb10x.dtsi
@@ -178,7 +178,7 @@
clocks = <&ahb_clk>;
};
- spi0: spi@...E010000 {
+ spi0: spi@...10000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
@@ -189,7 +189,7 @@
interrupts = <26 8>;
clocks = <&ahb_clk>;
};
- spi1: spi@...E011000 {
+ spi1: spi@...11000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
diff --git a/arch/arc/boot/dts/axc001.dtsi b/arch/arc/boot/dts/axc001.dtsi
index fdc266504ada..37be3bf03ad6 100644
--- a/arch/arc/boot/dts/axc001.dtsi
+++ b/arch/arc/boot/dts/axc001.dtsi
@@ -41,7 +41,7 @@
* this GPIO block ORs all interrupts on CPU card (creg,..)
* to uplink only 1 IRQ to ARC core intc
*/
- dw-apb-gpio@...000 {
+ dw-apb-gpio@...0 {
compatible = "snps,dw-apb-gpio";
reg = < 0x2000 0x80 >;
#address-cells = <1>;
@@ -60,7 +60,7 @@
};
};
- debug_uart: dw-apb-uart@...000 {
+ debug_uart: dw-apb-uart@...0 {
compatible = "snps,dw-apb-uart";
reg = <0x5000 0x100>;
clock-frequency = <33333000>;
@@ -88,7 +88,7 @@
* avoid duplicating the MB dtsi file given that IRQ from
* this intc to cpu intc are different for axs101 and axs103
*/
- mb_intc: dw-apb-ictl@...0012000 {
+ mb_intc: dw-apb-ictl@...12000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0x0 0xe0012000 0x0 0x200 >;
diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi
index d75d65ddf8e3..ffa208a57a0a 100644
--- a/arch/arc/boot/dts/axc003.dtsi
+++ b/arch/arc/boot/dts/axc003.dtsi
@@ -55,7 +55,7 @@
* this GPIO block ORs all interrupts on CPU card (creg,..)
* to uplink only 1 IRQ to ARC core intc
*/
- dw-apb-gpio@...000 {
+ dw-apb-gpio@...0 {
compatible = "snps,dw-apb-gpio";
reg = < 0x2000 0x80 >;
#address-cells = <1>;
@@ -74,7 +74,7 @@
};
};
- debug_uart: dw-apb-uart@...000 {
+ debug_uart: dw-apb-uart@...0 {
compatible = "snps,dw-apb-uart";
reg = <0x5000 0x100>;
clock-frequency = <33333000>;
@@ -102,19 +102,19 @@
* external DMA buffer located outside of IOC aperture.
*/
axs10x_mb {
- ethernet@...8000 {
+ ethernet@...00 {
dma-coherent;
};
- ehci@...0000 {
+ ehci@...00 {
dma-coherent;
};
- ohci@...0000 {
+ ohci@...00 {
dma-coherent;
};
- mmc@...5000 {
+ mmc@...00 {
dma-coherent;
};
};
@@ -132,7 +132,7 @@
* avoid duplicating the MB dtsi file given that IRQ from
* this intc to cpu intc are different for axs101 and axs103
*/
- mb_intc: dw-apb-ictl@...0012000 {
+ mb_intc: dw-apb-ictl@...12000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0x0 0xe0012000 0x0 0x200 >;
diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi
index a05bb737ea63..ad795748ac63 100644
--- a/arch/arc/boot/dts/axc003_idu.dtsi
+++ b/arch/arc/boot/dts/axc003_idu.dtsi
@@ -62,7 +62,7 @@
* this GPIO block ORs all interrupts on CPU card (creg,..)
* to uplink only 1 IRQ to ARC core intc
*/
- dw-apb-gpio@...000 {
+ dw-apb-gpio@...0 {
compatible = "snps,dw-apb-gpio";
reg = < 0x2000 0x80 >;
#address-cells = <1>;
@@ -81,7 +81,7 @@
};
};
- debug_uart: dw-apb-uart@...000 {
+ debug_uart: dw-apb-uart@...0 {
compatible = "snps,dw-apb-uart";
reg = <0x5000 0x100>;
clock-frequency = <33333000>;
@@ -109,19 +109,19 @@
* external DMA buffer located outside of IOC aperture.
*/
axs10x_mb {
- ethernet@...8000 {
+ ethernet@...00 {
dma-coherent;
};
- ehci@...0000 {
+ ehci@...00 {
dma-coherent;
};
- ohci@...0000 {
+ ohci@...00 {
dma-coherent;
};
- mmc@...5000 {
+ mmc@...00 {
dma-coherent;
};
};
@@ -138,7 +138,7 @@
* avoid duplicating the MB dtsi file given that IRQ from
* this intc to cpu intc are different for axs101 and axs103
*/
- mb_intc: dw-apb-ictl@...0012000 {
+ mb_intc: dw-apb-ictl@...12000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0x0 0xe0012000 0x0 0x200 >;
diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
index 37bafd44e36d..4ead6dc9af2f 100644
--- a/arch/arc/boot/dts/axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi
@@ -72,7 +72,7 @@
};
};
- gmac: ethernet@...8000 {
+ gmac: ethernet@...00 {
#interrupt-cells = <1>;
compatible = "snps,dwmac";
reg = < 0x18000 0x2000 >;
@@ -88,13 +88,13 @@
mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
};
- ehci@...0000 {
+ ehci@...00 {
compatible = "generic-ehci";
reg = < 0x40000 0x100 >;
interrupts = < 8 >;
};
- ohci@...0000 {
+ ohci@...00 {
compatible = "generic-ohci";
reg = < 0x60000 0x100 >;
interrupts = < 8 >;
@@ -118,7 +118,7 @@
* dw_mci_pltfm_prepare_command() is used in generic platform
* code.
*/
- mmc@...5000 {
+ mmc@...00 {
compatible = "altr,socfpga-dw-mshc";
reg = < 0x15000 0x400 >;
fifo-depth = < 16 >;
@@ -129,7 +129,7 @@
bus-width = < 4 >;
};
- uart@...0000 {
+ uart@...00 {
compatible = "snps,dw-apb-uart";
reg = <0x20000 0x100>;
clock-frequency = <33333333>;
@@ -139,7 +139,7 @@
reg-io-width = <4>;
};
- uart@...1000 {
+ uart@...00 {
compatible = "snps,dw-apb-uart";
reg = <0x21000 0x100>;
clock-frequency = <33333333>;
@@ -150,7 +150,7 @@
};
/* UART muxed with USB data port (ttyS3) */
- uart@...2000 {
+ uart@...00 {
compatible = "snps,dw-apb-uart";
reg = <0x22000 0x100>;
clock-frequency = <33333333>;
@@ -160,7 +160,7 @@
reg-io-width = <4>;
};
- i2c@...d000 {
+ i2c@...00 {
compatible = "snps,designware-i2c";
reg = <0x1d000 0x100>;
clock-frequency = <400000>;
@@ -177,7 +177,7 @@
#sound-dai-cells = <0>;
};
- i2c@...f000 {
+ i2c@...00 {
compatible = "snps,designware-i2c";
#address-cells = <1>;
#size-cells = <0>;
@@ -218,13 +218,13 @@
};
};
- eeprom@...4{
+ eeprom@54{
compatible = "atmel,24c01";
reg = <0x54>;
pagesize = <0x8>;
};
- eeprom@...7{
+ eeprom@57{
compatible = "atmel,24c04";
reg = <0x57>;
pagesize = <0x8>;
diff --git a/arch/arc/boot/dts/vdk_axc003.dtsi b/arch/arc/boot/dts/vdk_axc003.dtsi
index 0fd6ba985b16..84e8766c8ca2 100644
--- a/arch/arc/boot/dts/vdk_axc003.dtsi
+++ b/arch/arc/boot/dts/vdk_axc003.dtsi
@@ -36,7 +36,7 @@
#interrupt-cells = <1>;
};
- debug_uart: dw-apb-uart@...000 {
+ debug_uart: dw-apb-uart@...0 {
compatible = "snps,dw-apb-uart";
reg = <0x5000 0x100>;
clock-frequency = <2403200>;
@@ -49,7 +49,7 @@
};
- mb_intc: dw-apb-ictl@...0012000 {
+ mb_intc: dw-apb-ictl@...12000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0xe0012000 0x200 >;
diff --git a/arch/arc/boot/dts/vdk_axc003_idu.dtsi b/arch/arc/boot/dts/vdk_axc003_idu.dtsi
index 28956f9a9f3d..eb7e705e8a27 100644
--- a/arch/arc/boot/dts/vdk_axc003_idu.dtsi
+++ b/arch/arc/boot/dts/vdk_axc003_idu.dtsi
@@ -44,7 +44,7 @@
#interrupt-cells = <1>;
};
- debug_uart: dw-apb-uart@...000 {
+ debug_uart: dw-apb-uart@...0 {
compatible = "snps,dw-apb-uart";
reg = <0x5000 0x100>;
clock-frequency = <2403200>;
@@ -57,7 +57,7 @@
};
- mb_intc: dw-apb-ictl@...0012000 {
+ mb_intc: dw-apb-ictl@...12000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0xe0012000 0x200 >;
diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
index 48bb4b4cd234..ad18daa7b307 100644
--- a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
@@ -36,7 +36,7 @@
};
};
- ethernet@...8000 {
+ ethernet@...00 {
#interrupt-cells = <1>;
compatible = "snps,dwmac";
reg = < 0x18000 0x2000 >;
@@ -49,13 +49,13 @@
clock-names = "stmmaceth";
};
- ehci@...0000 {
+ ehci@...00 {
compatible = "generic-ehci";
reg = < 0x40000 0x100 >;
interrupts = < 8 >;
};
- uart@...0000 {
+ uart@...00 {
compatible = "snps,dw-apb-uart";
reg = <0x20000 0x100>;
clock-frequency = <2403200>;
@@ -65,7 +65,7 @@
reg-io-width = <4>;
};
- uart@...1000 {
+ uart@...00 {
compatible = "snps,dw-apb-uart";
reg = <0x21000 0x100>;
clock-frequency = <2403200>;
@@ -75,7 +75,7 @@
reg-io-width = <4>;
};
- uart@...2000 {
+ uart@...00 {
compatible = "snps,dw-apb-uart";
reg = <0x22000 0x100>;
clock-frequency = <2403200>;
@@ -101,7 +101,7 @@
interrupt-names = "arc_ps2_irq";
};
- mmc@...5000 {
+ mmc@...00 {
compatible = "snps,dw-mshc";
reg = <0x15000 0x400>;
fifo-depth = <1024>;
@@ -119,7 +119,7 @@
* This node is intentionally put outside of MB above becase
* it maps areas outside of MB's 0xEz-0xFz.
*/
- uio_ev: uio@...0000000 {
+ uio_ev: uio@...00000 {
compatible = "generic-uio";
reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>;
reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem";
--
2.16.2
Powered by blists - more mailing lists