lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1544425521-775-2-git-send-email-Anson.Huang@nxp.com>
Date:   Mon, 10 Dec 2018 07:11:23 +0000
From:   Anson Huang <anson.huang@....com>
To:     "jic23@...nel.org" <jic23@...nel.org>,
        "knaack.h@....de" <knaack.h@....de>,
        "lars@...afoo.de" <lars@...afoo.de>,
        "pmeerw@...erw.net" <pmeerw@...erw.net>,
        "robh+dt@...nel.org" <robh+dt@...nel.org>,
        "mark.rutland@....com" <mark.rutland@....com>,
        "linux-iio@...r.kernel.org" <linux-iio@...r.kernel.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC:     dl-linux-imx <linux-imx@....com>
Subject: [PATCH V3 2/2] iio: light: isl29018: add optional vdd/vdda regulator
 operation support

The light sensor's power supply could be controlled by regulator
on some platforms, such as i.MX6Q-SABRESD board, the light sensor
isl29023's power supply is controlled by a GPIO fixed regulator,
need to make sure the regulator is enabled before any operation of
sensor, this patch adds optional vdd/vdda regulator operation support.

Signed-off-by: Anson Huang <Anson.Huang@....com>
---
ChangeLog since V2:
    - Add defer_probe check if the return value from devm_regulator_get_optional is ERR_PTR(-EPROBE_DEFER);
    - Replace the "vcc" with "vdd" according to datasheet, and add optional "vdda" supply as well since
      isl29018 also has a vdda supply.
---
 drivers/iio/light/isl29018.c | 59 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)

diff --git a/drivers/iio/light/isl29018.c b/drivers/iio/light/isl29018.c
index b45400f..477eb95 100644
--- a/drivers/iio/light/isl29018.c
+++ b/drivers/iio/light/isl29018.c
@@ -23,6 +23,7 @@
 #include <linux/mutex.h>
 #include <linux/delay.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -95,6 +96,8 @@ struct isl29018_chip {
 	struct isl29018_scale	scale;
 	int			prox_scheme;
 	bool			suspended;
+	struct regulator	*vdd_reg;
+	struct regulator	*vdda_reg;
 };
 
 static int isl29018_set_integration_time(struct isl29018_chip *chip,
@@ -735,6 +738,28 @@ static int isl29018_probe(struct i2c_client *client,
 
 	mutex_init(&chip->lock);
 
+	chip->vdd_reg = devm_regulator_get_optional(&client->dev, "vdd");
+	if (!IS_ERR(chip->vdd_reg)) {
+		err = regulator_enable(chip->vdd_reg);
+		if (err) {
+			dev_err(&client->dev, "failed to enable VDD regulator\n");
+			return err;
+		}
+	} else if (chip->vdd_reg == ERR_PTR(-EPROBE_DEFER)) {
+		return -EPROBE_DEFER;
+	}
+
+	chip->vdda_reg = devm_regulator_get_optional(&client->dev, "vdda");
+	if (!IS_ERR(chip->vdda_reg)) {
+		err = regulator_enable(chip->vdda_reg);
+		if (err) {
+			dev_err(&client->dev, "failed to enable VDDA regulator\n");
+			return err;
+		}
+	} else if (chip->vdda_reg == ERR_PTR(-EPROBE_DEFER)) {
+		return -EPROBE_DEFER;
+	}
+
 	chip->type = dev_id;
 	chip->calibscale = 1;
 	chip->ucalibscale = 0;
@@ -768,6 +793,7 @@ static int isl29018_probe(struct i2c_client *client,
 static int isl29018_suspend(struct device *dev)
 {
 	struct isl29018_chip *chip = iio_priv(dev_get_drvdata(dev));
+	int ret;
 
 	mutex_lock(&chip->lock);
 
@@ -777,6 +803,22 @@ static int isl29018_suspend(struct device *dev)
 	 * So we do not have much to do here.
 	 */
 	chip->suspended = true;
+	if (!IS_ERR(chip->vdd_reg)) {
+		ret = regulator_disable(chip->vdd_reg);
+		if (ret) {
+			dev_err(dev, "failed to disable VDD regulator\n");
+			mutex_unlock(&chip->lock);
+			return ret;
+		}
+	}
+	if (!IS_ERR(chip->vdda_reg)) {
+		ret = regulator_disable(chip->vdda_reg);
+		if (ret) {
+			dev_err(dev, "failed to disable VDDA regulator\n");
+			mutex_unlock(&chip->lock);
+			return ret;
+		}
+	}
 
 	mutex_unlock(&chip->lock);
 
@@ -790,6 +832,23 @@ static int isl29018_resume(struct device *dev)
 
 	mutex_lock(&chip->lock);
 
+	if (!IS_ERR(chip->vdd_reg)) {
+		err = regulator_enable(chip->vdd_reg);
+		if (err) {
+			dev_err(dev, "failed to enable VDD regulator\n");
+			mutex_unlock(&chip->lock);
+			return err;
+		}
+	}
+	if (!IS_ERR(chip->vdda_reg)) {
+		err = regulator_enable(chip->vdda_reg);
+		if (err) {
+			dev_err(dev, "failed to enable VDDA regulator\n");
+			mutex_unlock(&chip->lock);
+			return err;
+		}
+	}
+
 	err = isl29018_chip_init(chip);
 	if (!err)
 		chip->suspended = false;
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ