[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20181211151614.075095303@linuxfoundation.org>
Date: Tue, 11 Dec 2018 16:41:22 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Olof Johansson <olof@...om.net>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Boris Brezillon <boris.brezillon@...tlin.com>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 4.9 14/51] mtd: rawnand: qcom: Namespace prefix some commands
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 33bf5519ae5dd356b182a94e3622f42860274a38 ]
PAGE_READ is used by RISC-V arch code included through mm headers,
and it makes sense to bring in a prefix on these in the driver.
drivers/mtd/nand/raw/qcom_nandc.c:153: warning: "PAGE_READ" redefined
#define PAGE_READ 0x2
In file included from include/linux/memremap.h:7,
from include/linux/mm.h:27,
from include/linux/scatterlist.h:8,
from include/linux/dma-mapping.h:11,
from drivers/mtd/nand/raw/qcom_nandc.c:17:
arch/riscv/include/asm/pgtable.h:48: note: this is the location of the previous definition
Caught by riscv allmodconfig.
Signed-off-by: Olof Johansson <olof@...om.net>
Reviewed-by: Miquel Raynal <miquel.raynal@...tlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@...tlin.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/mtd/nand/qcom_nandc.c | 32 ++++++++++++++++----------------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c
index dc4943134649..9f6c9a34b9eb 100644
--- a/drivers/mtd/nand/qcom_nandc.c
+++ b/drivers/mtd/nand/qcom_nandc.c
@@ -142,15 +142,15 @@
#define NAND_VERSION_MINOR_SHIFT 16
/* NAND OP_CMDs */
-#define PAGE_READ 0x2
-#define PAGE_READ_WITH_ECC 0x3
-#define PAGE_READ_WITH_ECC_SPARE 0x4
-#define PROGRAM_PAGE 0x6
-#define PAGE_PROGRAM_WITH_ECC 0x7
-#define PROGRAM_PAGE_SPARE 0x9
-#define BLOCK_ERASE 0xa
-#define FETCH_ID 0xb
-#define RESET_DEVICE 0xd
+#define OP_PAGE_READ 0x2
+#define OP_PAGE_READ_WITH_ECC 0x3
+#define OP_PAGE_READ_WITH_ECC_SPARE 0x4
+#define OP_PROGRAM_PAGE 0x6
+#define OP_PAGE_PROGRAM_WITH_ECC 0x7
+#define OP_PROGRAM_PAGE_SPARE 0x9
+#define OP_BLOCK_ERASE 0xa
+#define OP_FETCH_ID 0xb
+#define OP_RESET_DEVICE 0xd
/* Default Value for NAND_DEV_CMD_VLD */
#define NAND_DEV_CMD_VLD_VAL (READ_START_VLD | WRITE_START_VLD | \
@@ -425,11 +425,11 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read)
if (read) {
if (host->use_ecc)
- cmd = PAGE_READ_WITH_ECC | PAGE_ACC | LAST_PAGE;
+ cmd = OP_PAGE_READ_WITH_ECC | PAGE_ACC | LAST_PAGE;
else
- cmd = PAGE_READ | PAGE_ACC | LAST_PAGE;
+ cmd = OP_PAGE_READ | PAGE_ACC | LAST_PAGE;
} else {
- cmd = PROGRAM_PAGE | PAGE_ACC | LAST_PAGE;
+ cmd = OP_PROGRAM_PAGE | PAGE_ACC | LAST_PAGE;
}
if (host->use_ecc) {
@@ -662,7 +662,7 @@ static int nandc_param(struct qcom_nand_host *host)
* in use. we configure the controller to perform a raw read of 512
* bytes to read onfi params
*/
- nandc_set_reg(nandc, NAND_FLASH_CMD, PAGE_READ | PAGE_ACC | LAST_PAGE);
+ nandc_set_reg(nandc, NAND_FLASH_CMD, OP_PAGE_READ | PAGE_ACC | LAST_PAGE);
nandc_set_reg(nandc, NAND_ADDR0, 0);
nandc_set_reg(nandc, NAND_ADDR1, 0);
nandc_set_reg(nandc, NAND_DEV0_CFG0, 0 << CW_PER_PAGE
@@ -715,7 +715,7 @@ static int erase_block(struct qcom_nand_host *host, int page_addr)
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
nandc_set_reg(nandc, NAND_FLASH_CMD,
- BLOCK_ERASE | PAGE_ACC | LAST_PAGE);
+ OP_BLOCK_ERASE | PAGE_ACC | LAST_PAGE);
nandc_set_reg(nandc, NAND_ADDR0, page_addr);
nandc_set_reg(nandc, NAND_ADDR1, 0);
nandc_set_reg(nandc, NAND_DEV0_CFG0,
@@ -746,7 +746,7 @@ static int read_id(struct qcom_nand_host *host, int column)
if (column == -1)
return 0;
- nandc_set_reg(nandc, NAND_FLASH_CMD, FETCH_ID);
+ nandc_set_reg(nandc, NAND_FLASH_CMD, OP_FETCH_ID);
nandc_set_reg(nandc, NAND_ADDR0, column);
nandc_set_reg(nandc, NAND_ADDR1, 0);
nandc_set_reg(nandc, NAND_FLASH_CHIP_SELECT, DM_EN);
@@ -766,7 +766,7 @@ static int reset(struct qcom_nand_host *host)
struct nand_chip *chip = &host->chip;
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
- nandc_set_reg(nandc, NAND_FLASH_CMD, RESET_DEVICE);
+ nandc_set_reg(nandc, NAND_FLASH_CMD, OP_RESET_DEVICE);
nandc_set_reg(nandc, NAND_EXEC_CMD, 1);
write_reg_dma(nandc, NAND_FLASH_CMD, 1);
--
2.19.1
Powered by blists - more mailing lists