| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1544498901-8744-2-git-send-email-Anson.Huang@nxp.com>
Date: Tue, 11 Dec 2018 03:34:22 +0000
From: Anson Huang <anson.huang@....com>
To: "jic23@...nel.org" <jic23@...nel.org>,
"knaack.h@....de" <knaack.h@....de>,
"lars@...afoo.de" <lars@...afoo.de>,
"pmeerw@...erw.net" <pmeerw@...erw.net>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
"martink@...teo.de" <martink@...teo.de>,
Leonard Crestez <leonard.crestez@....com>,
"rtresidd@...ctromag.com.au" <rtresidd@...ctromag.com.au>,
"gustavo@...eddedor.com" <gustavo@...eddedor.com>,
"linux-iio@...r.kernel.org" <linux-iio@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"festevam@...il.com" <festevam@...il.com>,
"preid@...ctromag.com.au" <preid@...ctromag.com.au>
CC: dl-linux-imx <linux-imx@....com>
Subject: [PATCH V3 2/2] iio: accell: mma8452: add optional vdd/vddio regulator
operation support
The accelerometer's power supply could be controlled by regulator
on some platforms, such as i.MX6Q-SABRESD board, the mma8451's
power supply is controlled by a GPIO fixed regulator, need to make
sure the regulator is enabled before any communication with mma8451,
this patch adds optional vdd/vddio regulator operation support.
Signed-off-by: Anson Huang <Anson.Huang@....com>
Acked-by: Martin Kepplinger <martink@...teo.de>
---
ChangeLog since V2:
- improve the error handling of devm_regulator_get_optional;
- make sure regulators are disabled in error path.
---
drivers/iio/accel/mma8452.c | 186 +++++++++++++++++++++++++++++++++++++++++---
1 file changed, 176 insertions(+), 10 deletions(-)
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 421a0a8..556dbc9 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -31,6 +31,7 @@
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
#define MMA8452_STATUS 0x00
#define MMA8452_STATUS_DRDY (BIT(2) | BIT(1) | BIT(0))
@@ -107,6 +108,8 @@ struct mma8452_data {
u8 data_cfg;
const struct mma_chip_info *chip_info;
int sleep_val;
+ struct regulator *vdd_reg;
+ struct regulator *vddio_reg;
};
/**
@@ -1533,10 +1536,37 @@ static int mma8452_probe(struct i2c_client *client,
data->client = client;
mutex_init(&data->lock);
data->chip_info = match->data;
+ data->vdd_reg = devm_regulator_get_optional(&client->dev, "vdd");
+ if (!IS_ERR(data->vdd_reg)) {
+ ret = regulator_enable(data->vdd_reg);
+ if (ret) {
+ dev_err(&client->dev, "failed to enable VDD regulator\n");
+ return ret;
+ }
+ } else {
+ ret = PTR_ERR(data->vdd_reg);
+ if (ret != -ENODEV)
+ return ret;
+ }
+
+ data->vddio_reg = devm_regulator_get_optional(&client->dev, "vddio");
+ if (!IS_ERR(data->vddio_reg)) {
+ ret = regulator_enable(data->vddio_reg);
+ if (ret) {
+ dev_err(&client->dev, "failed to enable VDDIO regulator\n");
+ if (!IS_ERR(data->vdd_reg))
+ regulator_disable(data->vdd_reg);
+ return ret;
+ }
+ } else {
+ ret = PTR_ERR(data->vddio_reg);
+ if (ret != -ENODEV)
+ return ret;
+ }
ret = i2c_smbus_read_byte_data(client, MMA8452_WHO_AM_I);
if (ret < 0)
- return ret;
+ goto disable_regulators;
switch (ret) {
case MMA8451_DEVICE_ID:
@@ -1549,7 +1579,8 @@ static int mma8452_probe(struct i2c_client *client,
break;
/* else: fall through */
default:
- return -ENODEV;
+ ret = -ENODEV;
+ goto disable_regulators;
}
dev_info(&client->dev, "registering %s accelerometer; ID 0x%x\n",
@@ -1566,13 +1597,13 @@ static int mma8452_probe(struct i2c_client *client,
ret = mma8452_reset(client);
if (ret < 0)
- return ret;
+ goto disable_regulators;
data->data_cfg = MMA8452_DATA_CFG_FS_2G;
ret = i2c_smbus_write_byte_data(client, MMA8452_DATA_CFG,
data->data_cfg);
if (ret < 0)
- return ret;
+ goto disable_regulators;
/*
* By default set transient threshold to max to avoid events if
@@ -1581,7 +1612,7 @@ static int mma8452_probe(struct i2c_client *client,
ret = i2c_smbus_write_byte_data(client, MMA8452_TRANSIENT_THS,
MMA8452_TRANSIENT_THS_MASK);
if (ret < 0)
- return ret;
+ goto disable_regulators;
if (client->irq) {
int irq2;
@@ -1595,7 +1626,7 @@ static int mma8452_probe(struct i2c_client *client,
MMA8452_CTRL_REG5,
data->chip_info->all_events);
if (ret < 0)
- return ret;
+ goto disable_regulators;
dev_dbg(&client->dev, "using interrupt line INT1\n");
}
@@ -1604,11 +1635,11 @@ static int mma8452_probe(struct i2c_client *client,
MMA8452_CTRL_REG4,
data->chip_info->enabled_events);
if (ret < 0)
- return ret;
+ goto disable_regulators;
ret = mma8452_trigger_setup(indio_dev);
if (ret < 0)
- return ret;
+ goto disable_regulators;
}
data->ctrl_reg1 = MMA8452_CTRL_ACTIVE |
@@ -1661,12 +1692,20 @@ static int mma8452_probe(struct i2c_client *client,
trigger_cleanup:
mma8452_trigger_cleanup(indio_dev);
+disable_regulators:
+ if (!IS_ERR(data->vdd_reg))
+ regulator_disable(data->vdd_reg);
+ if (!IS_ERR(data->vddio_reg))
+ regulator_disable(data->vddio_reg);
+
return ret;
}
static int mma8452_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct mma8452_data *data = iio_priv(indio_dev);
+ int ret;
iio_device_unregister(indio_dev);
@@ -1678,6 +1717,21 @@ static int mma8452_remove(struct i2c_client *client)
mma8452_trigger_cleanup(indio_dev);
mma8452_standby(iio_priv(indio_dev));
+ if (!IS_ERR(data->vdd_reg)) {
+ ret = regulator_disable(data->vdd_reg);
+ if (ret) {
+ dev_err(&client->dev, "failed to disable VDD regulator\n");
+ return ret;
+ }
+ }
+ if (!IS_ERR(data->vddio_reg)) {
+ ret = regulator_disable(data->vddio_reg);
+ if (ret) {
+ dev_err(&client->dev, "failed to disable VDDIO regulator\n");
+ return ret;
+ }
+ }
+
return 0;
}
@@ -1696,6 +1750,21 @@ static int mma8452_runtime_suspend(struct device *dev)
return -EAGAIN;
}
+ if (!IS_ERR(data->vdd_reg)) {
+ ret = regulator_disable(data->vdd_reg);
+ if (ret) {
+ dev_err(dev, "failed to disable VDD regulator\n");
+ return ret;
+ }
+ }
+ if (!IS_ERR(data->vddio_reg)) {
+ ret = regulator_disable(data->vddio_reg);
+ if (ret) {
+ dev_err(dev, "failed to disable VDDIO regulator\n");
+ return ret;
+ }
+ }
+
return 0;
}
@@ -1705,6 +1774,23 @@ static int mma8452_runtime_resume(struct device *dev)
struct mma8452_data *data = iio_priv(indio_dev);
int ret, sleep_val;
+ if (!IS_ERR(data->vdd_reg)) {
+ ret = regulator_enable(data->vdd_reg);
+ if (ret) {
+ dev_err(dev, "failed to enable VDD regulator\n");
+ return ret;
+ }
+ }
+ if (!IS_ERR(data->vddio_reg)) {
+ ret = regulator_enable(data->vddio_reg);
+ if (ret) {
+ dev_err(dev, "failed to enable VDDIO regulator\n");
+ if (!IS_ERR(data->vdd_reg))
+ regulator_disable(data->vdd_reg);
+ return ret;
+ }
+ }
+
ret = mma8452_active(data);
if (ret < 0)
return ret;
@@ -1723,14 +1809,94 @@ static int mma8452_runtime_resume(struct device *dev)
#ifdef CONFIG_PM_SLEEP
static int mma8452_suspend(struct device *dev)
{
- return mma8452_standby(iio_priv(i2c_get_clientdata(
+ struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+ struct mma8452_data *data = iio_priv(indio_dev);
+ int ret;
+
+ if (!IS_ERR(data->vdd_reg)) {
+ ret = regulator_enable(data->vdd_reg);
+ if (ret) {
+ dev_err(dev, "failed to enable VDD regulator\n");
+ return ret;
+ }
+ }
+ if (!IS_ERR(data->vddio_reg)) {
+ ret = regulator_enable(data->vddio_reg);
+ if (ret) {
+ dev_err(dev, "failed to enable VDDIO regulator\n");
+ if (!IS_ERR(data->vdd_reg))
+ regulator_disable(data->vdd_reg);
+ return ret;
+ }
+ }
+
+ ret = mma8452_standby(iio_priv(i2c_get_clientdata(
to_i2c_client(dev))));
+ if (ret)
+ return ret;
+
+ if (!IS_ERR(data->vdd_reg)) {
+ ret = regulator_disable(data->vdd_reg);
+ if (ret) {
+ dev_err(dev, "failed to disable VDD regulator\n");
+ return ret;
+ }
+ }
+ if (!IS_ERR(data->vddio_reg)) {
+ ret = regulator_disable(data->vddio_reg);
+ if (ret) {
+ dev_err(dev, "failed to disable VDDIO regulator\n");
+ return ret;
+ }
+ }
+
+ return 0;
}
static int mma8452_resume(struct device *dev)
{
- return mma8452_active(iio_priv(i2c_get_clientdata(
+ struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+ struct mma8452_data *data = iio_priv(indio_dev);
+ int ret;
+
+ if (!IS_ERR(data->vdd_reg)) {
+ ret = regulator_enable(data->vdd_reg);
+ if (ret) {
+ dev_err(dev, "failed to enable VDD regulator\n");
+ return ret;
+ }
+ }
+ if (!IS_ERR(data->vddio_reg)) {
+ ret = regulator_enable(data->vddio_reg);
+ if (ret) {
+ dev_err(dev, "failed to enable VDDIO regulator\n");
+ if (!IS_ERR(data->vdd_reg))
+ regulator_disable(data->vdd_reg);
+ return ret;
+ }
+ }
+
+ ret = mma8452_active(iio_priv(i2c_get_clientdata(
to_i2c_client(dev))));
+ if (ret)
+ return ret;
+
+ if (!IS_ERR(data->vdd_reg)) {
+ ret = regulator_disable(data->vdd_reg);
+ if (ret) {
+ dev_err(dev, "failed to disable VDD regulator\n");
+ return ret;
+ }
+ }
+ if (!IS_ERR(data->vddio_reg)) {
+ ret = regulator_disable(data->vddio_reg);
+ if (ret) {
+ dev_err(dev, "failed to disable VDDIO regulator\n");
+ return ret;
+ }
+ }
+
+ return 0;
}
#endif
--
2.7.4
Powered by blists - more mailing lists