| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAGp9Lzo89syaHWDgtS2JpDzSS-_AAbHENFmXrxttUqcQhMj04g@mail.gmail.com>
Date: Tue, 11 Dec 2018 12:51:32 -0800
From: Sean Wang <sean.wang@...nel.org>
To: zhiyong.tao@...iatek.com
Cc: robh+dt@...nel.org, Linus Walleij <linus.walleij@...aro.org>,
mark.rutland@....com, Matthias Brugger <matthias.bgg@...il.com>,
devicetree@...r.kernel.org, hongkun.cao@...iatek.com,
srv_heupstream@...iatek.com, chuanjia.liu@...iatek.com,
biao.huang@...iatek.com, erin.lo@...iatek.com,
Liguo Zhang <liguo.zhang@...iatek.com>,
linux-kernel@...r.kernel.org, hongzhou.yang@...iatek.com,
linux-mediatek@...ts.infradead.org, linux-gpio@...r.kernel.org,
eddie.huang@...iatek.com, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH] pinctrl: add drive for I2C related pins on MT8183
The subject should be refined to be close to the content
On Tue, Dec 11, 2018 at 12:02 AM Zhiyong Tao <zhiyong.tao@...iatek.com> wrote:
>
> This patch provides the advanced drive for I2C used pins on MT8183.
>
Additionally, you should state more how much strength in mA given on
each step E1, E0 move forward. This way would help to reuse the scheme
on the similar SoCs.
> Signed-off-by: Zhiyong Tao <zhiyong.tao@...iatek.com>
> ---
> drivers/pinctrl/mediatek/pinctrl-mt8183.c | 50 ++++++++++++++++++++++++
> drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c | 45 +++++++++++++++++++++
> drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h | 13 ++++++
> drivers/pinctrl/mediatek/pinctrl-paris.c | 20 ++++++++++
> 4 files changed, 128 insertions(+)
>
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8183.c b/drivers/pinctrl/mediatek/pinctrl-mt8183.c
> index 6262fd3678ea..5244e1b27b1d 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mt8183.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-mt8183.c
> @@ -472,6 +472,51 @@ static const struct mtk_pin_field_calc mt8183_pin_r1_range[] = {
> PIN_FIELD_BASE(133, 133, 8, 0x0D0, 0x10, 13, 1),
> };
>
> +static const struct mtk_pin_field_calc mt8183_pin_drv_en_dis_range[] = {
I'd prefer using the word mt8183_pin_e1e0en_range to keep people away from
be confused the relationship with the existing mt8183_pin_drv_range.
> + PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 20, 1),
> + PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 15, 1),
> + PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 12, 1),
> + PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 7, 1),
> + PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 12, 1),
> + PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 9, 1),
> + PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 19, 1),
> + PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 22, 1),
> + PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 24, 1),
> + PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 14, 1),
> + PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 27, 1),
> + PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 17, 1),
> +};
> +
> +static const struct mtk_pin_field_calc mt8183_pin_drv_e0_range[] = {
Ditto, I'd prefer using the word mt8183_pin_e0_range
> + PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 21, 1),
> + PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 16, 1),
> + PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 13, 1),
> + PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 8, 1),
> + PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 13, 1),
> + PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 10, 1),
> + PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 20, 1),
> + PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 23, 1),
> + PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 25, 1),
> + PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 15, 1),
> + PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 28, 1),
> + PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 18, 1),
> +};
> +
> +static const struct mtk_pin_field_calc mt8183_pin_drv_e1_range[] = {
Ditto, I'd prefer using the word mt8183_pin_e1_range
> + PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 22, 1),
> + PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 17, 1),
> + PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 14, 1),
> + PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 9, 1),
> + PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 14, 1),
> + PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 11, 1),
> + PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 21, 1),
> + PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 24, 1),
> + PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 26, 1),
> + PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 16, 1),
> + PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 29, 1),
> + PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 19, 1),
> +};
> +
> static const struct mtk_pin_reg_calc mt8183_reg_cals[PINCTRL_PIN_REG_MAX] = {
> [PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt8183_pin_mode_range),
> [PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt8183_pin_dir_range),
> @@ -485,6 +530,9 @@ static const struct mtk_pin_reg_calc mt8183_reg_cals[PINCTRL_PIN_REG_MAX] = {
> [PINCTRL_PIN_REG_PUPD] = MTK_RANGE(mt8183_pin_pupd_range),
> [PINCTRL_PIN_REG_R0] = MTK_RANGE(mt8183_pin_r0_range),
> [PINCTRL_PIN_REG_R1] = MTK_RANGE(mt8183_pin_r1_range),
> + [PINCTRL_PIN_REG_DRV_EN_DIS] = MTK_RANGE(mt8183_pin_drv_en_dis_range),
> + [PINCTRL_PIN_REG_DRV_E0] = MTK_RANGE(mt8183_pin_drv_e0_range),
> + [PINCTRL_PIN_REG_DRV_E1] = MTK_RANGE(mt8183_pin_drv_e1_range),
> };
>
> static const char * const mt8183_pinctrl_register_base_names[] = {
> @@ -517,6 +565,8 @@ static const struct mtk_pin_soc mt8183_data = {
> .drive_get = mtk_pinconf_drive_get_rev1,
> .adv_pull_get = mtk_pinconf_adv_pull_get,
> .adv_pull_set = mtk_pinconf_adv_pull_set,
> + .adv_drive_get = mtk_pinconf_adv_drive_get,
> + .adv_drive_set = mtk_pinconf_adv_drive_set,
DT property drive-strength is generic enough to all SoCs so we don't
need to create extra callbacks to serve the extra property about the
driving adjustment.
And DRV register working for i2c pins 48-51, 81-84 and 103-106 implies
that E1 and E0 work like more an extra fine adjustment related to DRV
register have done to give more accurate strength than only DRV
register can support. Thus, DRV, E0, and E1 should be more
consolidated to in the same function instead of making them apart.
If we know how much driving strength on each step of e1, e0, it would
be easy to add E1 and E0 support into current driving adjustment
procedure mtk_pinconf_drive_set_rev1 and mtk_pinconf_drive_get_rev1.
> };
>
> static const struct of_device_id mt8183_pinctrl_of_match[] = {
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
> index 4a9e0d4c2bbc..da024279ec59 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
> @@ -668,3 +668,48 @@ int mtk_pinconf_adv_pull_get(struct mtk_pinctrl *hw,
>
> return 0;
> }
> +
> +int mtk_pinconf_adv_drive_set(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc, bool enable,
> + u32 arg)
> +{
> + int err;
> +
> + err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_E0, arg & 1);
> + if (err)
> + return 0;
> +
> + err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_E1,
> + !!(arg & 2));
> + if (err)
> + return 0;
> +
> + arg = enable ? 1 : 0;
> +
> + err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_EN_DIS, arg);
> +
> + return err;
> +}
> +
> +int mtk_pinconf_adv_drive_get(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc, u32 *val)
> +{
> + u32 en, e0, e1;
> + int err;
> +
> + err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_EN_DIS, &en);
> + if (err)
> + return err;
> +
> + err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_E0, &e0);
> + if (err)
> + return err;
> +
> + err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_E1, &e1);
> + if (err)
> + return err;
> +
> + *val = (e0 | e1 << 1 | en << 2) & 0x7;
> +
> + return 0;
> +}
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
> index 6d24522739d9..795a3b10d54e 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
> +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
> @@ -63,6 +63,9 @@ enum {
> PINCTRL_PIN_REG_IES,
> PINCTRL_PIN_REG_PULLEN,
> PINCTRL_PIN_REG_PULLSEL,
> + PINCTRL_PIN_REG_DRV_EN_DIS,
> + PINCTRL_PIN_REG_DRV_E0,
> + PINCTRL_PIN_REG_DRV_E1,
> PINCTRL_PIN_REG_MAX,
> };
>
> @@ -224,6 +227,11 @@ struct mtk_pin_soc {
> int (*adv_pull_get)(struct mtk_pinctrl *hw,
> const struct mtk_pin_desc *desc, bool pullup,
> u32 *val);
> + int (*adv_drive_set)(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc, bool enable,
> + u32 arg);
> + int (*adv_drive_get)(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc, u32 *val);
>
> /* Specific driver data */
> void *driver_data;
> @@ -287,5 +295,10 @@ int mtk_pinconf_adv_pull_set(struct mtk_pinctrl *hw,
> int mtk_pinconf_adv_pull_get(struct mtk_pinctrl *hw,
> const struct mtk_pin_desc *desc, bool pullup,
> u32 *val);
> +int mtk_pinconf_adv_drive_set(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc, bool enable,
> + u32 arg);
> +int mtk_pinconf_adv_drive_get(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc, u32 *val);
>
> #endif /* __PINCTRL_MTK_COMMON_V2_H */
> diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
> index d2179028f134..ef4ccaa59e55 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-paris.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
> @@ -20,12 +20,16 @@
> #define MTK_PIN_CONFIG_RDSEL (PIN_CONFIG_END + 2)
> #define MTK_PIN_CONFIG_PU_ADV (PIN_CONFIG_END + 3)
> #define MTK_PIN_CONFIG_PD_ADV (PIN_CONFIG_END + 4)
> +#define MTK_PIN_CONFIG_DRV_EN_ADV (PIN_CONFIG_END + 5)
> +#define MTK_PIN_CONFIG_DRV_DIS_ADV (PIN_CONFIG_END + 6)
>
> static const struct pinconf_generic_params mtk_custom_bindings[] = {
> {"mediatek,tdsel", MTK_PIN_CONFIG_TDSEL, 0},
> {"mediatek,rdsel", MTK_PIN_CONFIG_RDSEL, 0},
> {"mediatek,pull-up-adv", MTK_PIN_CONFIG_PU_ADV, 1},
> {"mediatek,pull-down-adv", MTK_PIN_CONFIG_PD_ADV, 1},
> + {"mediatek,drive-enable-adv", MTK_PIN_CONFIG_DRV_EN_ADV, 2},
> + {"mediatek,drive-disable-adv", MTK_PIN_CONFIG_DRV_DIS_ADV, 2},
> };
>
> #ifdef CONFIG_DEBUG_FS
> @@ -34,6 +38,8 @@ static const struct pin_config_item mtk_conf_items[] = {
> PCONFDUMP(MTK_PIN_CONFIG_RDSEL, "rdsel", NULL, true),
> PCONFDUMP(MTK_PIN_CONFIG_PU_ADV, "pu-adv", NULL, true),
> PCONFDUMP(MTK_PIN_CONFIG_PD_ADV, "pd-adv", NULL, true),
> + PCONFDUMP(MTK_PIN_CONFIG_DRV_EN_ADV, "drive-enable-adv", NULL, true),
> + PCONFDUMP(MTK_PIN_CONFIG_DRV_DIS_ADV, "drive-disable-adv", NULL, true),
> };
> #endif
>
> @@ -311,6 +317,20 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
> return -ENOTSUPP;
> }
> break;
> + case MTK_PIN_CONFIG_DRV_EN_ADV:
> + case MTK_PIN_CONFIG_DRV_DIS_ADV:
> + if (hw->soc->adv_drive_set) {
> + bool enable;
> +
> + enable = param == MTK_PIN_CONFIG_DRV_EN_ADV;
> + err = hw->soc->adv_drive_set(hw, desc, enable,
> + arg);
> + if (err)
> + return err;
> + } else {
> + return -ENOTSUPP;
> + }
> + break;
> default:
> err = -ENOTSUPP;
> }
> --
> 2.12.5
>
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
Powered by blists - more mailing lists