[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20181211053536.GJ6707@atomide.com>
Date: Mon, 10 Dec 2018 21:35:36 -0800
From: Tony Lindgren <tony@...mide.com>
To: Kuninori Morimoto <kuninori.morimoto.gx@...esas.com>
Cc: Mark Brown <broonie@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>,
"alsa-devel@...a-project.org" <alsa-devel@...a-project.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-omap@...r.kernel.org" <linux-omap@...r.kernel.org>,
Sebastian Reichel <sre@...nel.org>,
Jarkko Nikula <jarkko.nikula@...mer.com>,
Peter Ujfalusi <peter.ujfalusi@...com>
Subject: Re: [PATCH 0/2] Graph fixes for using multiple endpoints per port
* Kuninori Morimoto <kuninori.morimoto.gx@...esas.com> [181211 05:16]:
>
> Hi Tony
>
> > > This looks a little bit strange for me.
> > > Can you show me your DT for it ?
> >
> > Sure, adding also Sebastian to Cc. Here's what I currently have for droid 4
> > dts with two codecs on I2S. Please just ignore the GNSS parts there..
> >
> > The TDM configuration is all done in the cpcap_audio_codec via set_tdm_slot().
> > The modem voice call codec is a serdev driver :) I'll need some more time to
> > be able to post patches but it's basically working for voice calls.
>
> Hmm... it seems strange...
> I guess you are using "ti,omap4-mcbsp" driver (= linux/sound/soc/omap/omap-mcbsp.c)
> Is this correct ?
Yes.
> If so, your driver is registering component as
>
> ret = devm_snd_soc_register_component(&pdev->dev,
> &omap_mcbsp_component,
> &omap_mcbsp_dai, 1);
>
> Your driver has only 1 DAI.
Yes I have a patch for omap-mcbsp.c too :)
> > mcbsp3_port: port {
> > - cpu_dai3: endpoint {
> > + cpu_dai3: endpoint@0 {
> > dai-format = "dsp_a";
> > frame-master = <&cpcap_audio_codec1>;
> > bitclock-master = <&cpcap_audio_codec1>;
> > remote-endpoint = <&cpcap_audio_codec1>;
> > };
> > + cpu_dai_mdm: endpoint@1 {
> > + dai-format = "dsp_a";
> > + frame-master = <&cpcap_audio_codec1>;
> > + bitclock-master = <&cpcap_audio_codec1>;
> > + remote-endpoint = <&mot_mdm6600_audio_codec0>;
> > + };
>
> And here, you have 1 port, 2 endpoint.
> Then, asoc_simple_card_get_dai_id() should return 1.
>
> And, your [2/2] patch,
> I guess you are misunderstanding about "port" vs "endpoint",
> or omap-mcbsp driver side need to update ?
Yes omap-mcbsp driver needs to be updated for multiple endpoints.
Adding Jarkko and Peter also to Cc, below is the WIP patch that I'm
currently using for omap-mcbsp to add more DAIs.
So far nothing else to do in the omap-mcbsp as it's the cpcap hardware
that configures the TDM timeslots. And I'm currently assuming the
first instance is the master, I guess that should be parsed from the
the frame-master dts property instead.
Regards,
Tony
8< ----------------------
diff --git a/sound/soc/omap/omap-mcbsp-priv.h b/sound/soc/omap/omap-mcbsp-priv.h
--- a/sound/soc/omap/omap-mcbsp-priv.h
+++ b/sound/soc/omap/omap-mcbsp-priv.h
@@ -262,6 +262,8 @@ struct omap_mcbsp {
struct omap_mcbsp_platform_data *pdata;
struct omap_mcbsp_st_data *st_data;
struct omap_mcbsp_reg_cfg cfg_regs;
+ struct snd_soc_dai_driver *dais;
+ int dai_count;
struct snd_dmaengine_dai_dma_data dma_data[2];
unsigned int dma_req[2];
int dma_op_mode;
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -28,6 +28,7 @@
#include <linux/pm_runtime.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/of_graph.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -1318,23 +1319,53 @@ static int omap_mcbsp_remove(struct snd_soc_dai *dai)
return 0;
}
-static struct snd_soc_dai_driver omap_mcbsp_dai = {
- .probe = omap_mcbsp_probe,
- .remove = omap_mcbsp_remove,
- .playback = {
- .channels_min = 1,
- .channels_max = 16,
- .rates = OMAP_MCBSP_RATES,
- .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,
- },
- .capture = {
- .channels_min = 1,
- .channels_max = 16,
- .rates = OMAP_MCBSP_RATES,
- .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,
- },
- .ops = &mcbsp_dai_ops,
-};
+static int omap_mcbsp_init_dais(struct omap_mcbsp *mcbsp)
+{
+ struct device_node *np = mcbsp->dev->of_node;
+ int i;
+
+ if (np)
+ mcbsp->dai_count = of_graph_get_endpoint_count(np);
+
+ if (!mcbsp->dai_count)
+ mcbsp->dai_count = 1;
+
+ mcbsp->dais = devm_kcalloc(mcbsp->dev, mcbsp->dai_count,
+ sizeof(*mcbsp->dais), GFP_KERNEL);
+ if (!mcbsp->dais)
+ return -ENOMEM;
+
+ for (i = 0; i < mcbsp->dai_count; i++) {
+ struct snd_soc_dai_driver *dai = &mcbsp->dais[i];
+
+ dai->name = devm_kasprintf(mcbsp->dev, GFP_KERNEL, "%s-dai%i",
+ dev_name(mcbsp->dev), i);
+
+ if (i == 0) {
+ dai->probe = omap_mcbsp_probe;
+ dai->remove = omap_mcbsp_remove;
+ dai->ops = &mcbsp_dai_ops;
+ }
+ dai->playback.channels_min = 1;
+ dai->playback.channels_max = 16;
+ dai->playback.rates = OMAP_MCBSP_RATES;
+ if (mcbsp->pdata->reg_size == 2)
+ dai->playback.formats = SNDRV_PCM_FMTBIT_S16_LE;
+ else
+ dai->playback.formats = SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S32_LE;
+ dai->capture.channels_min = 1;
+ dai->capture.channels_max = 16;
+ dai->capture.rates = OMAP_MCBSP_RATES;
+ if (mcbsp->pdata->reg_size == 2)
+ dai->capture.formats = SNDRV_PCM_FMTBIT_S16_LE;
+ else
+ dai->capture.formats = SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S32_LE;
+ }
+
+ return 0;
+}
static const struct snd_soc_component_driver omap_mcbsp_component = {
.name = "omap-mcbsp",
@@ -1423,18 +1454,17 @@ static int asoc_mcbsp_probe(struct platform_device *pdev)
mcbsp->dev = &pdev->dev;
platform_set_drvdata(pdev, mcbsp);
- ret = omap_mcbsp_init(pdev);
+ ret = omap_mcbsp_init_dais(mcbsp);
if (ret)
return ret;
- if (mcbsp->pdata->reg_size == 2) {
- omap_mcbsp_dai.playback.formats = SNDRV_PCM_FMTBIT_S16_LE;
- omap_mcbsp_dai.capture.formats = SNDRV_PCM_FMTBIT_S16_LE;
- }
+ ret = omap_mcbsp_init(pdev);
+ if (ret)
+ return ret;
ret = devm_snd_soc_register_component(&pdev->dev,
&omap_mcbsp_component,
- &omap_mcbsp_dai, 1);
+ mcbsp->dais, mcbsp->dai_count);
if (ret)
return ret;
Powered by blists - more mailing lists