| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAMty3ZAv1dHCRCShXYbxqMm4wV9WGDpAKPji+3G21eWq34ODaA@mail.gmail.com>
Date: Fri, 14 Dec 2018 00:56:03 +0530
From: Jagan Teki <jagan@...rulasolutions.com>
To: Sean Paul <sean@...rly.run>
Cc: Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <maxime.ripard@...tlin.com>,
David Airlie <airlied@...ux.ie>,
Rob Herring <robh+dt@...nel.org>, Chen-Yu Tsai <wens@...e.org>,
Icenowy Zheng <icenowy@...c.io>,
Jernej Skrabec <jernej.skrabec@...l.net>,
Vasily Khoruzhick <anarsoul@...il.com>,
Thierry Reding <thierry.reding@...il.com>,
Mark Rutland <mark.rutland@....com>,
dri-devel <dri-devel@...ts.freedesktop.org>,
devicetree <devicetree@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
Michael Trimarchi <michael@...rulasolutions.com>,
TL Lim <tllim@...e64.org>,
linux-sunxi <linux-sunxi@...glegroups.com>,
linux-amarula@...rulasolutions.com
Subject: Re: [PATCH v2 11/12] drm/panel: Add Feiyang FY07024DI26A30-D MIPI-DSI
LCD panel
On Thu, Dec 13, 2018 at 8:37 PM Sean Paul <sean@...rly.run> wrote:
>
> On Fri, Nov 16, 2018 at 10:09:15PM +0530, Jagan Teki wrote:
> > Feiyang FY07024DI26A30-D is 1024x600, 4-lane MIPI-DSI LCD panel.
> >
> > Add panel driver for it.
> >
> > Signed-off-by: Jagan Teki <jagan@...rulasolutions.com>
> > ---
> > MAINTAINERS | 6 +
> > drivers/gpu/drm/panel/Kconfig | 9 +
> > drivers/gpu/drm/panel/Makefile | 1 +
> > .../drm/panel/panel-feiyang-fy07024di26a30d.c | 286 ++++++++++++++++++
> > 4 files changed, 302 insertions(+)
> > create mode 100644 drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 3dac08d0b3cb..40c8bfc974f4 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -4620,6 +4620,12 @@ T: git git://anongit.freedesktop.org/drm/drm-misc
> > S: Maintained
> > F: drivers/gpu/drm/tve200/
> >
> > +DRM DRIVER FOR FEIYANG FY07024DI26A30-D MIPI-DSI LCD PANELS
> > +M: Jagan Teki <jagan@...rulasolutions.com>
> > +S: Maintained
> > +F: drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
> > +F: Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt
> > +
> > DRM DRIVER FOR ILITEK ILI9225 PANELS
> > M: David Lechner <david@...hnology.com>
> > S: Maintained
> > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> > index d0d4e60f5153..bc70896fe43c 100644
> > --- a/drivers/gpu/drm/panel/Kconfig
> > +++ b/drivers/gpu/drm/panel/Kconfig
> > @@ -47,6 +47,15 @@ config DRM_PANEL_SIMPLE
> > that it can be automatically turned off when the panel goes into a
> > low power state.
> >
> > +config DRM_PANEL_FEIYANG_FY07024DI26A30D
> > + tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
> > + depends on OF
> > + depends on DRM_MIPI_DSI
> > + depends on BACKLIGHT_CLASS_DEVICE
> > + help
> > + Say Y if you want to enable support for panels based on the
> > + Feiyang FY07024DI26A30-D MIPI-DSI interface.
> > +
> > config DRM_PANEL_ILITEK_IL9322
> > tristate "Ilitek ILI9322 320x240 QVGA panels"
> > depends on OF && SPI
> > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> > index 88011f06edb8..e23c017639c7 100644
> > --- a/drivers/gpu/drm/panel/Makefile
> > +++ b/drivers/gpu/drm/panel/Makefile
> > @@ -3,6 +3,7 @@ obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o
> > obj-$(CONFIG_DRM_PANEL_BANANAPI_S070WV20_ICN6211) += panel-bananapi-s070wv20-icn6211.o
> > obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
> > obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
> > +obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o
> > obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o
> > obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o
> > obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
> > diff --git a/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
> > new file mode 100644
> > index 000000000000..a4b46bd8fdbe
> > --- /dev/null
> > +++ b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
> > @@ -0,0 +1,286 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright (C) 2018 Amarula Solutions
> > + * Author: Jagan Teki <jagan@...rulasolutions.com>
> > + */
> > +
> > +#include <linux/backlight.h>
> > +#include <linux/delay.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/regulator/consumer.h>
> > +
> > +#include <drm/drmP.h>
> > +#include <drm/drm_mipi_dsi.h>
> > +#include <drm/drm_panel.h>
> > +
> > +struct feiyang {
> > + struct drm_panel panel;
> > + struct mipi_dsi_device *dsi;
> > +
> > + struct backlight_device *backlight;
> > + struct regulator *dvdd;
> > + struct regulator *avdd;
> > + struct gpio_desc *reset;
> > +};
> > +
> > +static inline struct feiyang *panel_to_feiyang(struct drm_panel *panel)
> > +{
> > + return container_of(panel, struct feiyang, panel);
> > +}
> > +
> > +struct feiyang_init_cmd {
> > + size_t len;
> > + const char *data;
> > +};
> > +
> > +#define FY07024DI26A30D(...) { \
> > + .len = sizeof((char[]){__VA_ARGS__}), \
> > + .data = (char[]){__VA_ARGS__} }
> > +
> > +static const struct feiyang_init_cmd feiyang_init_cmds[] = {
> > + FY07024DI26A30D(0x80, 0x58),
> > + FY07024DI26A30D(0x81, 0x47),
> > + FY07024DI26A30D(0x82, 0xD4),
> > + FY07024DI26A30D(0x83, 0x88),
> > + FY07024DI26A30D(0x84, 0xA9),
> > + FY07024DI26A30D(0x85, 0xC3),
> > + FY07024DI26A30D(0x86, 0x82),
> > +};
>
> These init cmds don't have to be so complicated. You've only got len == 2, so
> just hardcode it in and avoid the macro:
>
> #define FEIYANG_INIT_CMD_LEN 2
>
> struct feiyang_init_cmd {
> u8 data[FEIYANG_INIT_CMD];
> };
>
> static const struct feiyang_init_cmd feiyang_init_cmds[] = {
> { .data = { 0x80, 0x58 } },
> ...
> };
>
> > +
> > +static int feiyang_prepare(struct drm_panel *panel)
> > +{
> > + struct feiyang *ctx = panel_to_feiyang(panel);
> > + struct mipi_dsi_device *dsi = ctx->dsi;
> > + unsigned int i;
> > + int ret;
> > +
> > + ret = regulator_enable(ctx->dvdd);
> > + if (ret)
> > + return ret;
> > +
> > + msleep(100);
>
> nit: You should do your best to correlate the sleeps with the timing parameters
> from the datasheet with a comment.
>
> ie:
> /* T1: > 100ms */
> msleep(100);
Sorry, what does this mean?
>
> > +
> > + ret = regulator_enable(ctx->avdd);
> > + if (ret)
> > + return ret;
> > +
> > + msleep(20);
> > +
> > + gpiod_set_value(ctx->reset, 1);
> > + msleep(50);
> > +
> > + gpiod_set_value(ctx->reset, 0);
> > + msleep(20);
> > +
> > + gpiod_set_value(ctx->reset, 1);
> > + msleep(200);
> > +
> > + for (i = 0; i < ARRAY_SIZE(feiyang_init_cmds); i++) {
> > + const struct feiyang_init_cmd *cmd =
> > + &feiyang_init_cmds[i];
> > +
> > + ret = mipi_dsi_dcs_write_buffer(dsi, cmd->data, cmd->len);
>
> ret = mipi_dsi_dcs_write_buffer(dsi, cmd->data,
> FEIYANG_INIT_CMD_LEN);
>
> > + if (ret < 0)
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int feiyang_enable(struct drm_panel *panel)
> > +{
> > + struct feiyang *ctx = panel_to_feiyang(panel);
> > +
> > + msleep(120);
> > +
> > + mipi_dsi_dcs_set_display_on(ctx->dsi);
> > + backlight_enable(ctx->backlight);
> > +
> > + return 0;
> > +}
> > +
> > +static int feiyang_disable(struct drm_panel *panel)
> > +{
> > + struct feiyang *ctx = panel_to_feiyang(panel);
> > +
> > + backlight_disable(ctx->backlight);
> > + return mipi_dsi_dcs_set_display_on(ctx->dsi);
>
> set_display_on? You probably want set_display_off here :)
>
> > +}
> > +
> > +static int feiyang_unprepare(struct drm_panel *panel)
> > +{
> > + struct feiyang *ctx = panel_to_feiyang(panel);
> > + int ret;
> > +
> > + ret = mipi_dsi_dcs_set_display_off(ctx->dsi);
> > + if (ret < 0)
> > + DRM_DEV_ERROR(panel->dev, "failed to set display off: %d\n",
> > + ret);
> > +
> > + ret = mipi_dsi_dcs_enter_sleep_mode(ctx->dsi);
> > + if (ret < 0)
> > + DRM_DEV_ERROR(panel->dev, "failed to enter sleep mode: %d\n",
> > + ret);
> > +
> > + msleep(100);
> > +
> > + regulator_disable(ctx->avdd);
> > +
> > + regulator_disable(ctx->dvdd);
> > +
> > + gpiod_set_value(ctx->reset, 0);
> > +
> > + gpiod_set_value(ctx->reset, 1);
> > +
> > + gpiod_set_value(ctx->reset, 0);
>
> Presumably this reset line toggle isn't needed since the rails are already
> disabled?
Yes, rails need to reset and turn off. will swap.
>
> > +
> > + return 0;
> > +}
> > +
> > +static const struct drm_display_mode feiyang_default_mode = {
> > + .clock = 55000,
> > + .vrefresh = 60,
>
> This doesn't add up correctly. The pixel clock should be equal to:
>
> (htotal * vtotal * vrefresh) / 1000
>
> For this reason, we usually don't specify the refresh rate since it can be
> misleading. Your actual refresh rate with the pixel clock you specified is
> actually going to be 56.2Hz instead of the 60 you want.
The actual BSP do work 55MHz[1], I do specify refresh rate unnecessarily.
[1] https://gitlab.com/pine64-android/tools/blob/01b3d9388439106bdd9985cf738c1b876bd617d3/pack/chips/sun50iw1p1/configs/db1000_lcd/sys_config_rgmii.fex#L483
Powered by blists - more mailing lists