linux-kernel - [PATCH AUTOSEL 4.19 15/73] drm/msm/dsi: configure VCO rate for 10nm PLL driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20181213042838.75160-15-sashal@kernel.org>
Date:   Wed, 12 Dec 2018 23:27:40 -0500
From:   Sasha Levin <sashal@...nel.org>
To:     linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc:     Abhinav Kumar <abhinavk@...eaurora.org>,
        Sean Paul <seanpaul@...omium.org>,
        Rob Clark <robdclark@...il.com>,
        Sasha Levin <sashal@...nel.org>, linux-arm-msm@...r.kernel.org,
        dri-devel@...ts.freedesktop.org, freedreno@...ts.freedesktop.org
Subject: [PATCH AUTOSEL 4.19 15/73] drm/msm/dsi: configure VCO rate for 10nm PLL driver

From: Abhinav Kumar <abhinavk@...eaurora.org>

[ Upstream commit 8531f0587f5c9e1a74cd9543a97617349f5e0706 ]

Currenty the VCO rate in the 10nm PLL driver relies
on the parent rate which is not configured.

Configure the VCO rate to 19.2 Mhz as required by
the 10nm PLL driver.

Signed-off-by: Abhinav Kumar <abhinavk@...eaurora.org>
Signed-off-by: Sean Paul <seanpaul@...omium.org>
Signed-off-by: Rob Clark <robdclark@...il.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
index 4c03f0b7343e..41bec570c518 100644
--- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
+++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
@@ -39,6 +39,8 @@
 #define DSI_PIXEL_PLL_CLK		1
 #define NUM_PROVIDED_CLKS		2
 
+#define VCO_REF_CLK_RATE		19200000
+
 struct dsi_pll_regs {
 	u32 pll_prop_gain_rate;
 	u32 pll_lockdet_rate;
@@ -316,7 +318,7 @@ static int dsi_pll_10nm_vco_set_rate(struct clk_hw *hw, unsigned long rate,
 	    parent_rate);
 
 	pll_10nm->vco_current_rate = rate;
-	pll_10nm->vco_ref_clk_rate = parent_rate;
+	pll_10nm->vco_ref_clk_rate = VCO_REF_CLK_RATE;
 
 	dsi_pll_setup_config(pll_10nm);
 
-- 
2.19.1