linux-kernel - [PATCH v13 0/3] PPS: pps-gpio PPS ECHO implementation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 14 Dec 2018 13:30:16 +1100
From:   Tom Burkart <tom@...sec.com>
To:     Linux kernel mailing list <linux-kernel@...r.kernel.org>
Cc:     Tom Burkart <tom@...sec.com>,
        Rodolfo Giometti <giometti@...eenne.com>,
        Ricardo Martins <rasm@...up.pt>,
        James Nuss <jamesnuss@...ometrics.ca>
Subject: [PATCH v13 0/3] PPS: pps-gpio PPS ECHO implementation

Hi all,
please find attached the PPS-GPIO PPS ECHO implementation patch. The
driver claims to have echo functionality in the sysfs interface but this
functionality is not present.  This patch provides this functionality.

Part 1 of the patch change the original driver from the number
based GPIO ABI to the descriptor based ABI.

Parts 2 and 3 then add the PPS ECHO functionality.  This is enabled if a
"echo-gpios" entry is found in the devicetree.

Changes in v10:
Changes requested by Philipp Zabel:
Mostly cosmetic changes: PATCH 2/4 now reviewed.  Thanks a lot, Philipp!
(Please note that as of v11 PATCH 1 is gone so this has become PATCH 1)

Change in v11:
Change requested by Rob Herring:
All changes in regard to the capture-clear DT entry are gone.

Change in v12:
Change requested by Rob Herring:
Deleted superfluous use of invert-pps-echo

Change in v13:
Patch 2/3 (DT bindings) now reviewed. Thanks a lot, Rob!

On the linuxpps mailing list it was suggested to use a hrtimer for
resetting the GPIO ECHO active state to the inactive state.
Please also comment on whether a hrtimer is necessary/desirable for the
purpose of resetting the echo pin active state.  I am happy to implement
it if this is useful/desirable.

Please install, test and comment as it is now a quite major change to
the driver.
Suggestions for improvement are welcome.

Tom Burkart

Tom Burkart (3):
  pps: descriptor-based gpio
  dt-bindings: pps: pps-gpio PPS ECHO implementation
  pps: pps-gpio pps-echo implementation

 Documentation/devicetree/bindings/pps/pps-gpio.txt |   7 +
 drivers/pps/clients/pps-gpio.c                     | 159 ++++++++++++++++-----
 include/linux/pps-gpio.h                           |   5 +-
 3 files changed, 131 insertions(+), 40 deletions(-)

-- 
2.12.3