linux-kernel - [PATCH 0/6] Add support of the HBA mode on HP Smart Array P410i controllers

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20181214132115.21440-1-mironov.ivan@gmail.com>
Date:   Fri, 14 Dec 2018 18:21:09 +0500
From:   Ivan Mironov <mironov.ivan@...il.com>
To:     linux-scsi@...r.kernel.org, mironov.ivan@...il.com
Cc:     linux-kernel@...r.kernel.org, Don Brace <don.brace@...rosemi.com>,
        "James E.J. Bottomley" <jejb@...ux.vnet.ibm.com>,
        "Martin K. Petersen" <martin.petersen@...cle.com>,
        esc.storagedev@...rosemi.com
Subject: [PATCH 0/6] Add support of the HBA mode on HP Smart Array P410i controllers

This series of patches adds support of the HBA mode on HP Smart Array
P410i RAID controllers.

This is not guaranteed to be correct as I do not have any access to
documentation on these controllers. However, this works fine for me
on hardware that I have. Also, these changes successfully passes blktests[1]
and xfstests[2].

To make sure that this new functionality does not break anything, it is
disabled by default and may be enabled only manually using new module
parameter.

[1] https://github.com/osandov/blktests
[2] https://git.kernel.org/pub/scm/fs/xfs/xfstests-dev.git

Ivan Mironov (6):
  scsi: hpsa: Add function to check if device is a disk or a zoned
    device
  scsi: hpsa: Support HBA mode on HP Smart Array P410i controllers
  scsi: hpsa: Add/mask existing devices on rescan if visibility changes
  scsi: hpsa: Ignore HBA flag from NVRAM if logical devices exist
  scsi: hpsa: Name more fields in "struct bmic_identify_controller"
  scsi: hpsa: Do not use HBA flag from NVRAM if HBA is not supported

 drivers/scsi/hpsa.c     | 145 ++++++++++++++++++++++++++++++++++++----
 drivers/scsi/hpsa.h     |   3 +
 drivers/scsi/hpsa_cmd.h | 113 ++++++++++++++++++++++++++++++-
 3 files changed, 244 insertions(+), 17 deletions(-)

-- 
2.19.2