[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20181217144713.GR17972@bigcity.dyn.berto.se>
Date: Mon, 17 Dec 2018 15:47:13 +0100
From: Niklas Söderlund
<niklas.soderlund@...natech.se>
To: Fabrizio Castro <fabrizio.castro@...renesas.com>
Cc: Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
linux-media@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Simon Horman <horms@...ge.net.au>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Chris Paterson <Chris.Paterson2@...esas.com>,
Biju Das <biju.das@...renesas.com>
Subject: Re: [PATCH] media: dt-bindings: rcar-vin: Add R8A774C0 support
Hi Fabrizio,
Thanks for your patch.
On 2018-12-13 20:21:59 +0000, Fabrizio Castro wrote:
> Add the compatible string for RZ/G2E (a.k.a. R8A774C0) to the list
> of SoCs supported by rcar-vin driver.
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro@...renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@...natech.se>
> ---
> Documentation/devicetree/bindings/media/rcar_vin.txt | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt
> index 7c878ca..34dcd28 100644
> --- a/Documentation/devicetree/bindings/media/rcar_vin.txt
> +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt
> @@ -7,12 +7,13 @@ family of devices.
> Each VIN instance has a single parallel input that supports RGB and YUV video,
> with both external synchronization and BT.656 synchronization for the latter.
> Depending on the instance the VIN input is connected to external SoC pins, or
> -on Gen3 platforms to a CSI-2 receiver.
> +on Gen3 and RZ/G2 platforms to a CSI-2 receiver.
>
> - compatible: Must be one or more of the following
> - "renesas,vin-r8a7743" for the R8A7743 device
> - "renesas,vin-r8a7744" for the R8A7744 device
> - "renesas,vin-r8a7745" for the R8A7745 device
> + - "renesas,vin-r8a774c0" for the R8A774C0 device
> - "renesas,vin-r8a7778" for the R8A7778 device
> - "renesas,vin-r8a7779" for the R8A7779 device
> - "renesas,vin-r8a7790" for the R8A7790 device
> @@ -60,10 +61,10 @@ The per-board settings Gen2 platforms:
> - data-enable-active: polarity of CLKENB signal, see [1] for
> description. Default is active high.
>
> -The per-board settings Gen3 platforms:
> +The per-board settings Gen3 and RZ/G2 platforms:
>
> -Gen3 platforms can support both a single connected parallel input source
> -from external SoC pins (port@0) and/or multiple parallel input sources
> +Gen3 and RZ/G2 platforms can support both a single connected parallel input
> +source from external SoC pins (port@0) and/or multiple parallel input sources
> from local SoC CSI-2 receivers (port@1) depending on SoC.
>
> - renesas,id - ID number of the VIN, VINx in the documentation.
> --
> 2.7.4
>
--
Regards,
Niklas Söderlund
Powered by blists - more mailing lists