linux-kernel - [PATCH v3 13/15] Bluetooth: btbcm: Add default address for BCM43430A0

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20181217040449.31437-14-wens@csie.org>
Date:   Mon, 17 Dec 2018 12:04:47 +0800
From:   Chen-Yu Tsai <wens@...e.org>
To:     Marcel Holtmann <marcel@...tmann.org>,
        Johan Hedberg <johan.hedberg@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Maxime Ripard <maxime.ripard@...tlin.com>
Cc:     Chen-Yu Tsai <wens@...e.org>,
        Loic Poulain <loic.poulain@...il.com>,
        linux-bluetooth@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH v3 13/15] Bluetooth: btbcm: Add default address for BCM43430A0

The BCM43430A0 has the default MAC address 43:43:A0:12:1F:AC if none
is given. This address was found when enabling Bluetooth on a bunch of
boards with the AMPAK AP6210 module, all sharing the same address. It
also contains the sequence 4343A0, which is suspicious as that is also
the name the chip identifies itself as.

Add this to the list of default MAC addresses and leave it to the user
to configure a valid one.

Signed-off-by: Chen-Yu Tsai <wens@...e.org>
---
 drivers/bluetooth/btbcm.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index 22d4b530da03..08e1f3dd4e03 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -34,6 +34,7 @@
 
 #define BDADDR_BCM20702A0 (&(bdaddr_t) {{0x00, 0xa0, 0x02, 0x70, 0x20, 0x00}})
 #define BDADDR_BCM20702A1 (&(bdaddr_t) {{0x00, 0x00, 0xa0, 0x02, 0x70, 0x20}})
+#define BDADDR_BCM43430A0 (&(bdaddr_t) {{0xac, 0x1f, 0x12, 0xa0, 0x43, 0x43}})
 #define BDADDR_BCM4324B3 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb3, 0x24, 0x43}})
 #define BDADDR_BCM4330B1 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb1, 0x30, 0x43}})
 
@@ -73,11 +74,15 @@ int btbcm_check_bdaddr(struct hci_dev *hdev)
 	 *
 	 * The address 43:30:B1:00:00:00 indicates a BCM4330B1 controller
 	 * with waiting for configuration state.
+	 *
+	 * The address 43:43:A0:12:1F:AC indicates a BCM43430A0 controller
+	 * with no configured address.
 	 */
 	if (!bacmp(&bda->bdaddr, BDADDR_BCM20702A0) ||
 	    !bacmp(&bda->bdaddr, BDADDR_BCM20702A1) ||
 	    !bacmp(&bda->bdaddr, BDADDR_BCM4324B3) ||
-	    !bacmp(&bda->bdaddr, BDADDR_BCM4330B1)) {
+	    !bacmp(&bda->bdaddr, BDADDR_BCM4330B1) ||
+	    !bacmp(&bda->bdaddr, BDADDR_BCM43430A0)) {
 		bt_dev_info(hdev, "BCM: Using default device address (%pMR)",
 			    &bda->bdaddr);
 		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
-- 
2.20.0