| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20181218040702.29231-4-andrew.smirnov@gmail.com>
Date: Mon, 17 Dec 2018 20:07:02 -0800
From: Andrey Smirnov <andrew.smirnov@...il.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@....com>
Cc: Andrey Smirnov <andrew.smirnov@...il.com>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Fabio Estevam <fabio.estevam@....com>,
Chris Healy <cphealy@...il.com>,
Lucas Stach <l.stach@...gutronix.de>,
Leonard Crestez <leonard.crestez@....com>,
"A.s. Dong" <aisheng.dong@....com>,
Richard Zhu <hongxing.zhu@....com>,
Rob Herring <robh@...nel.org>, devicetree@...r.kernel.org,
linux-imx@....com, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org
Subject: [PATCH v3 3/3] PCI: imx6: Add support for i.MX8MQ
Add code needed to support i.MX8MQ variant.
Signed-off-by: Andrey Smirnov <andrew.smirnov@...il.com>
Reviewed-by: Lucas Stach <l.stach@...gutronix.de>
Cc: Bjorn Helgaas <bhelgaas@...gle.com>
Cc: Fabio Estevam <fabio.estevam@....com>
Cc: Chris Healy <cphealy@...il.com>
Cc: Lucas Stach <l.stach@...gutronix.de>
Cc: Leonard Crestez <leonard.crestez@....com>
Cc: "A.s. Dong" <aisheng.dong@....com>
Cc: Richard Zhu <hongxing.zhu@....com>
Cc: Rob Herring <robh@...nel.org>
Cc: devicetree@...r.kernel.org
Cc: linux-imx@....com
Cc: linux-arm-kernel@...ts.infradead.org
Cc: linux-kernel@...r.kernel.org
Cc: linux-pci@...r.kernel.org
---
.../bindings/pci/fsl,imx6q-pcie.txt | 6 +-
drivers/pci/controller/dwc/Kconfig | 4 +-
drivers/pci/controller/dwc/pci-imx6.c | 82 ++++++++++++++++++-
3 files changed, 87 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
index d514c1f2365f..1a10c313e8d7 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
@@ -9,6 +9,7 @@ Required properties:
- "fsl,imx6sx-pcie",
- "fsl,imx6qp-pcie"
- "fsl,imx7d-pcie"
+ - "fsl,imx8mq-pcie"
- reg: base address and length of the PCIe controller
- interrupts: A list of interrupt outputs of the controller. Must contain an
entry for each entry in the interrupt-names property.
@@ -45,7 +46,7 @@ Additional required properties for imx6sx-pcie:
PCIE_PHY power domains
- power-domain-names: Must be "pcie", "pcie_phy"
-Additional required properties for imx7d-pcie:
+Additional required properties for imx7d-pcie and imx8mq-pcie:
- power-domains: Must be set to a phandle pointing to PCIE_PHY power domain
- resets: Must contain phandles to PCIe-related reset lines exposed by SRC
IP block
@@ -54,6 +55,9 @@ Additional required properties for imx7d-pcie:
- "apps"
- "turnoff"
+Additional required properties for imx8mq-pcie:
+- fsl,controller-id: Logical ID of a given PCIE controller. PCIE1 is 0, PCIE2 is 1;
+
Example:
pcie@...00000 {
diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index 6aafec3fad00..83ea318ad989 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -89,8 +89,8 @@ config PCI_EXYNOS
select PCIE_DW_HOST
config PCI_IMX6
- bool "Freescale i.MX6/7 PCIe controller"
- depends on SOC_IMX6Q || SOC_IMX7D || (ARM && COMPILE_TEST)
+ bool "Freescale i.MX6/7/8 PCIe controller"
+ depends on SOC_IMX6Q || SOC_IMX7D || (ARM64 && ARCH_MXC) || ((ARM || ARM64) && COMPILE_TEST)
depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW_HOST
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index caa05104b90b..d71680920155 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -8,6 +8,7 @@
* Author: Sean Cross <xobs@...agi.com>
*/
+#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/gpio.h>
@@ -32,6 +33,11 @@
#include "pcie-designware.h"
+#define IMX8MQ_GPR_PCIE_REF_USE_PAD BIT(9)
+#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN BIT(10)
+#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE BIT(11)
+#define IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE GENMASK(11, 8)
+
#define to_imx6_pcie(x) dev_get_drvdata((x)->dev)
enum imx6_pcie_variants {
@@ -39,6 +45,7 @@ enum imx6_pcie_variants {
IMX6SX,
IMX6QP,
IMX7D,
+ IMX8MQ,
};
#define IMX6_PCIE_FLAG_IMX6_PHY BIT(0)
@@ -57,6 +64,7 @@ struct imx6_pcie {
struct clk *pcie_inbound_axi;
struct clk *pcie;
struct regmap *iomuxc_gpr;
+ u32 controller_id;
struct reset_control *pciephy_reset;
struct reset_control *apps_reset;
struct reset_control *turnoff_reset;
@@ -275,6 +283,7 @@ static void imx6_pcie_reset_phy(struct imx6_pcie *imx6_pcie)
pcie_phy_write(imx6_pcie, PHY_RX_OVRD_IN_LO, tmp);
}
+#ifdef CONFIG_ARM
/* Added for PCI abort handling */
static int imx6q_pcie_abort_handler(unsigned long addr,
unsigned int fsr, struct pt_regs *regs)
@@ -308,6 +317,7 @@ static int imx6q_pcie_abort_handler(unsigned long addr,
return 1;
}
+#endif
static int imx6_pcie_attach_pd(struct device *dev)
{
@@ -352,6 +362,7 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
switch (imx6_pcie->drvdata->variant) {
case IMX7D:
+ case IMX8MQ:
reset_control_assert(imx6_pcie->pciephy_reset);
reset_control_assert(imx6_pcie->apps_reset);
break;
@@ -390,6 +401,7 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
{
struct dw_pcie *pci = imx6_pcie->pci;
struct device *dev = pci->dev;
+ unsigned int offset;
int ret = 0;
switch (imx6_pcie->drvdata->variant) {
@@ -420,6 +432,29 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
break;
case IMX7D:
break;
+ case IMX8MQ:
+ switch (imx6_pcie->controller_id) {
+ case 0:
+ offset = IOMUXC_GPR14;
+ break;
+ case 1:
+ offset = IOMUXC_GPR16;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /*
+ * Set the over ride low and enabled
+ * make sure that REF_CLK is turned on.
+ */
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, offset,
+ IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE,
+ 0);
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, offset,
+ IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN,
+ IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN);
+ break;
}
return ret;
@@ -496,6 +531,9 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
}
switch (imx6_pcie->drvdata->variant) {
+ case IMX8MQ:
+ reset_control_deassert(imx6_pcie->pciephy_reset);
+ break;
case IMX7D:
reset_control_deassert(imx6_pcie->pciephy_reset);
imx7d_pcie_wait_for_phy_pll_lock(imx6_pcie);
@@ -533,7 +571,36 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
{
+
+
+ unsigned int mask, val, offset;
+
+ mask = IMX6Q_GPR12_DEVICE_TYPE;
+ val = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE, PCI_EXP_TYPE_ROOT_PORT);
+
switch (imx6_pcie->drvdata->variant) {
+ case IMX8MQ:
+ switch (imx6_pcie->controller_id) {
+ case 0:
+ offset = IOMUXC_GPR14;
+ break;
+ case 1:
+ offset = IOMUXC_GPR16;
+ mask = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE;
+ val = FIELD_PREP(IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
+ PCI_EXP_TYPE_ROOT_PORT);
+ break;
+ default:
+ return;
+ }
+ /*
+ * TODO: Currently this code assumes external
+ * oscillator is being used
+ */
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, offset,
+ IMX8MQ_GPR_PCIE_REF_USE_PAD,
+ IMX8MQ_GPR_PCIE_REF_USE_PAD);
+ break;
case IMX7D:
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
@@ -569,8 +636,7 @@ static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
break;
}
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
- IMX6Q_GPR12_DEVICE_TYPE, PCI_EXP_TYPE_ROOT_PORT << 12);
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, mask, val);
}
static int imx6_setup_phy_mpll(struct imx6_pcie *imx6_pcie)
@@ -667,6 +733,7 @@ static void imx6_pcie_ltssm_enable(struct device *dev)
IMX6Q_GPR12_PCIE_CTL_2);
break;
case IMX7D:
+ case IMX8MQ:
reset_control_deassert(imx6_pcie->apps_reset);
break;
}
@@ -954,6 +1021,10 @@ static int imx6_pcie_probe(struct platform_device *pdev)
imx6_pcie->pci = pci;
imx6_pcie->drvdata = of_device_get_match_data(dev);
+ if (of_property_read_u32(node, "fsl,controller-id",
+ &imx6_pcie->controller_id))
+ imx6_pcie->controller_id = 0;
+
dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
pci->dbi_base = devm_ioremap_resource(dev, dbi_base);
if (IS_ERR(pci->dbi_base))
@@ -1006,6 +1077,7 @@ static int imx6_pcie_probe(struct platform_device *pdev)
}
break;
case IMX7D:
+ case IMX8MQ:
imx6_pcie->pciephy_reset = devm_reset_control_get_exclusive(dev,
"pciephy");
if (IS_ERR(imx6_pcie->pciephy_reset)) {
@@ -1110,6 +1182,9 @@ static const struct imx6_pcie_drvdata drvdata[] = {
[IMX7D] = {
.variant = IMX7D,
},
+ [IMX8MQ] = {
+ .variant = IMX8MQ,
+ },
};
static const struct of_device_id imx6_pcie_of_match[] = {
@@ -1117,6 +1192,7 @@ static const struct of_device_id imx6_pcie_of_match[] = {
{ .compatible = "fsl,imx6sx-pcie", .data = &drvdata[IMX6SX], },
{ .compatible = "fsl,imx6qp-pcie", .data = &drvdata[IMX6QP], },
{ .compatible = "fsl,imx7d-pcie", .data = &drvdata[IMX7D], },
+ { .compatible = "fsl,imx8mq-pcie", .data = &drvdata[IMX8MQ], },
{},
};
@@ -1133,6 +1209,7 @@ static struct platform_driver imx6_pcie_driver = {
static int __init imx6_pcie_init(void)
{
+#ifdef CONFIG_ARM
/*
* Since probe() can be deferred we need to make sure that
* hook_fault_code is not called after __init memory is freed
@@ -1142,6 +1219,7 @@ static int __init imx6_pcie_init(void)
*/
hook_fault_code(8, imx6q_pcie_abort_handler, SIGBUS, 0,
"external abort on non-linefetch");
+#endif
return platform_driver_register(&imx6_pcie_driver);
}
--
2.19.1
Powered by blists - more mailing lists