| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20181218114003.10002-1-ernest.zhang@bayhubtech.com>
Date: Tue, 18 Dec 2018 11:40:29 +0000
From: "Ernest Zhang(WH)" <ernest.zhang@...hubtech.com>
To: Adrian Hunter <adrian.hunter@...el.com>,
Ulf Hansson <ulf.hansson@...aro.org>,
"linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC: "Andy Dai (WH)" <andy.dai@...hubtech.com>,
"Xiaoguang Yu (WH)" <xiaoguang.yu@...hubtech.com>,
"Shirley Her (SC)" <shirley.her@...hubtech.com>,
"Mike Li (WH)" <mike.li@...hubtech.com>,
"Ernest Zhang(WH)" <ernest.zhang@...hubtech.com>
Subject: [PATCH V2 1/2] mmc: sdhci: Fix O2 Host PLL and card detect issue
From: "Ernest Zhang" <ernest.zhang@...hubtech.com>
1. O2 Host Controller PLL lock status is not in compliance with
CLOCK_CONTROL register bit 1
2. O2 Host Controller card detect function only work when PLL is
enabled and locked
Signed-off-by: Ernest Zhang <ernest.zhang@...hubtech.com>
---
Change in V2:
1. Remove unused sdhci_ops function pointer
2. Change kind of timeout check, get the time first
3. Rename CARD PRESENT register bit16 and bit 18 macro
Change in V1:
N/A
---
drivers/mmc/host/sdhci-pci-core.c | 9 +++
drivers/mmc/host/sdhci-pci-o2micro.c | 121 ++++++++++++++++++++++++++++++++++-
drivers/mmc/host/sdhci-pci.h | 1 +
drivers/mmc/host/sdhci.h | 4 ++
4 files changed, 132 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index 2a6eba74b94e..fc4f35653602 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -1257,6 +1257,14 @@ static int jmicron_resume(struct sdhci_pci_chip *chip)
}
#endif
+static const struct sdhci_ops sdhci_pci_o2_ops = {
+ .set_clock = sdhci_pci_o2_set_clock,
+ .enable_dma = sdhci_pci_enable_dma,
+ .set_bus_width = sdhci_set_bus_width,
+ .reset = sdhci_reset,
+ .set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
static const struct sdhci_pci_fixes sdhci_o2 = {
.probe = sdhci_pci_o2_probe,
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
@@ -1265,6 +1273,7 @@ static const struct sdhci_pci_fixes sdhci_o2 = {
#ifdef CONFIG_PM_SLEEP
.resume = sdhci_pci_o2_resume,
#endif
+ .ops = &sdhci_pci_o2_ops,
};
static const struct sdhci_pci_fixes sdhci_jmicron = {
diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
index cc3ffeffd7a2..506b93e5dcd8 100644
--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -60,6 +60,13 @@
#define O2_SD_VENDOR_SETTING2 0x1C8
#define O2_SD_HW_TUNING_DISABLE BIT(4)
+#define O2_PLL_WDT_CONTROL1 0x1CC
+#define O2_PLL_FORCE_ACTIVE BIT(18)
+#define O2_PLL_LOCK_STATUS BIT(14)
+#define O2_PLL_SOFT_RESET BIT(12)
+
+#define O2_SD_DETECT_SETTING 0x324
+
static void sdhci_o2_set_tuning_mode(struct sdhci_host *host)
{
u16 reg;
@@ -283,6 +290,113 @@ static void sdhci_pci_o2_enable_msi(struct sdhci_pci_chip *chip,
host->irq = pci_irq_vector(chip->pdev, 0);
}
+static void sdhci_o2_wait_card_detect_stable(struct sdhci_host *host)
+{
+ ktime_t timeout;
+ u32 scratch32;
+
+ /* Wait max 50 ms */
+ timeout = ktime_add_ms(ktime_get(), 50);
+ while (1) {
+ bool timedout = ktime_after(ktime_get(), timeout);
+
+ scratch32 = sdhci_readl(host, SDHCI_PRESENT_STATE);
+ if ((scratch32 & SDHCI_CARD_PRESENT) >> SDHCI_CARD_PRES_SHIFT
+ == (scratch32 & SDHCI_CD_LVL) >> SDHCI_CD_LVL_SHIFT)
+ break;
+
+ if (timedout) {
+ pr_err("%s: Card Detect debounce never finished.\n",
+ mmc_hostname(host->mmc));
+ sdhci_dumpregs(host);
+ return;
+ }
+ udelay(10);
+ }
+}
+
+static void sdhci_o2_enable_internal_clock(struct sdhci_host *host)
+{
+ ktime_t timeout;
+ u16 scratch;
+ u32 scratch32;
+
+ /* PLL software reset */
+ scratch32 = sdhci_readl(host, O2_PLL_WDT_CONTROL1);
+ scratch32 |= O2_PLL_SOFT_RESET;
+ sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
+ udelay(1);
+ scratch32 &= ~(O2_PLL_SOFT_RESET);
+ sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
+
+ /* PLL force active */
+ scratch32 |= O2_PLL_FORCE_ACTIVE;
+ sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
+
+ /* Wait max 20 ms */
+ timeout = ktime_add_ms(ktime_get(), 20);
+ while (1) {
+ bool timedout = ktime_after(ktime_get(), timeout);
+
+ scratch = sdhci_readw(host, O2_PLL_WDT_CONTROL1);
+ if (scratch & O2_PLL_LOCK_STATUS)
+ break;
+ if (timedout) {
+ pr_err("%s: Internal clock never stabilised.\n",
+ mmc_hostname(host->mmc));
+ sdhci_dumpregs(host);
+ goto out;
+ }
+ udelay(10);
+ }
+
+ /* Wait for card detect finish */
+ udelay(1);
+ sdhci_o2_wait_card_detect_stable(host);
+
+out:
+ /* Cancel PLL force active */
+ scratch32 = sdhci_readl(host, O2_PLL_WDT_CONTROL1);
+ scratch32 &= ~O2_PLL_FORCE_ACTIVE;
+ sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
+}
+
+static int sdhci_o2_get_cd(struct mmc_host *mmc)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+
+ sdhci_o2_enable_internal_clock(host);
+
+ return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT);
+}
+
+static void sdhci_o2_enable_clk(struct sdhci_host *host, u16 clk)
+{
+ /* Enable internal clock */
+ clk |= SDHCI_CLOCK_INT_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ if (sdhci_o2_get_cd(host->mmc)) {
+ clk |= SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+ }
+}
+
+void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+ u16 clk;
+
+ host->mmc->actual_clock = 0;
+
+ sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
+
+ if (clock == 0)
+ return;
+
+ clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
+ sdhci_o2_enable_clk(host, clk);
+}
+
int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
{
struct sdhci_pci_chip *chip;
@@ -316,7 +430,11 @@ int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
host->flags |= SDHCI_SIGNALING_180;
host->mmc->caps2 |= MMC_CAP2_NO_SD;
host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
+ pci_write_config_dword(chip->pdev,
+ O2_SD_DETECT_SETTING, 3);
}
+
+ slot->host->mmc_host_ops.get_cd = sdhci_o2_get_cd;
}
host->mmc_host_ops.execute_tuning = sdhci_o2_execute_tuning;
@@ -490,9 +608,6 @@ int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
break;
case PCI_DEVICE_ID_O2_SEABIRD0:
- if (chip->pdev->revision == 0x01)
- chip->quirks |= SDHCI_QUIRK_DELAY_AFTER_POWER;
- /* fall through */
case PCI_DEVICE_ID_O2_SEABIRD1:
/* UnLock WP */
ret = pci_read_config_byte(chip->pdev,
diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h
index 2ef0bdca9197..e41a85f0b40a 100644
--- a/drivers/mmc/host/sdhci-pci.h
+++ b/drivers/mmc/host/sdhci-pci.h
@@ -184,6 +184,7 @@ int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip);
#ifdef CONFIG_PM_SLEEP
int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip);
#endif
+void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock);
extern const struct sdhci_pci_fixes sdhci_arasan;
extern const struct sdhci_pci_fixes sdhci_snps;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 6cc9a3c2ac66..924e03332cf7 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -73,6 +73,10 @@
#define SDHCI_SPACE_AVAILABLE 0x00000400
#define SDHCI_DATA_AVAILABLE 0x00000800
#define SDHCI_CARD_PRESENT 0x00010000
+#define SDHCI_CARD_PRES_SHIFT 16
+#define SDHCI_CD_STABLE 0x00020000
+#define SDHCI_CD_LVL 0x00040000
+#define SDHCI_CD_LVL_SHIFT 18
#define SDHCI_WRITE_PROTECT 0x00080000
#define SDHCI_DATA_LVL_MASK 0x00F00000
#define SDHCI_DATA_LVL_SHIFT 20
--
2.16.4
Powered by blists - more mailing lists