| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20181218115931.GA21253@localhost.localdomain>
Date: Tue, 18 Dec 2018 13:59:31 +0200
From: Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
To: mazziesaccount@...il.com, matti.vaittinen@...rohmeurope.com
Cc: heikki.haikola@...rohmeurope.com, mikko.mutanen@...rohmeurope.com,
broonie@...nel.org, gregkh@...uxfoundation.org, rafael@...nel.org,
linus.walleij@...aro.org, linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org, vladimir_zapolskiy@...tor.com
Subject: [PATCH v3] regmap: regmap-irq/gpio-max77620: add level-irq support
Add level active IRQ support to regmap-irq irqchip. Change breaks
existing regmap-irq type setting. Convert the existing drivers which
use regmap-irq with trigger type setting (gpio-max77620) to work
with this new approach. So we do not magically support level-active
IRQs on gpio-max77620 - but add support to the regmap-irq for chips
which support them =)
We do not support distinguishing situation where HW supports rising
and falling edge detection but not both. Separating this would require
inventing yet another flags for IRQ types.
Signed-off-by: Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
---
Version 3 of this patch is intended to be functionally identical to v2.
This patch is rebased on top of a tree which contains changes:
"regmap: irq: handle HW using separate rising/falling edge interrupts"
from Bartosz Golaszewski and the change
"regmap: regmap-irq: Remove default irq type setting from core"
(proposed here):
https://lore.kernel.org/lkml/20181218105813.GA6957@localhost.localdomain/
There should not be direct dependency to "regmap: regmap-irq: Remove
default irq type setting from core" though. Patch was also tested to
apply cleany on regmap-tree.
Same statement regarding testing applies - gpio-max77620 are only
tested to compile. All real testing would be _HIGHLY_ appreciated.
drivers/base/regmap/regmap-irq.c | 35 ++++++++++-----
drivers/gpio/gpio-max77620.c | 96 ++++++++++++++++++++++++++--------------
include/linux/regmap.h | 27 ++++++++---
3 files changed, 110 insertions(+), 48 deletions(-)
diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c
index 8b216b2e2c19..31d23c9a5ae7 100644
--- a/drivers/base/regmap/regmap-irq.c
+++ b/drivers/base/regmap/regmap-irq.c
@@ -199,7 +199,7 @@ static void regmap_irq_enable(struct irq_data *data)
const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq);
unsigned int mask, type;
- type = irq_data->type_falling_mask | irq_data->type_rising_mask;
+ type = irq_data->type.type_falling_val | irq_data->type.type_rising_val;
/*
* The type_in_mask flag means that the underlying hardware uses
@@ -234,27 +234,42 @@ static int regmap_irq_set_type(struct irq_data *data, unsigned int type)
struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
struct regmap *map = d->map;
const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq);
- int reg = irq_data->type_reg_offset / map->reg_stride;
+ int reg;
+ const struct regmap_irq_type *t = &irq_data->type;
- if (!(irq_data->type_rising_mask | irq_data->type_falling_mask))
- return 0;
+ if ((t->types_supported & type) != type)
+ return -ENOTSUPP;
+
+ reg = t->type_reg_offset / map->reg_stride;
- d->type_buf[reg] &= ~(irq_data->type_falling_mask |
- irq_data->type_rising_mask);
+ if (t->type_reg_mask)
+ d->type_buf[reg] &= ~t->type_reg_mask;
+ else
+ d->type_buf[reg] &= ~(t->type_falling_val |
+ t->type_rising_val |
+ t->type_level_low_val |
+ t->type_level_high_val);
switch (type) {
case IRQ_TYPE_EDGE_FALLING:
- d->type_buf[reg] |= irq_data->type_falling_mask;
+ d->type_buf[reg] |= t->type_falling_val;
break;
case IRQ_TYPE_EDGE_RISING:
- d->type_buf[reg] |= irq_data->type_rising_mask;
+ d->type_buf[reg] |= t->type_rising_val;
break;
case IRQ_TYPE_EDGE_BOTH:
- d->type_buf[reg] |= (irq_data->type_falling_mask |
- irq_data->type_rising_mask);
+ d->type_buf[reg] |= (t->type_falling_val |
+ t->type_rising_val);
break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ d->type_buf[reg] |= t->type_level_high_val;
+ break;
+
+ case IRQ_TYPE_LEVEL_LOW:
+ d->type_buf[reg] |= t->type_level_low_val;
+ break;
default:
return -EINVAL;
}
diff --git a/drivers/gpio/gpio-max77620.c b/drivers/gpio/gpio-max77620.c
index 538bce4b5b42..65fa3a198ebd 100644
--- a/drivers/gpio/gpio-max77620.c
+++ b/drivers/gpio/gpio-max77620.c
@@ -25,60 +25,92 @@ struct max77620_gpio {
static const struct regmap_irq max77620_gpio_irqs[] = {
[0] = {
- .mask = MAX77620_IRQ_LVL2_GPIO_EDGE0,
- .type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING,
- .type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING,
.reg_offset = 0,
- .type_reg_offset = 0,
+ .mask = MAX77620_IRQ_LVL2_GPIO_EDGE0,
+ .type = {
+ .type_rising_val = MAX77620_CNFG_GPIO_INT_RISING,
+ .type_falling_val = MAX77620_CNFG_GPIO_INT_FALLING,
+ .type_reg_mask = MAX77620_CNFG_GPIO_INT_MASK,
+ .type_reg_offset = 0,
+ .types_supported = IRQ_TYPE_EDGE_BOTH,
+ },
},
[1] = {
- .mask = MAX77620_IRQ_LVL2_GPIO_EDGE1,
- .type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING,
- .type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING,
.reg_offset = 0,
- .type_reg_offset = 1,
+ .mask = MAX77620_IRQ_LVL2_GPIO_EDGE1,
+ .type = {
+ .type_rising_val = MAX77620_CNFG_GPIO_INT_RISING,
+ .type_falling_val = MAX77620_CNFG_GPIO_INT_FALLING,
+ .type_reg_mask = MAX77620_CNFG_GPIO_INT_MASK,
+ .type_reg_offset = 1,
+ .types_supported = IRQ_TYPE_EDGE_BOTH,
+ },
},
[2] = {
- .mask = MAX77620_IRQ_LVL2_GPIO_EDGE2,
- .type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING,
- .type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING,
.reg_offset = 0,
- .type_reg_offset = 2,
+ .mask = MAX77620_IRQ_LVL2_GPIO_EDGE2,
+ .type = {
+ .type_rising_val = MAX77620_CNFG_GPIO_INT_RISING,
+ .type_falling_val = MAX77620_CNFG_GPIO_INT_FALLING,
+ .type_reg_mask = MAX77620_CNFG_GPIO_INT_MASK,
+ .type_reg_offset = 2,
+ .types_supported = IRQ_TYPE_EDGE_BOTH,
+ },
},
[3] = {
- .mask = MAX77620_IRQ_LVL2_GPIO_EDGE3,
- .type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING,
- .type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING,
.reg_offset = 0,
- .type_reg_offset = 3,
+ .mask = MAX77620_IRQ_LVL2_GPIO_EDGE3,
+ .type = {
+ .type_rising_val = MAX77620_CNFG_GPIO_INT_RISING,
+ .type_falling_val = MAX77620_CNFG_GPIO_INT_FALLING,
+ .type_reg_mask = MAX77620_CNFG_GPIO_INT_MASK,
+ .type_reg_offset = 3,
+ .types_supported = IRQ_TYPE_EDGE_BOTH,
+ },
},
[4] = {
- .mask = MAX77620_IRQ_LVL2_GPIO_EDGE4,
- .type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING,
- .type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING,
.reg_offset = 0,
- .type_reg_offset = 4,
+ .mask = MAX77620_IRQ_LVL2_GPIO_EDGE4,
+ .type = {
+ .type_rising_val = MAX77620_CNFG_GPIO_INT_RISING,
+ .type_falling_val = MAX77620_CNFG_GPIO_INT_FALLING,
+ .type_reg_mask = MAX77620_CNFG_GPIO_INT_MASK,
+ .type_reg_offset = 4,
+ .types_supported = IRQ_TYPE_EDGE_BOTH,
+ },
},
[5] = {
- .mask = MAX77620_IRQ_LVL2_GPIO_EDGE5,
- .type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING,
- .type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING,
.reg_offset = 0,
- .type_reg_offset = 5,
+ .mask = MAX77620_IRQ_LVL2_GPIO_EDGE5,
+ .type = {
+ .type_rising_val = MAX77620_CNFG_GPIO_INT_RISING,
+ .type_falling_val = MAX77620_CNFG_GPIO_INT_FALLING,
+ .type_reg_mask = MAX77620_CNFG_GPIO_INT_MASK,
+ .type_reg_offset = 5,
+ .types_supported = IRQ_TYPE_EDGE_BOTH,
+ },
},
[6] = {
- .mask = MAX77620_IRQ_LVL2_GPIO_EDGE6,
- .type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING,
- .type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING,
.reg_offset = 0,
- .type_reg_offset = 6,
+ .mask = MAX77620_IRQ_LVL2_GPIO_EDGE6,
+ .type = {
+ .type_rising_val = MAX77620_CNFG_GPIO_INT_RISING,
+ .type_falling_val = MAX77620_CNFG_GPIO_INT_FALLING,
+ .type_reg_mask = MAX77620_CNFG_GPIO_INT_MASK,
+ .type_reg_offset = 6,
+ .types_supported = IRQ_TYPE_EDGE_BOTH,
+ },
},
[7] = {
- .mask = MAX77620_IRQ_LVL2_GPIO_EDGE7,
- .type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING,
- .type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING,
.reg_offset = 0,
- .type_reg_offset = 7,
+ .mask = MAX77620_IRQ_LVL2_GPIO_EDGE7,
+ .type = {
+ .type_rising_val = MAX77620_CNFG_GPIO_INT_RISING,
+ .type_falling_val = MAX77620_CNFG_GPIO_INT_FALLING,
+ .type_reg_mask = MAX77620_CNFG_GPIO_INT_MASK,
+ .type_reg_offset = 7,
+ .types_supported = IRQ_TYPE_EDGE_BOTH,
+ },
},
};
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index b7aa50cfb306..a904f87151e8 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -1089,22 +1089,37 @@ int regmap_fields_read(struct regmap_field *field, unsigned int id,
int regmap_fields_update_bits_base(struct regmap_field *field, unsigned int id,
unsigned int mask, unsigned int val,
bool *change, bool async, bool force);
+/**
+ * struct regmap_irq_type - IRQ type definitions.
+ *
+ * @type_reg_offset: Offset register for the irq type setting.
+ * @type_rising_val: Register value to configure RISING type irq.
+ * @type_falling_val: Register value to configure FALLING type irq.
+ * @type_level_low_val: Register value to configure LEVEL_LOW type irq.
+ * @type_level_high_val: Register value to configure LEVEL_HIGH type irq.
+ * @types_supported: logical OR of IRQ_TYPE_* flags indicating supported types.
+ */
+struct regmap_irq_type {
+ unsigned int type_reg_offset;
+ unsigned int type_reg_mask;
+ unsigned int type_rising_val;
+ unsigned int type_falling_val;
+ unsigned int type_level_low_val;
+ unsigned int type_level_high_val;
+ unsigned int types_supported;
+};
/**
* struct regmap_irq - Description of an IRQ for the generic regmap irq_chip.
*
* @reg_offset: Offset of the status/mask register within the bank
* @mask: Mask used to flag/control the register.
- * @type_reg_offset: Offset register for the irq type setting.
- * @type_rising_mask: Mask bit to configure RISING type irq.
- * @type_falling_mask: Mask bit to configure FALLING type irq.
+ * @type: IRQ trigger type setting details if supported.
*/
struct regmap_irq {
unsigned int reg_offset;
unsigned int mask;
- unsigned int type_reg_offset;
- unsigned int type_rising_mask;
- unsigned int type_falling_mask;
+ struct regmap_irq_type type;
};
#define REGMAP_IRQ_REG(_irq, _off, _mask) \
--
2.14.3
--
Matti Vaittinen
ROHM Semiconductors
~~~ "I don't think so," said Rene Descartes. Just then, he vanished ~~~
Powered by blists - more mailing lists