[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20181218150238.23010-1-manivannan.sadhasivam@linaro.org>
Date: Tue, 18 Dec 2018 20:32:27 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: olof@...om.net, arnd@...db.de, arm@...nel.org,
linux-arm-kernel@...ts.infradead.org
Cc: robh+dt@...nel.org, gregkh@...uxfoundation.org, jslaby@...e.com,
linux-unisoc@...ts.infradead.org, afaerber@...e.de,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-serial@...r.kernel.org, amit.kucheria@...aro.org,
linus.walleij@...aro.org, zhao_steven@....net,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Subject: [PATCH v7 00/11] Add initial RDA8810PL SoC and Orange Pi boards support
Hello Maintainers,
This patch series adds initial RDA8810PL SoC and Orange Pi boards (2G IoT and
i96) support. RDA8810PL is an ARM Cortex A5 based SoC with Vivante's GC860
GPU. The SoC has been added as a new ARM sub architecture with myself as the
maintainer.
More information about the boards can be found in below links:
1. Orange Pi 2G-IoT - http://www.orangepi.org/OrangePi2GIOT/
2. Orange Pi i96 - https://www.96boards.org/product/orangepi-i96/
All patches are reviewed by the corresponding subsystem maintainers. The
clocksource and irqchip patches are reviewed and merged while the serial
driver got review from Greg but I'm not sure who will apply it.
So as per my discussion with Arnd, sending the individual patches instead
of a Pull request so that the rest of the patches can go through the
ARM SoC tree.
Please consider applying it.
Thanks,
Mani
Andreas Färber (4):
dt-bindings: Add RDA Micro vendor prefix
dt-bindings: arm: Document RDA8810PL and reference boards
ARM: Prepare RDA8810PL SoC
dt-bindings: serial: Document RDA Micro UART
Manivannan Sadhasivam (7):
ARM: dts: Add devicetree for RDA8810PL SoC
ARM: dts: Add devicetree for OrangePi 2G IoT board
ARM: dts: Add devicetree for OrangePi i96 board
ARM: dts: rda8810pl: Add timer support
ARM: dts: rda8810pl: Add interrupt support for UART
tty: serial: Add RDA8810PL UART driver
MAINTAINERS: Add entry for RDA Micro SoC architecture
.../admin-guide/kernel-parameters.txt | 6 +
Documentation/devicetree/bindings/arm/rda.txt | 17 +
.../bindings/serial/rda,8810pl-uart.txt | 17 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
MAINTAINERS | 14 +
arch/arm/Kconfig | 2 +
arch/arm/Makefile | 1 +
arch/arm/boot/dts/Makefile | 3 +
.../boot/dts/rda8810pl-orangepi-2g-iot.dts | 50 ++
arch/arm/boot/dts/rda8810pl-orangepi-i96.dts | 50 ++
arch/arm/boot/dts/rda8810pl.dtsi | 99 +++
arch/arm/mach-rda/Kconfig | 7 +
arch/arm/mach-rda/Makefile | 1 +
drivers/tty/serial/Kconfig | 19 +
drivers/tty/serial/Makefile | 1 +
drivers/tty/serial/rda-uart.c | 831 ++++++++++++++++++
include/uapi/linux/serial_core.h | 3 +
17 files changed, 1122 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/rda.txt
create mode 100644 Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt
create mode 100644 arch/arm/boot/dts/rda8810pl-orangepi-2g-iot.dts
create mode 100644 arch/arm/boot/dts/rda8810pl-orangepi-i96.dts
create mode 100644 arch/arm/boot/dts/rda8810pl.dtsi
create mode 100644 arch/arm/mach-rda/Kconfig
create mode 100644 arch/arm/mach-rda/Makefile
create mode 100644 drivers/tty/serial/rda-uart.c
--
2.17.1
Powered by blists - more mailing lists