| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAPDyKFr+TYXCEDtsdXQ5tLNqDv1yx2zPh+yiURmq_wji9q4cAg@mail.gmail.com>
Date: Wed, 19 Dec 2018 10:18:06 +0100
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Jjian Zhou <jjian.zhou@...iatek.com>
Cc: Matthias Brugger <matthias.bgg@...il.com>,
Chaotian Jing <chaotian.jing@...iatek.com>,
Ryder Lee <ryder.lee@...iatek.com>,
Sean Wang <sean.wang@...iatek.com>,
"linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
Linux ARM <linux-arm-kernel@...ts.infradead.org>,
linux-mediatek@...ts.infradead.org,
srv_heupstream <srv_heupstream@...iatek.com>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Yong Mao <yong.mao@...iatek.com>
Subject: Re: [v4] mmc: mediatek: Add MMC_CAP_SDIO_IRQ support
On Tue, 18 Dec 2018 at 13:33, Jjian Zhou <jjian.zhou@...iatek.com> wrote:
>
> From: jjian zhou <jjian.zhou@...iatek.com>
>
> This patch enables support SDIO IRQs. It enables
> MMC_CAP_SDIO_IRQ & MMC_CAP2_SDIO_IRQ_NOTHREAD
> and implement the ->ack_sdio_irq callback.
>
> Signed-off-by: Jjian Zhou <jjian.zhou@...iatek.com>
> Signed-off-by: Chaotian Jing <chaotian.jing@...iatek.com>
> Signed-off-by: Yong Mao <yong.mao@...iatek.com>
Applied for next, thanks!
Kind regards
Uffe
> ---
> drivers/mmc/host/mtk-sd.c | 53 ++++++++++++++++++++++++++++++++++++++++++++---
> 1 file changed, 50 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index 6334cc7..8afeaf8 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -1114,6 +1114,7 @@ static void msdc_start_command(struct msdc_host *host,
> struct mmc_request *mrq, struct mmc_command *cmd)
> {
> u32 rawcmd;
> + unsigned long flags;
>
> WARN_ON(host->cmd);
> host->cmd = cmd;
> @@ -1131,7 +1132,10 @@ static void msdc_start_command(struct msdc_host *host,
> cmd->error = 0;
> rawcmd = msdc_cmd_prepare_raw_cmd(host, mrq, cmd);
>
> + spin_lock_irqsave(&host->lock, flags);
> sdr_set_bits(host->base + MSDC_INTEN, cmd_ints_mask);
> + spin_unlock_irqrestore(&host->lock, flags);
> +
> writel(cmd->arg, host->base + SDC_ARG);
> writel(rawcmd, host->base + SDC_CMD);
> }
> @@ -1351,6 +1355,31 @@ static void msdc_request_timeout(struct work_struct *work)
> }
> }
>
> +static void __msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
> +{
> + unsigned long flags;
> + struct msdc_host *host = mmc_priv(mmc);
> +
> + spin_lock_irqsave(&host->lock, flags);
> + if (enb)
> + sdr_set_bits(host->base + MSDC_INTEN, MSDC_INTEN_SDIOIRQ);
> + else
> + sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INTEN_SDIOIRQ);
> + spin_unlock_irqrestore(&host->lock, flags);
> +}
> +
> +static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
> +{
> + struct msdc_host *host = mmc_priv(mmc);
> +
> + __msdc_enable_sdio_irq(mmc, enb);
> +
> + if (enb)
> + pm_runtime_get_noresume(host->dev);
> + else
> + pm_runtime_put_noidle(host->dev);
> +}
> +
> static irqreturn_t msdc_irq(int irq, void *dev_id)
> {
> struct msdc_host *host = (struct msdc_host *) dev_id;
> @@ -1373,7 +1402,12 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
> data = host->data;
> spin_unlock_irqrestore(&host->lock, flags);
>
> - if (!(events & event_mask))
> + if ((events & event_mask) & MSDC_INT_SDIOIRQ) {
> + __msdc_enable_sdio_irq(host->mmc, 0);
> + sdio_signal_irq(host->mmc);
> + }
> +
> + if (!(events & (event_mask & ~MSDC_INT_SDIOIRQ)))
> break;
>
> if (!mrq) {
> @@ -1493,8 +1527,11 @@ static void msdc_init_hw(struct msdc_host *host)
> */
> sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIO);
>
> - /* disable detect SDIO device interrupt function */
> - sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
> + /* Config SDIO device detect interrupt function */
> + if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
> + sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
> + else
> + sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
>
> /* Configure to default data timeout */
> sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, 3);
> @@ -2013,6 +2050,11 @@ static void msdc_hw_reset(struct mmc_host *mmc)
> sdr_clr_bits(host->base + EMMC_IOCON, 1);
> }
>
> +static void msdc_ack_sdio_irq(struct mmc_host *mmc)
> +{
> + __msdc_enable_sdio_irq(mmc, 1);
> +}
> +
> static const struct mmc_host_ops mt_msdc_ops = {
> .post_req = msdc_post_req,
> .pre_req = msdc_pre_req,
> @@ -2020,6 +2062,8 @@ static void msdc_hw_reset(struct mmc_host *mmc)
> .set_ios = msdc_ops_set_ios,
> .get_ro = mmc_gpio_get_ro,
> .get_cd = mmc_gpio_get_cd,
> + .enable_sdio_irq = msdc_enable_sdio_irq,
> + .ack_sdio_irq = msdc_ack_sdio_irq,
> .start_signal_voltage_switch = msdc_ops_switch_volt,
> .card_busy = msdc_card_busy,
> .execute_tuning = msdc_execute_tuning,
> @@ -2147,6 +2191,9 @@ static int msdc_drv_probe(struct platform_device *pdev)
> else
> mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 4095);
>
> + if (mmc->caps & MMC_CAP_SDIO_IRQ)
> + mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
> +
> mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
> /* MMC core transfer sizes tunable parameters */
> mmc->max_segs = MAX_BD_NUM;
> --
> 1.9.1
>
Powered by blists - more mailing lists