[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20181219164827.20985-10-wsa+renesas@sang-engineering.com>
Date: Wed, 19 Dec 2018 17:48:25 +0100
From: Wolfram Sang <wsa+renesas@...g-engineering.com>
To: linux-i2c@...r.kernel.org
Cc: linux-renesas-soc@...r.kernel.org,
Hans de Goede <hdegoede@...hat.com>,
linux-pm@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Wolfram Sang <wsa+renesas@...g-engineering.com>,
Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 09/10] i2c: s3c2410: use core helper to mark adapter suspended
Rejecting transfers should be handled by the core. Also, this will
ensure proper locking which was forgotten in this open coded version.
Signed-off-by: Wolfram Sang <wsa+renesas@...g-engineering.com>
Tested-by: Marek Szyprowski <m.szyprowski@...sung.com>
---
drivers/i2c/busses/i2c-s3c2410.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 2f2e28d60ef5..53bc021f4a5a 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -104,7 +104,6 @@ enum s3c24xx_i2c_state {
struct s3c24xx_i2c {
wait_queue_head_t wait;
kernel_ulong_t quirks;
- unsigned int suspended:1;
struct i2c_msg *msg;
unsigned int msg_num;
@@ -703,9 +702,6 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
unsigned long timeout;
int ret;
- if (i2c->suspended)
- return -EIO;
-
ret = s3c24xx_i2c_set_master(i2c);
if (ret != 0) {
dev_err(i2c->dev, "cannot get bus (error %d)\n", ret);
@@ -1246,7 +1242,7 @@ static int s3c24xx_i2c_suspend_noirq(struct device *dev)
{
struct s3c24xx_i2c *i2c = dev_get_drvdata(dev);
- i2c->suspended = 1;
+ i2c_mark_adapter_suspended(&i2c->adap);
if (!IS_ERR(i2c->sysreg))
regmap_read(i2c->sysreg, EXYNOS5_SYS_I2C_CFG, &i2c->sys_i2c_cfg);
@@ -1267,7 +1263,7 @@ static int s3c24xx_i2c_resume_noirq(struct device *dev)
return ret;
s3c24xx_i2c_init(i2c);
clk_disable(i2c->clk);
- i2c->suspended = 0;
+ i2c_mark_adapter_resumed(&i2c->adap);
return 0;
}
--
2.11.0
Powered by blists - more mailing lists