Message-ID: <20181220173535-mutt-send-email-mst@kernel.org>
Date:   Thu, 20 Dec 2018 17:36:03 -0500
From:   "Michael S. Tsirkin" <mst@...hat.com>
To:     Bjorn Helgaas <helgaas@...nel.org>
Cc:     linux-kernel@...r.kernel.org, xuyandong <xuyandong2@...wei.com>,
        stable@...r.kernel.org, Yinghai Lu <yinghai@...nel.org>,
        Jesse Barnes <jbarnes@...tuousgeek.org>,
        linux-pci@...r.kernel.org
Subject: Re: [PATCH v2] PCI: avoid bridge feature re-probing on hotplug

On Thu, Dec 20, 2018 at 04:31:58PM -0600, Bjorn Helgaas wrote:
> On Thu, Dec 20, 2018 at 04:26:54PM -0500, Michael S. Tsirkin wrote:
> > On Thu, Dec 20, 2018 at 01:49:50PM -0600, Bjorn Helgaas wrote:
> > > On Mon, Dec 17, 2018 at 07:45:41PM -0500, Michael S. Tsirkin wrote:
> > > > commit 1f82de10d6b1 ("PCI/x86: don't assume prefetchable ranges are 64bit")
> > > > added probing of bridge support for 64 bit memory each time bridge is
> > > > re-enumerated.
> > > > 
> > > > Unfortunately this probing is destructive if any device behind
> > > > the bridge is in use at this time.
> > > > 
> > > > This was observed in the field, see
> > > > https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg01711.html
> > > > and specifically
> > > > https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg02082.html
> > > > 
> > > > There's no real need to re-probe the bridge features as the
> > > > registers in question never change - detect that using
> > > > the memory flag being set (it's always set on the 1st pass since
> > > > all PCI2PCI bridges support memory forwarding) and skip the probing.
> > > > Thus, only the first call will perform the disruptive probing and sets
> > > > the resource flags as required - which we can be reasonably sure happens
> > > > before any devices have been configured.
> > > > Avoiding repeated calls to pci_bridge_check_ranges might be even nicer.
> > > > Unfortunately I couldn't come up with a clean way to do it without a
> > > > major probing code refactoring.
> > > 
> > > I'm OK with major probe code refactoring as long as it's done
> > > carefully.  Doing a special-case fix like this solves the immediate
> > > problem but adds to the long-term maintenance problem.
> > > 
> > > As far as I can tell, everything in pci_bridge_check_ranges() should
> > > be done once at enumeration-time, e.g., in the pci_read_bridge_bases()
> > > path, and pci_bridge_check_ranges() itself should be removed.
> > > 
> > > If that turns out to be impossible for some reason, we need a comment
> > > explaining why.
> > 
> > Maybe possible but I am not sure how.
> > 
> > Here's why:
> > 
> > Upon hotplug we want to poke at new bridges if any, but not the old
> > ones.  The issue is that e.g. with ACPI hotplug the event that Linux
> > knows how to handle is by design a heavy weight bus rescan.
> 
> Yeah, it's tricky.  But I don't think it's PCI or ACPI that makes this
> tricky; I think it's just the historical baggage of the PCI core
> design that makes it hard.
> 
> Even in the ACPI hotplug path, I think we use this pci_scan_device()
> path:
> 
>   pci_scan_device
>     pci_setup_device
>       case PCI_HEADER_TYPE_NORMAL:
>         pci_read_bases(6)             # normal PCI BARs
>       case PCI_HEADER_TYPE_BRIDGE:
>         pci_read_bases(2)             # bridge BARs (not windows)
> 
> Unfortunately that path doesn't call pci_read_bridge_bases() to read
> the bridge windows; that currently happens in pcibios_fixup_bus(),
> which is only called from pci_scan_child_bus_extend().
> 
> This is a broken design because reading the bridge apertures is not at
> all platform-specific, so it shouldn't be done in a pcibios hook.
> And, more to the issue at hand, it shouldn't be done in
> pci_scan_child_bus() either.  We might have to *update* the windows
> when scanning child buses, but we should be able to do the work of
> finding out what windows are implemented and their properties
> somewhere in the pci_setup_device() path.
> 
> > Specifically 
> > 
> > pci_read_bridge_bases does not
> > seem to be called on ACPI hotplug path.
> > 
> > Rather,
> > 
> > pci_assign_unassigned_root_bus_resources
> > pci_assign_unassigned_bridge_resources
> > 
> > would be the two functions in question.
> > 
> > 
> > Would above explanation be sufficient? If not, since I understand your
> > reluctance to pile up hacks, would you be open to doing the suggested
> > rewrite yourself? Me and xuyandong can help test it.
> 
> I'll be on vacation or holiday most of the time until the new year,
> but I put a reminder on my calendar to look at this again then.  I'm
> pretty sure we've tried to unravel this in the past, but I can't
> remember what issues we tripped over.  Maybe we can make some progress
> by restricting the problem we're trying to solve.
> 
> Thanks for bringing this up!  This is a wart in the PCI core that has
> bothered me for a long time, and maybe this is the incentive we need
> to make some progress on it.
> 
> Bjorn


Sounds good, let me know when I can help with testing.


> > > > Reported-by: xuyandong <xuyandong2@...wei.com>
> > > > Tested-by: xuyandong <xuyandong2@...wei.com>
> > > > Cc: stable@...r.kernel.org
> > > > Cc: Yinghai Lu <yinghai@...nel.org>
> > > > Cc: Jesse Barnes <jbarnes@...tuousgeek.org>
> > > > Signed-off-by: Michael S. Tsirkin <mst@...hat.com>
> > > > ---
> > > > 
> > > > Please review and consider for stable.
> > > > 
> > > > changes from v1:
> > > >   comment and commit log updates to address comments by Bjorn.
> > > > 
> > > >  drivers/pci/setup-bus.c | 10 ++++++++++
> > > >  1 file changed, 10 insertions(+)
> > > > 
> > > > diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
> > > > index ed960436df5e..d5c25d465d97 100644
> > > > --- a/drivers/pci/setup-bus.c
> > > > +++ b/drivers/pci/setup-bus.c
> > > > @@ -741,6 +741,16 @@ static void pci_bridge_check_ranges(struct pci_bus *bus)
> > > >   struct resource *b_res;
> > > >  
> > > >   b_res = &bridge->resource[PCI_BRIDGE_RESOURCES];
> > > > +
> > > > + /*
> > > > +  * Don't re-check after this was called once already:
> > > > +  * important since bridge might be in use.
> > > > +  * Note: this is only reliable because as per spec all PCI to PCI
> > > > +  * bridges support memory unconditionally so IORESOURCE_MEM is set.
> > > > +  */
> > > > + if (b_res[1].flags & IORESOURCE_MEM)
> > > > +         return;
> > > > +
> > > >   b_res[1].flags |= IORESOURCE_MEM;
> > > >  
> > > >   pci_read_config_word(bridge, PCI_IO_BASE, &io);
> > > > -- 
> > > > MST

Powered by blists - more mailing lists