[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1545392724-6637-2-git-send-email-jianxin.pan@amlogic.com>
Date: Fri, 21 Dec 2018 19:45:23 +0800
From: Jianxin Pan <jianxin.pan@...ogic.com>
To: Boris Brezillon <boris.brezillon@...tlin.com>,
<linux-mtd@...ts.infradead.org>
CC: Liang Yang <liang.yang@...ogic.com>,
Yixun Lan <yixun.lan@...ogic.com>,
Jianxin Pan <jianxin.pan@...ogic.com>,
David Woodhouse <dwmw2@...radead.org>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Brian Norris <computersforpeace@...il.com>,
Marek Vasut <marek.vasut@...il.com>,
Richard Weinberger <richard@....at>,
Jerome Brunet <jbrunet@...libre.com>,
Neil Armstrong <narmstrong@...libre.com>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
Carlo Caione <carlo@...one.org>,
Kevin Hilman <khilman@...libre.com>,
Rob Herring <robh@...nel.org>, Jian Hu <jian.hu@...ogic.com>,
Hanjie Lin <hanjie.lin@...ogic.com>,
Victor Wan <victor.wan@...ogic.com>,
<linux-amlogic@...ts.infradead.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>
Subject: [PATCH RESEND v8 1/2] dt-bindings: nand: meson: add Amlogic NAND controller driver
From: Liang Yang <liang.yang@...ogic.com>
Add Amlogic NAND controller dt-bindings for Meson SoC,
Current this driver support GXBB/GXL/AXG platform.
Signed-off-by: Liang Yang <liang.yang@...ogic.com>
Signed-off-by: Yixun Lan <yixun.lan@...ogic.com>
Signed-off-by: Jianxin Pan <jianxin.pan@...ogic.com>
Reviewed-by: Rob Herring <robh@...nel.org>
---
.../devicetree/bindings/mtd/amlogic,meson-nand.txt | 60 ++++++++++++++++++++++
1 file changed, 60 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
new file mode 100644
index 0000000..3983c11
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
@@ -0,0 +1,60 @@
+Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
+
+This file documents the properties in addition to those available in
+the MTD NAND bindings.
+
+Required properties:
+- compatible : contains one of:
+ - "amlogic,meson-gxl-nfc"
+ - "amlogic,meson-axg-nfc"
+- clocks :
+ A list of phandle + clock-specifier pairs for the clocks listed
+ in clock-names.
+
+- clock-names: Should contain the following:
+ "core" - NFC module gate clock
+ "device" - device clock from eMMC sub clock controller
+ "rx" - rx clock phase
+ "tx" - tx clock phase
+
+- amlogic,mmc-syscon : Required for NAND clocks, it's shared with SD/eMMC
+ controller port C
+
+Optional children nodes:
+Children nodes represent the available nand chips.
+
+Other properties:
+see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings.
+
+Example demonstrate on AXG SoC:
+
+ sd_emmc_c_clkc: mmc@...0 {
+ compatible = "amlogic,meson-axg-mmc-clkc", "syscon";
+ reg = <0x0 0x7000 0x0 0x800>;
+ };
+
+ nand-controller@...0 {
+ compatible = "amlogic,meson-axg-nfc";
+ reg = <0x0 0x7800 0x0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
+
+ clocks = <&clkc CLKID_SD_EMMC_C>,
+ <&sd_emmc_c_clkc CLKID_MMC_DIV>,
+ <&sd_emmc_c_clkc CLKID_MMC_PHASE_RX>,
+ <&sd_emmc_c_clkc CLKID_MMC_PHASE_TX>;
+ clock-names = "core", "device", "rx", "tx";
+ amlogic,mmc-syscon = <&sd_emmc_c_clkc>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_pins>;
+
+ nand@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-on-flash-bbt;
+ };
+ };
--
1.9.1
Powered by blists - more mailing lists