lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1545397111-24183-7-git-send-email-qii.wang@mediatek.com>
Date:   Fri, 21 Dec 2018 20:58:31 +0800
From:   qii wang <qii.wang@...iatek.com>
To:     <wsa@...-dreams.de>
CC:     <linux-i2c@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>,
        <linux-mediatek@...ts.infradead.org>,
        <srv_heupstream@...iatek.com>, <leilk.liu@...iatek.com>,
        <qii.wang@...iatek.com>, <ryder.lee@...iatek.com>
Subject: [PATCH 6/6] i2c: mediatek: Add i2c support for MediaTek MT8183

Add i2c compatible for MT8183. Compare to 2712 i2c controller, MT8183 has
different registers, offsets, clock, and multi-user function.

Signed-off-by: qii wang <qii.wang@...iatek.com>
---
 drivers/i2c/busses/i2c-mt65xx.c |  127 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 120 insertions(+), 7 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 428ac99..19f0770 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -35,17 +35,21 @@
 #include <linux/slab.h>
 
 #define I2C_RS_TRANSFER			(1 << 4)
+#define I2C_ARB_LOST			(1 << 3)
 #define I2C_HS_NACKERR			(1 << 2)
 #define I2C_ACKERR			(1 << 1)
 #define I2C_TRANSAC_COMP		(1 << 0)
 #define I2C_TRANSAC_START		(1 << 0)
 #define I2C_RS_MUL_CNFG			(1 << 15)
 #define I2C_RS_MUL_TRIG			(1 << 14)
+#define I2C_HS_TIME_EN			(1 << 7)
 #define I2C_DCM_DISABLE			0x0000
 #define I2C_IO_CONFIG_OPEN_DRAIN	0x0003
 #define I2C_IO_CONFIG_PUSH_PULL		0x0000
 #define I2C_SOFT_RST			0x0001
 #define I2C_FIFO_ADDR_CLR		0x0001
+#define I2C_FIFO_ADDR_CLRH		0x0002
+#define I2C_HFIFO_DATA			0x8208
 #define I2C_DELAY_LEN			0x0002
 #define I2C_ST_START_CON		0x8001
 #define I2C_FS_START_CON		0x1800
@@ -76,6 +80,8 @@
 #define I2C_CONTROL_DIR_CHANGE          (0x1 << 4)
 #define I2C_CONTROL_ACKERR_DET_EN       (0x1 << 5)
 #define I2C_CONTROL_TRANSFER_LEN_CHANGE (0x1 << 6)
+#define I2C_CONTROL_DMAACK_EN           (0x1 << 8)
+#define I2C_CONTROL_ASYNC_MODE          (0x1 << 9)
 #define I2C_CONTROL_WRAPPER             (0x1 << 0)
 
 #define I2C_DRV_NAME		"i2c-mt65xx"
@@ -130,6 +136,15 @@ enum I2C_REGS_OFFSET {
 	OFFSET_DEBUGCTRL,
 	OFFSET_TRANSFER_LEN_AUX,
 	OFFSET_CLOCK_DIV,
+	/* MT8183 only regs */
+	OFFSET_LTIMING,
+	OFFSET_DATA_TIMING,
+	OFFSET_MCU_INTR,
+	OFFSET_HW_TIMEOUT,
+	OFFSET_HFIFO_DATA,
+	OFFSET_HFIFO_STAT,
+	OFFSET_MULTI_DMA,
+	OFFSET_ROLLBACK,
 };
 
 static const u16 mt_i2c_regs_v1[] = {
@@ -159,6 +174,39 @@ enum I2C_REGS_OFFSET {
 	[OFFSET_CLOCK_DIV] = 0x70,
 };
 
+static const u16 mt_i2c_regs_v2[] = {
+	[OFFSET_DATA_PORT] = 0x0,
+	[OFFSET_SLAVE_ADDR] = 0x4,
+	[OFFSET_INTR_MASK] = 0x8,
+	[OFFSET_INTR_STAT] = 0xc,
+	[OFFSET_CONTROL] = 0x10,
+	[OFFSET_TRANSFER_LEN] = 0x14,
+	[OFFSET_TRANSAC_LEN] = 0x18,
+	[OFFSET_DELAY_LEN] = 0x1c,
+	[OFFSET_TIMING] = 0x20,
+	[OFFSET_START] = 0x24,
+	[OFFSET_EXT_CONF] = 0x28,
+	[OFFSET_LTIMING] = 0x2c,
+	[OFFSET_HS] = 0x30,
+	[OFFSET_IO_CONFIG] = 0x34,
+	[OFFSET_FIFO_ADDR_CLR] = 0x38,
+	[OFFSET_DATA_TIMING] = 0x3c,
+	[OFFSET_MCU_INTR] = 0x40,
+	[OFFSET_TRANSFER_LEN_AUX] = 0x44,
+	[OFFSET_CLOCK_DIV] = 0x48,
+	[OFFSET_HW_TIMEOUT] = 0x4c,
+	[OFFSET_SOFTRESET] = 0x50,
+	[OFFSET_HFIFO_DATA] = 0x70,
+	[OFFSET_DEBUGSTAT] = 0xe0,
+	[OFFSET_DEBUGCTRL] = 0xe8,
+	[OFFSET_FIFO_STAT] = 0xf4,
+	[OFFSET_FIFO_THRESH] = 0xf8,
+	[OFFSET_HFIFO_STAT] = 0xfc,
+	[OFFSET_DCM_EN] = 0xf88,
+	[OFFSET_MULTI_DMA] = 0xf8c,
+	[OFFSET_ROLLBACK] = 0xf98,
+};
+
 struct mtk_i2c_compatible {
 	const struct i2c_adapter_quirks *quirks;
 	const u16 *regs;
@@ -168,6 +216,7 @@ struct mtk_i2c_compatible {
 	unsigned char aux_len_reg: 1;
 	unsigned char support_33bits: 1;
 	unsigned char timing_adjust: 1;
+	unsigned char dma_sync: 1;
 };
 
 struct mtk_i2c {
@@ -181,8 +230,10 @@ struct mtk_i2c {
 	struct clk *clk_main;		/* main clock for i2c bus */
 	struct clk *clk_dma;		/* DMA clock for i2c via DMA */
 	struct clk *clk_pmic;		/* PMIC clock for i2c from PMIC */
+	struct clk *clk_arb;		/* Arbitrator clock for i2c */
 	bool have_pmic;			/* can use i2c pins from PMIC */
 	bool use_push_pull;		/* IO config push-pull mode */
+	bool share_i3c;			/* share i3c IP */
 
 	u16 irq_stat;			/* interrupt status */
 	unsigned int clk_src_div;
@@ -190,6 +241,7 @@ struct mtk_i2c {
 	enum mtk_trans_op op;
 	u16 timing_reg;
 	u16 high_speed_reg;
+	u16 ltiming_reg;
 	unsigned char auto_restart;
 	bool ignore_restart_irq;
 	const struct mtk_i2c_compatible *dev_comp;
@@ -216,6 +268,7 @@ struct mtk_i2c {
 	.aux_len_reg = 1,
 	.support_33bits = 1,
 	.timing_adjust = 1,
+	.dma_sync = 0,
 };
 
 static const struct mtk_i2c_compatible mt6577_compat = {
@@ -227,6 +280,7 @@ struct mtk_i2c {
 	.aux_len_reg = 0,
 	.support_33bits = 0,
 	.timing_adjust = 0,
+	.dma_sync = 0,
 };
 
 static const struct mtk_i2c_compatible mt6589_compat = {
@@ -238,6 +292,7 @@ struct mtk_i2c {
 	.aux_len_reg = 0,
 	.support_33bits = 0,
 	.timing_adjust = 0,
+	.dma_sync = 0,
 };
 
 static const struct mtk_i2c_compatible mt7622_compat = {
@@ -249,6 +304,7 @@ struct mtk_i2c {
 	.aux_len_reg = 1,
 	.support_33bits = 0,
 	.timing_adjust = 0,
+	.dma_sync = 0,
 };
 
 static const struct mtk_i2c_compatible mt8173_compat = {
@@ -259,6 +315,18 @@ struct mtk_i2c {
 	.aux_len_reg = 1,
 	.support_33bits = 1,
 	.timing_adjust = 0,
+	.dma_sync = 0,
+};
+
+static const struct mtk_i2c_compatible mt8183_compat = {
+	.regs = mt_i2c_regs_v2,
+	.pmic_i2c = 0,
+	.dcm = 0,
+	.auto_restart = 1,
+	.aux_len_reg = 1,
+	.support_33bits = 1,
+	.timing_adjust = 1,
+	.dma_sync = 1,
 };
 
 static const struct of_device_id mtk_i2c_of_match[] = {
@@ -267,6 +335,7 @@ struct mtk_i2c {
 	{ .compatible = "mediatek,mt6589-i2c", .data = &mt6589_compat },
 	{ .compatible = "mediatek,mt7622-i2c", .data = &mt7622_compat },
 	{ .compatible = "mediatek,mt8173-i2c", .data = &mt8173_compat },
+	{ .compatible = "mediatek,mt8183-i2c", .data = &mt8183_compat },
 	{}
 };
 MODULE_DEVICE_TABLE(of, mtk_i2c_of_match);
@@ -299,8 +368,18 @@ static int mtk_i2c_clock_enable(struct mtk_i2c *i2c)
 		if (ret)
 			goto err_pmic;
 	}
+
+	if (i2c->clk_arb) {
+		ret = clk_prepare_enable(i2c->clk_arb);
+		if (ret)
+			goto err_arb;
+	}
+
 	return 0;
 
+err_arb:
+	if (i2c->have_pmic)
+		clk_disable_unprepare(i2c->clk_pmic);
 err_pmic:
 	clk_disable_unprepare(i2c->clk_main);
 err_main:
@@ -311,6 +390,9 @@ static int mtk_i2c_clock_enable(struct mtk_i2c *i2c)
 
 static void mtk_i2c_clock_disable(struct mtk_i2c *i2c)
 {
+	if (i2c->clk_arb)
+		clk_disable_unprepare(i2c->clk_arb);
+
 	if (i2c->have_pmic)
 		clk_disable_unprepare(i2c->clk_pmic);
 
@@ -333,11 +415,19 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
 	if (i2c->dev_comp->dcm)
 		mtk_i2c_writew(i2c, I2C_DCM_DISABLE, OFFSET_DCM_EN);
 
-	if (i2c->dev_comp->timing_adjust)
+	if (i2c->dev_comp->timing_adjust && i2c->share_i3c) {
+		mtk_i2c_writew(i2c, (I2C_DEFAULT_CLK_DIV - 1) |
+				    (I2C_DEFAULT_CLK_DIV - 1) << 8,
+				    OFFSET_CLOCK_DIV);
+		i2c->high_speed_reg |= I2C_HS_TIME_EN;
+	} else {
 		mtk_i2c_writew(i2c, I2C_DEFAULT_CLK_DIV - 1, OFFSET_CLOCK_DIV);
+	}
 
 	mtk_i2c_writew(i2c, i2c->timing_reg, OFFSET_TIMING);
 	mtk_i2c_writew(i2c, i2c->high_speed_reg, OFFSET_HS);
+	if (i2c->dev_comp->regs == mt_i2c_regs_v2)
+		mtk_i2c_writew(i2c, i2c->ltiming_reg, OFFSET_LTIMING);
 
 	/* If use i2c pin from PMIC mt6397 side, need set PATH_DIR first */
 	if (i2c->have_pmic)
@@ -345,6 +435,9 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
 
 	control_reg = I2C_CONTROL_ACKERR_DET_EN |
 		      I2C_CONTROL_CLK_EXT_EN | I2C_CONTROL_DMA_EN;
+	if (i2c->dev_comp->dma_sync)
+		control_reg |= I2C_CONTROL_DMAACK_EN | I2C_CONTROL_ASYNC_MODE;
+
 	mtk_i2c_writew(i2c, control_reg, OFFSET_CONTROL);
 	mtk_i2c_writew(i2c, I2C_DELAY_LEN, OFFSET_DELAY_LEN);
 
@@ -434,6 +527,8 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
 	unsigned int clk_src;
 	unsigned int step_cnt;
 	unsigned int sample_cnt;
+	unsigned int l_step_cnt;
+	unsigned int l_sample_cnt;
 	unsigned int target_speed;
 	int ret;
 
@@ -443,11 +538,11 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
 	if (target_speed > MAX_FS_MODE_SPEED) {
 		/* Set master code speed register */
 		ret = mtk_i2c_calculate_speed(i2c, clk_src, MAX_FS_MODE_SPEED,
-					      &step_cnt, &sample_cnt);
+					      &l_step_cnt, &l_sample_cnt);
 		if (ret < 0)
 			return ret;
 
-		i2c->timing_reg = (sample_cnt << 8) | step_cnt;
+		i2c->timing_reg = (l_sample_cnt << 8) | l_step_cnt;
 
 		/* Set the high speed mode register */
 		ret = mtk_i2c_calculate_speed(i2c, clk_src, target_speed,
@@ -457,6 +552,8 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
 
 		i2c->high_speed_reg = I2C_TIME_DEFAULT_VALUE |
 			(sample_cnt << 12) | (step_cnt << 8);
+		i2c->ltiming_reg = (l_sample_cnt << 6) | l_step_cnt |
+				   (sample_cnt << 12) | (step_cnt << 9);
 	} else {
 		ret = mtk_i2c_calculate_speed(i2c, clk_src, target_speed,
 					      &step_cnt, &sample_cnt);
@@ -467,6 +564,8 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
 
 		/* Disable the high speed transaction */
 		i2c->high_speed_reg = I2C_TIME_CLR_VALUE;
+
+		i2c->ltiming_reg = (sample_cnt << 6) | step_cnt;
 	}
 
 	return 0;
@@ -483,6 +582,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 	u16 addr_reg;
 	u16 start_reg;
 	u16 control_reg;
+	u16 fifo_clr_reg = I2C_FIFO_ADDR_CLR;
 	u16 restart_flag = 0;
 	u32 reg_4g_mode;
 	u8 *dma_rd_buf = NULL;
@@ -519,13 +619,21 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 
 	/* Clear interrupt status */
 	mtk_i2c_writew(i2c, restart_flag | I2C_HS_NACKERR | I2C_ACKERR |
-	       I2C_TRANSAC_COMP, OFFSET_INTR_STAT);
+			    I2C_ARB_LOST | I2C_TRANSAC_COMP,
+			    OFFSET_INTR_STAT);
+
+	if (i2c->share_i3c)
+		fifo_clr_reg |= I2C_FIFO_ADDR_CLRH;
 
-	mtk_i2c_writew(i2c, I2C_FIFO_ADDR_CLR, OFFSET_FIFO_ADDR_CLR);
+	mtk_i2c_writew(i2c, fifo_clr_reg, OFFSET_FIFO_ADDR_CLR);
+
+	if ((i2c->speed_hz > MAX_FS_MODE_SPEED) && i2c->share_i3c)
+		mtk_i2c_writew(i2c, I2C_HFIFO_DATA, OFFSET_HFIFO_DATA);
 
 	/* Enable interrupt */
 	mtk_i2c_writew(i2c, restart_flag | I2C_HS_NACKERR | I2C_ACKERR |
-	       I2C_TRANSAC_COMP, OFFSET_INTR_MASK);
+			    I2C_ARB_LOST | I2C_TRANSAC_COMP,
+			    OFFSET_INTR_MASK);
 
 	/* Set transfer and transaction len */
 	if (i2c->op == I2C_MASTER_WRRD) {
@@ -659,7 +767,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 
 	/* Clear interrupt mask */
 	mtk_i2c_writew(i2c, ~(restart_flag | I2C_HS_NACKERR | I2C_ACKERR |
-	       I2C_TRANSAC_COMP), OFFSET_INTR_MASK);
+			    I2C_ARB_LOST | I2C_TRANSAC_COMP), OFFSET_INTR_MASK);
 
 	if (i2c->op == I2C_MASTER_WR) {
 		dma_unmap_single(i2c->dev, wpaddr,
@@ -817,6 +925,7 @@ static int mtk_i2c_parse_dt(struct device_node *np, struct mtk_i2c *i2c)
 	if (i2c->clk_src_div == 0)
 		return -EINVAL;
 
+	i2c->share_i3c = of_property_read_bool(np, "mediatek,share-i3c");
 	i2c->have_pmic = of_property_read_bool(np, "mediatek,have-pmic");
 	i2c->use_push_pull =
 		of_property_read_bool(np, "mediatek,use-push-pull");
@@ -884,6 +993,10 @@ static int mtk_i2c_probe(struct platform_device *pdev)
 		return PTR_ERR(i2c->clk_dma);
 	}
 
+	i2c->clk_arb = devm_clk_get(&pdev->dev, "arb");
+	if (IS_ERR(i2c->clk_arb))
+		i2c->clk_arb = NULL;
+
 	clk = i2c->clk_main;
 	if (i2c->have_pmic) {
 		i2c->clk_pmic = devm_clk_get(&pdev->dev, "pmic");
-- 
1.7.9.5

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ