[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1545634358-17485-1-git-send-email-masonccyang@mxic.com.tw>
Date: Mon, 24 Dec 2018 14:52:36 +0800
From: Mason Yang <masonccyang@...c.com.tw>
To: broonie@...nel.org, marek.vasut@...il.com,
linux-kernel@...r.kernel.org, linux-spi@...r.kernel.org,
boris.brezillon@...tlin.com, linux-renesas-soc@...r.kernel.org,
Geert Uytterhoeven <geert+renesas@...der.be>,
sergei.shtylyov@...entembedded.com
Cc: juliensu@...c.com.tw, Simon Horman <horms@...ge.net.au>,
zhengxunli@...c.com.tw, Mason Yang <masonccyang@...c.com.tw>
Subject: [PATCH v4 0/2] spi: Add Renesas R-Car Gen3 RPC SPI driver
Hi Mark,
This Renesas R-Car Gen3 RPC SPI driver is based on Boris's new
spi-mem direct mapping read/write mode [1][2].
v4 patch is according to Sergei's comments including:
1) Drop soc_device_match()
2) Drop unused RPC registers
3) Use ilog2() instead of fls()
4) Patch read 6 bytes ID w/ one command.
5) Coding style and so on.
v3 patch is according to Marek and Geert's comments including:
1) soc_device_mach() to set up RPC_PHYCNT_STRTIM.
2) get_unaligned()
3) rpc-mode for rpi-spi-flash or rpc-hyperflash.
4) coding style and so on.
v2 patch including:
1) remove RPC clock enable/dis-able control,
2) patch run time PM,
3) add RPC module software reset,
4) add regmap,
5) other coding style and so on.
thanks for your review.
best regards,
Mason
[1] https://patchwork.kernel.org/patch/10670753
[2] https://patchwork.kernel.org/patch/10670747
Mason Yang (2):
spi: Add Renesas R-Car Gen3 RPC SPI controller driver
dt-bindings: spi: Document Renesas R-Car Gen3 RPC controller bindings
.../devicetree/bindings/spi/spi-renesas-rpc.txt | 37 +
drivers/spi/Kconfig | 6 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-renesas-rpc.c | 788 +++++++++++++++++++++
4 files changed, 832 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
create mode 100644 drivers/spi/spi-renesas-rpc.c
--
1.9.1
Powered by blists - more mailing lists