| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CANMq1KA1ywLnQDzXRbLcuu-afXuj_yrprRBC4kejF4-20ztXyA@mail.gmail.com>
Date: Tue, 25 Dec 2018 15:16:42 +0800
From: Nicolas Boichat <drinkcat@...omium.org>
To: Long Cheng <long.cheng@...iatek.com>
Cc: Vinod Koul <vkoul@...nel.org>,
Randy Dunlap <rdunlap@...radead.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Ryder Lee <ryder.lee@...iatek.com>,
Sean Wang <sean.wang@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Dan Williams <dan.j.williams@...el.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jslaby@...e.com>,
Sean Wang <sean.wang@...iatek.com>, dmaengine@...r.kernel.org,
devicetree@...r.kernel.org,
linux-arm Mailing List <linux-arm-kernel@...ts.infradead.org>,
linux-mediatek@...ts.infradead.org,
lkml <linux-kernel@...r.kernel.org>,
linux-serial@...r.kernel.org, srv_heupstream@...iatek.com,
Yingjoe Chen <yingjoe.chen@...iatek.com>,
YT Shen <yt.shen@...iatek.com>
Subject: Re: [PATCH v7 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
Not a full review, a few comments below.
Thanks,
On Tue, Dec 25, 2018 at 9:27 AM Long Cheng <long.cheng@...iatek.com> wrote:
>
> In DMA engine framework, add 8250 uart dma to support MediaTek uart.
> If MediaTek uart enabled(SERIAL_8250_MT6577), and want to improve
> the performance, can enable the function.
>
> Signed-off-by: Long Cheng <long.cheng@...iatek.com>
> ---
> drivers/dma/mediatek/8250_mtk_dma.c | 694 +++++++++++++++++++++++++++++++++++
> drivers/dma/mediatek/Kconfig | 11 +
> drivers/dma/mediatek/Makefile | 1 +
> 3 files changed, 706 insertions(+)
> create mode 100644 drivers/dma/mediatek/8250_mtk_dma.c
>
> diff --git a/drivers/dma/mediatek/8250_mtk_dma.c b/drivers/dma/mediatek/8250_mtk_dma.c
> new file mode 100644
> index 0000000..c4090f2
> --- /dev/null
> +++ b/drivers/dma/mediatek/8250_mtk_dma.c
> @@ -0,0 +1,694 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * MediaTek 8250 DMA driver.
> + *
> + * Copyright (c) 2018 MediaTek Inc.
> + * Author: Long Cheng <long.cheng@...iatek.com>
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/dmaengine.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/list.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_dma.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/iopoll.h>
Alphabetical order.
> +
> +#include "../virt-dma.h"
> +
> +#define MTK_UART_APDMA_CHANNELS (CONFIG_SERIAL_8250_NR_UARTS * 2)
> +
> +#define VFF_EN_B BIT(0)
> +#define VFF_STOP_B BIT(0)
> +#define VFF_FLUSH_B BIT(0)
> +#define VFF_4G_SUPPORT_B BIT(0)
> +#define VFF_RX_INT_EN0_B BIT(0) /*rx valid size >= vff thre*/
> +#define VFF_RX_INT_EN1_B BIT(1)
> +#define VFF_TX_INT_EN_B BIT(0) /*tx left size >= vff thre*/
> +#define VFF_WARM_RST_B BIT(0)
> +#define VFF_RX_INT_FLAG_CLR_B (BIT(0) | BIT(1))
> +#define VFF_TX_INT_FLAG_CLR_B 0
> +#define VFF_STOP_CLR_B 0
> +#define VFF_FLUSH_CLR_B 0
> +#define VFF_INT_EN_CLR_B 0
> +#define VFF_4G_SUPPORT_CLR_B 0
> +
> +/* interrupt trigger level for tx */
> +#define VFF_TX_THRE(n) ((n) * 7 / 8)
> +/* interrupt trigger level for rx */
> +#define VFF_RX_THRE(n) ((n) * 3 / 4)
> +
> +#define MTK_UART_APDMA_RING_SIZE 0xffffU
> +/* invert this bit when wrap ring head again*/
> +#define MTK_UART_APDMA_RING_WRAP 0x10000U
> +
> +#define VFF_INT_FLAG 0x00
> +#define VFF_INT_EN 0x04
> +#define VFF_EN 0x08
> +#define VFF_RST 0x0c
> +#define VFF_STOP 0x10
> +#define VFF_FLUSH 0x14
> +#define VFF_ADDR 0x1c
> +#define VFF_LEN 0x24
> +#define VFF_THRE 0x28
> +#define VFF_WPT 0x2c
> +#define VFF_RPT 0x30
> +/*TX: the buffer size HW can read. RX: the buffer size SW can read.*/
> +#define VFF_VALID_SIZE 0x3c
> +/*TX: the buffer size SW can write. RX: the buffer size HW can write.*/
> +#define VFF_LEFT_SIZE 0x40
> +#define VFF_DEBUG_STATUS 0x50
> +#define VFF_4G_SUPPORT 0x54
> +
> +struct mtk_uart_apdmadev {
> + struct dma_device ddev;
> + struct clk *clk;
> + bool support_33bits;
> + unsigned int dma_irq[MTK_UART_APDMA_CHANNELS];
> +};
> +
> +struct mtk_uart_apdma_desc {
> + struct virt_dma_desc vd;
> +
> + unsigned int avail_len;
> +};
> +
> +struct mtk_chan {
> + struct virt_dma_chan vc;
> + struct dma_slave_config cfg;
> + void __iomem *base;
> + struct mtk_uart_apdma_desc *desc;
> +
> + bool requested;
> +
> + unsigned int rx_status;
> +};
> +
> +static inline struct mtk_uart_apdmadev *
> +to_mtk_uart_apdma_dev(struct dma_device *d)
> +{
> + return container_of(d, struct mtk_uart_apdmadev, ddev);
> +}
> +
> +static inline struct mtk_chan *to_mtk_uart_apdma_chan(struct dma_chan *c)
> +{
> + return container_of(c, struct mtk_chan, vc.chan);
> +}
> +
> +static inline struct mtk_uart_apdma_desc *to_mtk_uart_apdma_desc
> + (struct dma_async_tx_descriptor *t)
> +{
> + return container_of(t, struct mtk_uart_apdma_desc, vd.tx);
> +}
> +
> +static void mtk_uart_apdma_chan_write(struct mtk_chan *c,
> + unsigned int reg, unsigned int val)
> +{
> + writel(val, c->base + reg);
> +}
> +
> +static unsigned int
> +mtk_uart_apdma_chan_read(struct mtk_chan *c, unsigned int reg)
> +{
> + return readl(c->base + reg);
> +}
> +
> +static void mtk_uart_apdma_desc_free(struct virt_dma_desc *vd)
> +{
> + struct dma_chan *chan = vd->tx.chan;
> + struct mtk_chan *c = to_mtk_uart_apdma_chan(chan);
> +
> + kfree(c->desc);
> + c->desc = NULL;
Why? I'm afraid this may mask double-free.
> +}
> +
> +static void mtk_uart_apdma_start_tx(struct mtk_chan *c)
> +{
> + unsigned int txcount = c->desc->avail_len;
Variable name is confusing... I'd rather have a boolean `transmitted`
(or something), set to 0 here, and set to 1 in the loop (but again,
maybe this is not necessary at all, see below).
> + unsigned int len, send, left, wpt, wrap;
> +
> + if (mtk_uart_apdma_chan_read(c, VFF_LEFT_SIZE) == 0U) {
> + mtk_uart_apdma_chan_write(c, VFF_INT_EN, VFF_TX_INT_EN_B);
I'd add a "return;" here and de-indent the rest of the function (that
should help to make it more readable).
> + } else {
> + len = mtk_uart_apdma_chan_read(c, VFF_LEN);
You make an assumption below that len is always a power of 2. I wonder
if we want to validate that with some BUG/WARN call.
Also, I assume VFF_LEN is constant? Maybe we can read it once only in
the probe function?
> +
> + while (((left = mtk_uart_apdma_chan_read(c,
> + VFF_LEFT_SIZE)) > 0U)
> + && (c->desc->avail_len != 0U)) {
Why do we need a while loop here? LEFT_SIZE will always be smaller
than LEN, right? Shouldn't we load as much as we can, then let an
interrupt happen and reload the FIFO at that stage? Or does this help
gain a bit of extra performance?
> + send = min_t(unsigned int, left, c->desc->avail_len);
> + wpt = mtk_uart_apdma_chan_read(c, VFF_WPT);
> + wrap = wpt & MTK_UART_APDMA_RING_WRAP ?
wrap = wrp ^ MTK_UART_APDMA_RING_WRAP ?
> + 0U : MTK_UART_APDMA_RING_WRAP;
> +
> + if ((wpt & (len - 1U)) + send < len)
> + mtk_uart_apdma_chan_write(c,
> + VFF_WPT, wpt + send);
> + else
> + mtk_uart_apdma_chan_write(c, VFF_WPT,
> + ((wpt + send) & (len - 1U))
> + | wrap);
> +
> + c->desc->avail_len -= send;
> + }
> +
> + if (txcount != c->desc->avail_len) {
We know mtk_uart_apdma_chan_read(c, VFF_LEFT_SIZE) > 0 at least once,
so this test should always be true.
Unless we have c->desc->avail_len == 0, but then we won't even call
this function... So this is always true.
> + mtk_uart_apdma_chan_write(c,
> + VFF_INT_EN, VFF_TX_INT_EN_B);
> + if (mtk_uart_apdma_chan_read(c,
> + VFF_FLUSH) == 0U)
> + mtk_uart_apdma_chan_write(c,
> + VFF_FLUSH, VFF_FLUSH_B);
> + }
> + }
> +}
> +
> +static void mtk_uart_apdma_start_rx(struct mtk_chan *c)
> +{
> + struct mtk_uart_apdma_desc *d = c->desc;
> + unsigned int rx_len, wg, rg, count;
> +
> + if (mtk_uart_apdma_chan_read(c, VFF_VALID_SIZE) == 0U)
> + return;
> +
> + if (d && vchan_next_desc(&c->vc)) {
> + rx_len = mtk_uart_apdma_chan_read(c, VFF_LEN);
> + rg = mtk_uart_apdma_chan_read(c, VFF_RPT);
> + wg = mtk_uart_apdma_chan_read(c, VFF_WPT);
> + count = ((rg ^ wg) & MTK_UART_APDMA_RING_WRAP) ?
> + ((wg & MTK_UART_APDMA_RING_SIZE) +
> + rx_len - (rg & MTK_UART_APDMA_RING_SIZE)) :
> + ((wg & MTK_UART_APDMA_RING_SIZE) -
> + (rg & MTK_UART_APDMA_RING_SIZE));
This is hard to read, please use a if/else.
> +
> + c->rx_status = count;
> + mtk_uart_apdma_chan_write(c, VFF_RPT, wg);
> +
> + list_del(&d->vd.node);
> + vchan_cookie_complete(&d->vd);
> + }
> +}
> +
> +static irqreturn_t mtk_uart_apdma_irq_handler(int irq, void *dev_id)
> +{
> + struct dma_chan *chan = (struct dma_chan *)dev_id;
> + struct mtk_chan *c = to_mtk_uart_apdma_chan(chan);
> + struct mtk_uart_apdma_desc *d;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&c->vc.lock, flags);
> + switch (c->cfg.direction) {
> + case DMA_DEV_TO_MEM:
You use an if/else below in a similar case, please be consistent (IMHO
if/else is a bit more compact, so I'd use that here).
> + mtk_uart_apdma_chan_write(c,
> + VFF_INT_FLAG, VFF_RX_INT_FLAG_CLR_B);
> + mtk_uart_apdma_start_rx(c);
> + break;
> + case DMA_MEM_TO_DEV:
> + d = c->desc;
> +
> + mtk_uart_apdma_chan_write(c,
> + VFF_INT_FLAG, VFF_TX_INT_FLAG_CLR_B);
> +
> + if (d->avail_len != 0U) {
> + mtk_uart_apdma_start_tx(c);
> + } else {
> + list_del(&d->vd.node);
> + vchan_cookie_complete(&d->vd);
> + }
> + break;
> + default:
> + break;
> + }
> + spin_unlock_irqrestore(&c->vc.lock, flags);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int mtk_uart_apdma_alloc_chan_resources(struct dma_chan *chan)
> +{
> + struct mtk_uart_apdmadev *mtkd = to_mtk_uart_apdma_dev(chan->device);
> + struct mtk_chan *c = to_mtk_uart_apdma_chan(chan);
> + u32 status;
> + int ret = -EBUSY;
> +
> + pm_runtime_get_sync(mtkd->ddev.dev);
> +
> + mtk_uart_apdma_chan_write(c, VFF_ADDR, 0);
> + mtk_uart_apdma_chan_write(c, VFF_THRE, 0);
> + mtk_uart_apdma_chan_write(c, VFF_LEN, 0);
> + mtk_uart_apdma_chan_write(c, VFF_RST, VFF_WARM_RST_B);
> +
> + ret = readx_poll_timeout(readl,
> + c->base + VFF_EN,
> + status, status == 0, 10, 100);
> + if (ret) {
> + dev_err(c->vc.chan.device->dev,
> + "dma reset: fail, timeout\n");
> + goto exit;
> + }
> +
> + if (!c->requested) {
> + c->requested = true;
> + ret = request_irq(mtkd->dma_irq[chan->chan_id],
> + mtk_uart_apdma_irq_handler,
> + IRQF_TRIGGER_NONE,
> + KBUILD_MODNAME, chan);
> + if (ret < 0) {
> + dev_err(chan->device->dev, "Can't request dma IRQ\n");
> + return -EINVAL;
> + }
> + }
> +
> + if (mtkd->support_33bits)
> + mtk_uart_apdma_chan_write(c,
> + VFF_4G_SUPPORT, VFF_4G_SUPPORT_CLR_B);
> +
> +exit:
> + return ret;
> +}
> +
> +static void mtk_uart_apdma_free_chan_resources(struct dma_chan *chan)
> +{
> + struct mtk_uart_apdmadev *mtkd = to_mtk_uart_apdma_dev(chan->device);
> + struct mtk_chan *c = to_mtk_uart_apdma_chan(chan);
> +
> + if (c->requested) {
> + c->requested = false;
> + free_irq(mtkd->dma_irq[chan->chan_id], chan);
> + }
> +
> + tasklet_kill(&c->vc.task);
> +
> + vchan_free_chan_resources(&c->vc);
> +
> + pm_runtime_put_sync(mtkd->ddev.dev);
> +}
> +
> +static enum dma_status mtk_uart_apdma_tx_status(struct dma_chan *chan,
> + dma_cookie_t cookie,
> + struct dma_tx_state *txstate)
> +{
> + struct mtk_chan *c = to_mtk_uart_apdma_chan(chan);
> + enum dma_status ret;
> + unsigned long flags;
> +
> + if (!txstate)
> + return DMA_ERROR;
> +
> + ret = dma_cookie_status(chan, cookie, txstate);
> + spin_lock_irqsave(&c->vc.lock, flags);
> + if (ret == DMA_IN_PROGRESS) {
> + c->rx_status = mtk_uart_apdma_chan_read(c, VFF_RPT)
> + & MTK_UART_APDMA_RING_SIZE;
> + dma_set_residue(txstate, c->rx_status);
> + } else if (ret == DMA_COMPLETE && c->cfg.direction == DMA_DEV_TO_MEM) {
> + dma_set_residue(txstate, c->rx_status);
> + } else {
> + dma_set_residue(txstate, 0);
> + }
> + spin_unlock_irqrestore(&c->vc.lock, flags);
> +
> + return ret;
> +}
> +
> +/*
> + * dmaengine_prep_slave_single will call the function. and sglen is 1.
> + * 8250 uart using one ring buffer, and deal with one sg.
> + */
> +static struct dma_async_tx_descriptor *mtk_uart_apdma_prep_slave_sg
> + (struct dma_chan *chan, struct scatterlist *sgl,
> + unsigned int sglen, enum dma_transfer_direction dir,
> + unsigned long tx_flags, void *context)
> +{
> + struct mtk_chan *c = to_mtk_uart_apdma_chan(chan);
> + struct mtk_uart_apdma_desc *d;
> +
> + if ((dir != DMA_DEV_TO_MEM) &&
> + (dir != DMA_MEM_TO_DEV)) {
> + dev_err(chan->device->dev, "bad direction\n");
> + return NULL;
> + }
> +
> + /* Now allocate and setup the descriptor */
> + d = kzalloc(sizeof(*d), GFP_ATOMIC);
> + if (!d)
> + return NULL;
> +
> + /* sglen is 1 */
> + d->avail_len = sg_dma_len(sgl);
> +
> + return vchan_tx_prep(&c->vc, &d->vd, tx_flags);
> +}
> +
> +static void mtk_uart_apdma_issue_pending(struct dma_chan *chan)
> +{
> + struct mtk_chan *c = to_mtk_uart_apdma_chan(chan);
> + struct virt_dma_desc *vd;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&c->vc.lock, flags);
> + if (c->cfg.direction == DMA_DEV_TO_MEM) {
> + if (vchan_issue_pending(&c->vc) && !c->desc) {
> + vd = vchan_next_desc(&c->vc);
> + c->desc = to_mtk_uart_apdma_desc(&vd->tx);
> + mtk_uart_apdma_start_rx(c);
> + }
> + } else if (c->cfg.direction == DMA_MEM_TO_DEV) {
> + if (vchan_issue_pending(&c->vc) && !c->desc) {
> + vd = vchan_next_desc(&c->vc);
> + c->desc = to_mtk_uart_apdma_desc(&vd->tx);
> + mtk_uart_apdma_start_tx(c);
> + }
> + }
> + spin_unlock_irqrestore(&c->vc.lock, flags);
> +}
> +
> +static int mtk_uart_apdma_slave_config(struct dma_chan *chan,
> + struct dma_slave_config *cfg)
> +{
> + struct mtk_chan *c = to_mtk_uart_apdma_chan(chan);
> + struct mtk_uart_apdmadev *mtkd =
> + to_mtk_uart_apdma_dev(c->vc.chan.device);
> +
> + c->cfg = *cfg;
> +
> + if (cfg->direction == DMA_DEV_TO_MEM) {
> + unsigned int rx_len = cfg->src_addr_width * 1024;
> +
> + mtk_uart_apdma_chan_write(c, VFF_ADDR, cfg->src_addr);
> + mtk_uart_apdma_chan_write(c, VFF_LEN, rx_len);
> + mtk_uart_apdma_chan_write(c, VFF_THRE, VFF_RX_THRE(rx_len));
> + mtk_uart_apdma_chan_write(c,
> + VFF_INT_EN, VFF_RX_INT_EN0_B
> + | VFF_RX_INT_EN1_B);
> + mtk_uart_apdma_chan_write(c, VFF_RPT, 0);
> + mtk_uart_apdma_chan_write(c,
> + VFF_INT_FLAG, VFF_RX_INT_FLAG_CLR_B);
> + mtk_uart_apdma_chan_write(c, VFF_EN, VFF_EN_B);
> + } else if (cfg->direction == DMA_MEM_TO_DEV) {
> + unsigned int tx_len = cfg->dst_addr_width * 1024;
> +
> + mtk_uart_apdma_chan_write(c, VFF_ADDR, cfg->dst_addr);
> + mtk_uart_apdma_chan_write(c, VFF_LEN, tx_len);
> + mtk_uart_apdma_chan_write(c, VFF_THRE, VFF_TX_THRE(tx_len));
> + mtk_uart_apdma_chan_write(c, VFF_WPT, 0);
> + mtk_uart_apdma_chan_write(c,
> + VFF_INT_FLAG, VFF_TX_INT_FLAG_CLR_B);
> + mtk_uart_apdma_chan_write(c, VFF_EN, VFF_EN_B);
> + }
> +
> + if (mtkd->support_33bits)
> + mtk_uart_apdma_chan_write(c, VFF_4G_SUPPORT, VFF_4G_SUPPORT_B);
> +
> + if (mtk_uart_apdma_chan_read(c, VFF_EN) != VFF_EN_B) {
> + dev_err(chan->device->dev,
> + "config dma dir[%d] fail\n", cfg->direction);
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int mtk_uart_apdma_terminate_all(struct dma_chan *chan)
> +{
> + struct mtk_chan *c = to_mtk_uart_apdma_chan(chan);
> + unsigned long flags;
> + u32 status;
> + int ret;
> +
> + spin_lock_irqsave(&c->vc.lock, flags);
> +
> + mtk_uart_apdma_chan_write(c, VFF_FLUSH, VFF_FLUSH_CLR_B);
> + /* Wait for flush */
> + ret = readx_poll_timeout(readl,
> + c->base + VFF_FLUSH,
> + status,
> + (status & VFF_FLUSH_B) != VFF_FLUSH_B,
> + 10, 100);
> + if (ret)
> + dev_err(c->vc.chan.device->dev,
> + "dma stop: polling FLUSH fail, DEBUG=0x%x\n",
> + mtk_uart_apdma_chan_read(c, VFF_DEBUG_STATUS));
> +
> + /*set stop as 1 -> wait until en is 0 -> set stop as 0*/
> + mtk_uart_apdma_chan_write(c, VFF_STOP, VFF_STOP_B);
> + ret = readx_poll_timeout(readl,
> + c->base + VFF_EN,
> + status, status == 0, 10, 100);
> + if (ret)
> + dev_err(c->vc.chan.device->dev,
> + "dma stop: polling VFF_EN fail, DEBUG=0x%x\n",
> + mtk_uart_apdma_chan_read(c, VFF_DEBUG_STATUS));
> +
> + mtk_uart_apdma_chan_write(c, VFF_STOP, VFF_STOP_CLR_B);
> + mtk_uart_apdma_chan_write(c, VFF_INT_EN, VFF_INT_EN_CLR_B);
> +
> + switch (c->cfg.direction) {
> + case DMA_DEV_TO_MEM:
Ditto, if/else?
> + mtk_uart_apdma_chan_write(c,
> + VFF_INT_FLAG, VFF_RX_INT_FLAG_CLR_B);
> + break;
> + case DMA_MEM_TO_DEV:
> + mtk_uart_apdma_chan_write(c,
> + VFF_INT_FLAG, VFF_TX_INT_FLAG_CLR_B);
> + break;
> + default:
> + break;
> + }
> +
> + spin_unlock_irqrestore(&c->vc.lock, flags);
> +
> + return 0;
> +}
> +
> +static int mtk_uart_apdma_device_pause(struct dma_chan *chan)
> +{
> + /* just for check caps pass */
> + return 0;
> +}
> +
> +static int mtk_uart_apdma_device_resume(struct dma_chan *chan)
> +{
> + /* just for check caps pass */
> + return 0;
> +}
> +
> +static void mtk_uart_apdma_free(struct mtk_uart_apdmadev *mtkd)
> +{
> + while (list_empty(&mtkd->ddev.channels) == 0) {
> + struct mtk_chan *c = list_first_entry(&mtkd->ddev.channels,
> + struct mtk_chan, vc.chan.device_node);
> +
> + list_del(&c->vc.chan.device_node);
> + tasklet_kill(&c->vc.task);
> + }
> +}
> +
> +static const struct of_device_id mtk_uart_apdma_match[] = {
> + { .compatible = "mediatek,mt6577-uart-dma", },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, mtk_uart_apdma_match);
> +
> +static int mtk_uart_apdma_probe(struct platform_device *pdev)
> +{
> + struct mtk_uart_apdmadev *mtkd;
> + struct resource *res;
> + struct mtk_chan *c;
> + unsigned int i;
> + int rc;
> +
> + mtkd = devm_kzalloc(&pdev->dev, sizeof(*mtkd), GFP_KERNEL);
> + if (!mtkd)
> + return -ENOMEM;
> +
> + mtkd->clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(mtkd->clk)) {
> + dev_err(&pdev->dev, "No clock specified\n");
> + rc = PTR_ERR(mtkd->clk);
> + goto err_no_dma;
> + }
> +
> + if (of_property_read_bool(pdev->dev.of_node, "dma-33bits")) {
> + dev_info(&pdev->dev, "Support dma 33bits\n");
Drop this, a bit verbose.
> + mtkd->support_33bits = true;
> + }
> +
> + rc = dma_set_mask_and_coherent(&pdev->dev,
> + DMA_BIT_MASK(32 | mtkd->support_33bits));
> + if (rc)
> + goto err_no_dma;
> +
> + dma_cap_set(DMA_SLAVE, mtkd->ddev.cap_mask);
> + mtkd->ddev.device_alloc_chan_resources =
> + mtk_uart_apdma_alloc_chan_resources;
> + mtkd->ddev.device_free_chan_resources =
> + mtk_uart_apdma_free_chan_resources;
> + mtkd->ddev.device_tx_status = mtk_uart_apdma_tx_status;
> + mtkd->ddev.device_issue_pending = mtk_uart_apdma_issue_pending;
> + mtkd->ddev.device_prep_slave_sg = mtk_uart_apdma_prep_slave_sg;
> + mtkd->ddev.device_config = mtk_uart_apdma_slave_config;
> + mtkd->ddev.device_pause = mtk_uart_apdma_device_pause;
> + mtkd->ddev.device_resume = mtk_uart_apdma_device_resume;
> + mtkd->ddev.device_terminate_all = mtk_uart_apdma_terminate_all;
> + mtkd->ddev.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE);
> + mtkd->ddev.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE);
> + mtkd->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
> + mtkd->ddev.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
> + mtkd->ddev.dev = &pdev->dev;
> + INIT_LIST_HEAD(&mtkd->ddev.channels);
> +
> + for (i = 0; i < MTK_UART_APDMA_CHANNELS; i++) {
> + c = devm_kzalloc(mtkd->ddev.dev, sizeof(*c), GFP_KERNEL);
> + if (!c) {
> + rc = -ENODEV;
> + goto err_no_dma;
> + }
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, i);
> + if (!res) {
> + rc = -ENODEV;
> + goto err_no_dma;
> + }
> +
> + c->base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(c->base)) {
> + rc = PTR_ERR(c->base);
> + goto err_no_dma;
> + }
> + c->requested = false;
> + c->vc.desc_free = mtk_uart_apdma_desc_free;
> + vchan_init(&c->vc, &mtkd->ddev);
> +
> + mtkd->dma_irq[i] = platform_get_irq(pdev, i);
> + if ((int)mtkd->dma_irq[i] < 0) {
> + dev_err(&pdev->dev, "failed to get IRQ[%d]\n", i);
> + rc = -EINVAL;
> + goto err_no_dma;
> + }
> + }
> +
> + pm_runtime_enable(&pdev->dev);
> + pm_runtime_set_active(&pdev->dev);
> +
> + rc = dma_async_device_register(&mtkd->ddev);
> + if (rc)
> + goto rpm_disable;
> +
> + platform_set_drvdata(pdev, mtkd);
> +
> + if (pdev->dev.of_node) {
> + /* Device-tree DMA controller registration */
> + rc = of_dma_controller_register(pdev->dev.of_node,
> + of_dma_xlate_by_chan_id,
> + mtkd);
> + if (rc)
> + goto dma_remove;
> + }
> +
> + return rc;
> +
> +dma_remove:
> + dma_async_device_unregister(&mtkd->ddev);
> +rpm_disable:
> + pm_runtime_disable(&pdev->dev);
> +err_no_dma:
> + mtk_uart_apdma_free(mtkd);
> + return rc;
> +}
> +
> +static int mtk_uart_apdma_remove(struct platform_device *pdev)
> +{
> + struct mtk_uart_apdmadev *mtkd = platform_get_drvdata(pdev);
> +
> + if (pdev->dev.of_node)
> + of_dma_controller_free(pdev->dev.of_node);
> +
> + pm_runtime_disable(&pdev->dev);
> + pm_runtime_put_noidle(&pdev->dev);
> +
> + dma_async_device_unregister(&mtkd->ddev);
> + mtk_uart_apdma_free(mtkd);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int mtk_uart_apdma_suspend(struct device *dev)
> +{
> + struct mtk_uart_apdmadev *mtkd = dev_get_drvdata(dev);
> +
> + if (!pm_runtime_suspended(dev))
> + clk_disable_unprepare(mtkd->clk);
> +
> + return 0;
> +}
> +
> +static int mtk_uart_apdma_resume(struct device *dev)
> +{
> + int ret;
> + struct mtk_uart_apdmadev *mtkd = dev_get_drvdata(dev);
> +
> + if (!pm_runtime_suspended(dev)) {
> + ret = clk_prepare_enable(mtkd->clk);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +#endif /* CONFIG_PM_SLEEP */
> +
> +#ifdef CONFIG_PM
> +static int mtk_uart_apdma_runtime_suspend(struct device *dev)
> +{
> + struct mtk_uart_apdmadev *mtkd = dev_get_drvdata(dev);
> +
> + clk_disable_unprepare(mtkd->clk);
> +
> + return 0;
> +}
> +
> +static int mtk_uart_apdma_runtime_resume(struct device *dev)
> +{
> + int ret;
> + struct mtk_uart_apdmadev *mtkd = dev_get_drvdata(dev);
> +
> + ret = clk_prepare_enable(mtkd->clk);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +#endif /* CONFIG_PM */
> +
> +static const struct dev_pm_ops mtk_uart_apdma_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(mtk_uart_apdma_suspend, mtk_uart_apdma_resume)
> + SET_RUNTIME_PM_OPS(mtk_uart_apdma_runtime_suspend,
> + mtk_uart_apdma_runtime_resume, NULL)
> +};
> +
> +static struct platform_driver mtk_uart_apdma_driver = {
> + .probe = mtk_uart_apdma_probe,
> + .remove = mtk_uart_apdma_remove,
> + .driver = {
> + .name = KBUILD_MODNAME,
> + .pm = &mtk_uart_apdma_pm_ops,
> + .of_match_table = of_match_ptr(mtk_uart_apdma_match),
> + },
> +};
> +
> +module_platform_driver(mtk_uart_apdma_driver);
> +
> +MODULE_DESCRIPTION("MediaTek UART APDMA Controller Driver");
> +MODULE_AUTHOR("Long Cheng <long.cheng@...iatek.com>");
> +MODULE_LICENSE("GPL v2");
> +
> diff --git a/drivers/dma/mediatek/Kconfig b/drivers/dma/mediatek/Kconfig
> index 27bac0b..1a523c87 100644
> --- a/drivers/dma/mediatek/Kconfig
> +++ b/drivers/dma/mediatek/Kconfig
> @@ -1,4 +1,15 @@
>
> +config DMA_MTK_UART
> + tristate "MediaTek SoCs APDMA support for UART"
> + depends on OF && SERIAL_8250_MT6577
> + select DMA_ENGINE
> + select DMA_VIRTUAL_CHANNELS
> + help
> + Support for the UART DMA engine found on MediaTek MTK SoCs.
> + when SERIAL_8250_MT6577 is enabled, and if you want to use DMA,
> + you can enable the config. the DMA engine can only be used
> + with MediaTek SoCs.
> +
> config MTK_HSDMA
> tristate "MediaTek High-Speed DMA controller support"
> depends on ARCH_MEDIATEK || COMPILE_TEST
> diff --git a/drivers/dma/mediatek/Makefile b/drivers/dma/mediatek/Makefile
> index 6e778f8..2f2efd9 100644
> --- a/drivers/dma/mediatek/Makefile
> +++ b/drivers/dma/mediatek/Makefile
> @@ -1 +1,2 @@
> +obj-$(CONFIG_DMA_MTK_UART) += 8250_mtk_dma.o
> obj-$(CONFIG_MTK_HSDMA) += mtk-hsdma.o
> --
> 1.7.9.5
>
Powered by blists - more mailing lists