| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20181227151311.20107-3-ludovic.desroches@microchip.com>
Date: Thu, 27 Dec 2018 16:13:10 +0100
From: Ludovic Desroches <ludovic.desroches@...rochip.com>
To: <linux-i2c@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>
CC: <me@....yt>, <nicolas.ferre@...rochip.com>,
<alexandre.belloni@...tlin.com>, <linux-kernel@...r.kernel.org>,
<wsa@...-dreams.de>, <andriy.shevchenko@...ux.intel.com>,
Ludovic Desroches <ludovic.desroches@...rochip.com>
Subject: [PATCH v4 2/3] i2c: at91: split driver into core and master file
From: Juergen Fitschen <me@....yt>
The single file i2c-at91.c has been split into core code (i2c-at91-core.c)
and master mode specific code (i2c-at91-master.c). This should enhance
maintainability and reduce ifdeffery for slave mode related code.
The code itself hasn't been touched. Shared functions only had to be made
non-static. Furthermore, includes have been cleaned up.
Signed-off-by: Juergen Fitschen <me@....yt>
[ludovic.desroches@...rochip.com: fix checkpatch errors]
Signed-off-by: Ludovic Desroches <ludovic.desroches@...rochip.com>
---
MAINTAINERS | 3 +-
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-at91-core.c | 373 ++++++++++++++
.../busses/{i2c-at91.c => i2c-at91-master.c} | 467 +-----------------
drivers/i2c/busses/i2c-at91.h | 151 ++++++
5 files changed, 531 insertions(+), 464 deletions(-)
create mode 100644 drivers/i2c/busses/i2c-at91-core.c
rename drivers/i2c/busses/{i2c-at91.c => i2c-at91-master.c} (67%)
create mode 100644 drivers/i2c/busses/i2c-at91.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 82dc44b09a7e..d61941db6933 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9873,7 +9873,8 @@ MICROCHIP I2C DRIVER
M: Ludovic Desroches <ludovic.desroches@...rochip.com>
L: linux-i2c@...r.kernel.org
S: Supported
-F: drivers/i2c/busses/i2c-at91.c
+F: drivers/i2c/busses/i2c-at91.h
+F: drivers/i2c/busses/i2c-at91-*.c
MICROCHIP ISC DRIVER
M: Eugen Hristev <eugen.hristev@...rochip.com>
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 5f0cb6915969..ea75a777940e 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o
obj-$(CONFIG_I2C_ALTERA) += i2c-altera.o
obj-$(CONFIG_I2C_ASPEED) += i2c-aspeed.o
obj-$(CONFIG_I2C_AT91) += i2c-at91.o
+i2c-at91-objs := i2c-at91-core.o i2c-at91-master.o
obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
obj-$(CONFIG_I2C_AXXIA) += i2c-axxia.o
obj-$(CONFIG_I2C_BCM2835) += i2c-bcm2835.o
diff --git a/drivers/i2c/busses/i2c-at91-core.c b/drivers/i2c/busses/i2c-at91-core.c
new file mode 100644
index 000000000000..5d9c6c81e6ab
--- /dev/null
+++ b/drivers/i2c/busses/i2c-at91-core.c
@@ -0,0 +1,373 @@
+/*
+ * i2c Support for Atmel's AT91 Two-Wire Interface (TWI)
+ *
+ * Copyright (C) 2011 Weinmann Medical GmbH
+ * Author: Nikolaus Voss <n.voss@...nmann.de>
+ *
+ * Evolved from original work by:
+ * Copyright (C) 2004 Rick Bronson
+ * Converted to 2.6 by Andrew Victor <andrew@...people.com>
+ *
+ * Borrowed heavily from original work by:
+ * Copyright (C) 2000 Philip Edelbrock <phil@...mpy.netroedge.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/pinctrl/consumer.h>
+
+#include "i2c-at91.h"
+
+unsigned at91_twi_read(struct at91_twi_dev *dev, unsigned reg)
+{
+ return readl_relaxed(dev->base + reg);
+}
+
+void at91_twi_write(struct at91_twi_dev *dev, unsigned reg, unsigned val)
+{
+ writel_relaxed(val, dev->base + reg);
+}
+
+void at91_disable_twi_interrupts(struct at91_twi_dev *dev)
+{
+ at91_twi_write(dev, AT91_TWI_IDR, AT91_TWI_INT_MASK);
+}
+
+void at91_twi_irq_save(struct at91_twi_dev *dev)
+{
+ dev->imr = at91_twi_read(dev, AT91_TWI_IMR) & AT91_TWI_INT_MASK;
+ at91_disable_twi_interrupts(dev);
+}
+
+void at91_twi_irq_restore(struct at91_twi_dev *dev)
+{
+ at91_twi_write(dev, AT91_TWI_IER, dev->imr);
+}
+
+void at91_init_twi_bus(struct at91_twi_dev *dev)
+{
+ at91_disable_twi_interrupts(dev);
+ at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_SWRST);
+
+ at91_init_twi_bus_master(dev);
+}
+
+static struct at91_twi_pdata at91rm9200_config = {
+ .clk_max_div = 5,
+ .clk_offset = 3,
+ .has_unre_flag = true,
+ .has_alt_cmd = false,
+ .has_hold_field = false,
+};
+
+static struct at91_twi_pdata at91sam9261_config = {
+ .clk_max_div = 5,
+ .clk_offset = 4,
+ .has_unre_flag = false,
+ .has_alt_cmd = false,
+ .has_hold_field = false,
+};
+
+static struct at91_twi_pdata at91sam9260_config = {
+ .clk_max_div = 7,
+ .clk_offset = 4,
+ .has_unre_flag = false,
+ .has_alt_cmd = false,
+ .has_hold_field = false,
+};
+
+static struct at91_twi_pdata at91sam9g20_config = {
+ .clk_max_div = 7,
+ .clk_offset = 4,
+ .has_unre_flag = false,
+ .has_alt_cmd = false,
+ .has_hold_field = false,
+};
+
+static struct at91_twi_pdata at91sam9g10_config = {
+ .clk_max_div = 7,
+ .clk_offset = 4,
+ .has_unre_flag = false,
+ .has_alt_cmd = false,
+ .has_hold_field = false,
+};
+
+static const struct platform_device_id at91_twi_devtypes[] = {
+ {
+ .name = "i2c-at91rm9200",
+ .driver_data = (unsigned long) &at91rm9200_config,
+ }, {
+ .name = "i2c-at91sam9261",
+ .driver_data = (unsigned long) &at91sam9261_config,
+ }, {
+ .name = "i2c-at91sam9260",
+ .driver_data = (unsigned long) &at91sam9260_config,
+ }, {
+ .name = "i2c-at91sam9g20",
+ .driver_data = (unsigned long) &at91sam9g20_config,
+ }, {
+ .name = "i2c-at91sam9g10",
+ .driver_data = (unsigned long) &at91sam9g10_config,
+ }, {
+ /* sentinel */
+ }
+};
+
+#if defined(CONFIG_OF)
+static struct at91_twi_pdata at91sam9x5_config = {
+ .clk_max_div = 7,
+ .clk_offset = 4,
+ .has_unre_flag = false,
+ .has_alt_cmd = false,
+ .has_hold_field = false,
+};
+
+static struct at91_twi_pdata sama5d4_config = {
+ .clk_max_div = 7,
+ .clk_offset = 4,
+ .has_unre_flag = false,
+ .has_alt_cmd = false,
+ .has_hold_field = true,
+};
+
+static struct at91_twi_pdata sama5d2_config = {
+ .clk_max_div = 7,
+ .clk_offset = 4,
+ .has_unre_flag = true,
+ .has_alt_cmd = true,
+ .has_hold_field = true,
+};
+
+static const struct of_device_id atmel_twi_dt_ids[] = {
+ {
+ .compatible = "atmel,at91rm9200-i2c",
+ .data = &at91rm9200_config,
+ }, {
+ .compatible = "atmel,at91sam9260-i2c",
+ .data = &at91sam9260_config,
+ }, {
+ .compatible = "atmel,at91sam9261-i2c",
+ .data = &at91sam9261_config,
+ }, {
+ .compatible = "atmel,at91sam9g20-i2c",
+ .data = &at91sam9g20_config,
+ }, {
+ .compatible = "atmel,at91sam9g10-i2c",
+ .data = &at91sam9g10_config,
+ }, {
+ .compatible = "atmel,at91sam9x5-i2c",
+ .data = &at91sam9x5_config,
+ }, {
+ .compatible = "atmel,sama5d4-i2c",
+ .data = &sama5d4_config,
+ }, {
+ .compatible = "atmel,sama5d2-i2c",
+ .data = &sama5d2_config,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(of, atmel_twi_dt_ids);
+#endif
+
+static struct at91_twi_pdata *at91_twi_get_driver_data(
+ struct platform_device *pdev)
+{
+ if (pdev->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_node(atmel_twi_dt_ids, pdev->dev.of_node);
+ if (!match)
+ return NULL;
+ return (struct at91_twi_pdata *)match->data;
+ }
+ return (struct at91_twi_pdata *) platform_get_device_id(pdev)->driver_data;
+}
+
+static int at91_twi_probe(struct platform_device *pdev)
+{
+ struct at91_twi_dev *dev;
+ struct resource *mem;
+ int rc;
+ u32 phy_addr;
+
+ dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+
+ dev->dev = &pdev->dev;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem)
+ return -ENODEV;
+ phy_addr = mem->start;
+
+ dev->pdata = at91_twi_get_driver_data(pdev);
+ if (!dev->pdata)
+ return -ENODEV;
+
+ dev->base = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(dev->base))
+ return PTR_ERR(dev->base);
+
+ dev->irq = platform_get_irq(pdev, 0);
+ if (dev->irq < 0)
+ return dev->irq;
+
+ platform_set_drvdata(pdev, dev);
+
+ dev->clk = devm_clk_get(dev->dev, NULL);
+ if (IS_ERR(dev->clk)) {
+ dev_err(dev->dev, "no clock defined\n");
+ return -ENODEV;
+ }
+ clk_prepare_enable(dev->clk);
+
+ snprintf(dev->adapter.name, sizeof(dev->adapter.name), "AT91");
+ i2c_set_adapdata(&dev->adapter, dev);
+ dev->adapter.owner = THIS_MODULE;
+ dev->adapter.class = I2C_CLASS_DEPRECATED;
+ dev->adapter.dev.parent = dev->dev;
+ dev->adapter.nr = pdev->id;
+ dev->adapter.timeout = AT91_I2C_TIMEOUT;
+ dev->adapter.dev.of_node = pdev->dev.of_node;
+
+ rc = at91_twi_probe_master(pdev, phy_addr, dev);
+ if (rc)
+ return rc;
+
+ at91_init_twi_bus(dev);
+
+ pm_runtime_set_autosuspend_delay(dev->dev, AUTOSUSPEND_TIMEOUT);
+ pm_runtime_use_autosuspend(dev->dev);
+ pm_runtime_set_active(dev->dev);
+ pm_runtime_enable(dev->dev);
+
+ rc = i2c_add_numbered_adapter(&dev->adapter);
+ if (rc) {
+ clk_disable_unprepare(dev->clk);
+
+ pm_runtime_disable(dev->dev);
+ pm_runtime_set_suspended(dev->dev);
+
+ return rc;
+ }
+
+ dev_info(dev->dev, "AT91 i2c bus driver (hw version: %#x).\n",
+ at91_twi_read(dev, AT91_TWI_VER));
+ return 0;
+}
+
+static int at91_twi_remove(struct platform_device *pdev)
+{
+ struct at91_twi_dev *dev = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(&dev->adapter);
+ clk_disable_unprepare(dev->clk);
+
+ pm_runtime_disable(dev->dev);
+ pm_runtime_set_suspended(dev->dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int at91_twi_runtime_suspend(struct device *dev)
+{
+ struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(twi_dev->clk);
+
+ pinctrl_pm_select_sleep_state(dev);
+
+ return 0;
+}
+
+static int at91_twi_runtime_resume(struct device *dev)
+{
+ struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
+
+ pinctrl_pm_select_default_state(dev);
+
+ return clk_prepare_enable(twi_dev->clk);
+}
+
+static int at91_twi_suspend_noirq(struct device *dev)
+{
+ if (!pm_runtime_status_suspended(dev))
+ at91_twi_runtime_suspend(dev);
+
+ return 0;
+}
+
+static int at91_twi_resume_noirq(struct device *dev)
+{
+ struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
+ int ret;
+
+ if (!pm_runtime_status_suspended(dev)) {
+ ret = at91_twi_runtime_resume(dev);
+ if (ret)
+ return ret;
+ }
+
+ pm_runtime_mark_last_busy(dev);
+ pm_request_autosuspend(dev);
+
+ at91_init_twi_bus(twi_dev);
+
+ return 0;
+}
+
+static const struct dev_pm_ops at91_twi_pm = {
+ .suspend_noirq = at91_twi_suspend_noirq,
+ .resume_noirq = at91_twi_resume_noirq,
+ .runtime_suspend = at91_twi_runtime_suspend,
+ .runtime_resume = at91_twi_runtime_resume,
+};
+
+#define at91_twi_pm_ops (&at91_twi_pm)
+#else
+#define at91_twi_pm_ops NULL
+#endif
+
+static struct platform_driver at91_twi_driver = {
+ .probe = at91_twi_probe,
+ .remove = at91_twi_remove,
+ .id_table = at91_twi_devtypes,
+ .driver = {
+ .name = "at91_i2c",
+ .of_match_table = of_match_ptr(atmel_twi_dt_ids),
+ .pm = at91_twi_pm_ops,
+ },
+};
+
+static int __init at91_twi_init(void)
+{
+ return platform_driver_register(&at91_twi_driver);
+}
+
+static void __exit at91_twi_exit(void)
+{
+ platform_driver_unregister(&at91_twi_driver);
+}
+
+subsys_initcall(at91_twi_init);
+module_exit(at91_twi_exit);
+
+MODULE_AUTHOR("Nikolaus Voss <n.voss@...nmann.de>");
+MODULE_DESCRIPTION("I2C (TWI) driver for Atmel AT91");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at91_i2c");
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91-master.c
similarity index 67%
rename from drivers/i2c/busses/i2c-at91.c
rename to drivers/i2c/busses/i2c-at91-master.c
index bc74184462c6..4ef335f95506 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91-master.c
@@ -25,156 +25,15 @@
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/io.h>
-#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
-#include <linux/slab.h>
#include <linux/platform_data/dma-atmel.h>
#include <linux/pm_runtime.h>
-#include <linux/pinctrl/consumer.h>
-
-#define DEFAULT_TWI_CLK_HZ 100000 /* max 400 Kbits/s */
-#define AT91_I2C_TIMEOUT msecs_to_jiffies(100) /* transfer timeout */
-#define AT91_I2C_DMA_THRESHOLD 8 /* enable DMA if transfer size is bigger than this threshold */
-#define AUTOSUSPEND_TIMEOUT 2000
-#define AT91_I2C_MAX_ALT_CMD_DATA_SIZE 256
-
-/* AT91 TWI register definitions */
-#define AT91_TWI_CR 0x0000 /* Control Register */
-#define AT91_TWI_START BIT(0) /* Send a Start Condition */
-#define AT91_TWI_STOP BIT(1) /* Send a Stop Condition */
-#define AT91_TWI_MSEN BIT(2) /* Master Transfer Enable */
-#define AT91_TWI_MSDIS BIT(3) /* Master Transfer Disable */
-#define AT91_TWI_SVEN BIT(4) /* Slave Transfer Enable */
-#define AT91_TWI_SVDIS BIT(5) /* Slave Transfer Disable */
-#define AT91_TWI_QUICK BIT(6) /* SMBus quick command */
-#define AT91_TWI_SWRST BIT(7) /* Software Reset */
-#define AT91_TWI_ACMEN BIT(16) /* Alternative Command Mode Enable */
-#define AT91_TWI_ACMDIS BIT(17) /* Alternative Command Mode Disable */
-#define AT91_TWI_THRCLR BIT(24) /* Transmit Holding Register Clear */
-#define AT91_TWI_RHRCLR BIT(25) /* Receive Holding Register Clear */
-#define AT91_TWI_LOCKCLR BIT(26) /* Lock Clear */
-#define AT91_TWI_FIFOEN BIT(28) /* FIFO Enable */
-#define AT91_TWI_FIFODIS BIT(29) /* FIFO Disable */
-
-#define AT91_TWI_MMR 0x0004 /* Master Mode Register */
-#define AT91_TWI_IADRSZ_1 0x0100 /* Internal Device Address Size */
-#define AT91_TWI_MREAD BIT(12) /* Master Read Direction */
-
-#define AT91_TWI_IADR 0x000c /* Internal Address Register */
-
-#define AT91_TWI_CWGR 0x0010 /* Clock Waveform Generator Reg */
-#define AT91_TWI_CWGR_HOLD_MAX 0x1f
-#define AT91_TWI_CWGR_HOLD(x) (((x) & AT91_TWI_CWGR_HOLD_MAX) << 24)
-
-#define AT91_TWI_SR 0x0020 /* Status Register */
-#define AT91_TWI_TXCOMP BIT(0) /* Transmission Complete */
-#define AT91_TWI_RXRDY BIT(1) /* Receive Holding Register Ready */
-#define AT91_TWI_TXRDY BIT(2) /* Transmit Holding Register Ready */
-#define AT91_TWI_OVRE BIT(6) /* Overrun Error */
-#define AT91_TWI_UNRE BIT(7) /* Underrun Error */
-#define AT91_TWI_NACK BIT(8) /* Not Acknowledged */
-#define AT91_TWI_LOCK BIT(23) /* TWI Lock due to Frame Errors */
-
-#define AT91_TWI_INT_MASK \
- (AT91_TWI_TXCOMP | AT91_TWI_RXRDY | AT91_TWI_TXRDY | AT91_TWI_NACK)
-
-#define AT91_TWI_IER 0x0024 /* Interrupt Enable Register */
-#define AT91_TWI_IDR 0x0028 /* Interrupt Disable Register */
-#define AT91_TWI_IMR 0x002c /* Interrupt Mask Register */
-#define AT91_TWI_RHR 0x0030 /* Receive Holding Register */
-#define AT91_TWI_THR 0x0034 /* Transmit Holding Register */
-
-#define AT91_TWI_ACR 0x0040 /* Alternative Command Register */
-#define AT91_TWI_ACR_DATAL(len) ((len) & 0xff)
-#define AT91_TWI_ACR_DIR BIT(8)
-
-#define AT91_TWI_FMR 0x0050 /* FIFO Mode Register */
-#define AT91_TWI_FMR_TXRDYM(mode) (((mode) & 0x3) << 0)
-#define AT91_TWI_FMR_TXRDYM_MASK (0x3 << 0)
-#define AT91_TWI_FMR_RXRDYM(mode) (((mode) & 0x3) << 4)
-#define AT91_TWI_FMR_RXRDYM_MASK (0x3 << 4)
-#define AT91_TWI_ONE_DATA 0x0
-#define AT91_TWI_TWO_DATA 0x1
-#define AT91_TWI_FOUR_DATA 0x2
-
-#define AT91_TWI_FLR 0x0054 /* FIFO Level Register */
-
-#define AT91_TWI_FSR 0x0060 /* FIFO Status Register */
-#define AT91_TWI_FIER 0x0064 /* FIFO Interrupt Enable Register */
-#define AT91_TWI_FIDR 0x0068 /* FIFO Interrupt Disable Register */
-#define AT91_TWI_FIMR 0x006c /* FIFO Interrupt Mask Register */
-
-#define AT91_TWI_VER 0x00fc /* Version Register */
-
-struct at91_twi_pdata {
- unsigned clk_max_div;
- unsigned clk_offset;
- bool has_unre_flag;
- bool has_alt_cmd;
- bool has_hold_field;
- struct at_dma_slave dma_slave;
-};
-
-struct at91_twi_dma {
- struct dma_chan *chan_rx;
- struct dma_chan *chan_tx;
- struct scatterlist sg[2];
- struct dma_async_tx_descriptor *data_desc;
- enum dma_data_direction direction;
- bool buf_mapped;
- bool xfer_in_progress;
-};
-
-struct at91_twi_dev {
- struct device *dev;
- void __iomem *base;
- struct completion cmd_complete;
- struct clk *clk;
- u8 *buf;
- size_t buf_len;
- struct i2c_msg *msg;
- int irq;
- unsigned imr;
- unsigned transfer_status;
- struct i2c_adapter adapter;
- unsigned twi_cwgr_reg;
- struct at91_twi_pdata *pdata;
- bool use_dma;
- bool use_alt_cmd;
- bool recv_len_abort;
- u32 fifo_size;
- struct at91_twi_dma dma;
-};
-
-static unsigned at91_twi_read(struct at91_twi_dev *dev, unsigned reg)
-{
- return readl_relaxed(dev->base + reg);
-}
-
-static void at91_twi_write(struct at91_twi_dev *dev, unsigned reg, unsigned val)
-{
- writel_relaxed(val, dev->base + reg);
-}
-
-static void at91_disable_twi_interrupts(struct at91_twi_dev *dev)
-{
- at91_twi_write(dev, AT91_TWI_IDR, AT91_TWI_INT_MASK);
-}
-
-static void at91_twi_irq_save(struct at91_twi_dev *dev)
-{
- dev->imr = at91_twi_read(dev, AT91_TWI_IMR) & AT91_TWI_INT_MASK;
- at91_disable_twi_interrupts(dev);
-}
-static void at91_twi_irq_restore(struct at91_twi_dev *dev)
-{
- at91_twi_write(dev, AT91_TWI_IER, dev->imr);
-}
+#include "i2c-at91.h"
-static void at91_init_twi_bus_master(struct at91_twi_dev *dev)
+void at91_init_twi_bus_master(struct at91_twi_dev *dev)
{
/* FIFO should be enabled immediately after the software reset */
if (dev->fifo_size)
@@ -184,14 +43,6 @@ static void at91_init_twi_bus_master(struct at91_twi_dev *dev)
at91_twi_write(dev, AT91_TWI_CWGR, dev->twi_cwgr_reg);
}
-static void at91_init_twi_bus(struct at91_twi_dev *dev)
-{
- at91_disable_twi_interrupts(dev);
- at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_SWRST);
-
- at91_init_twi_bus_master(dev);
-}
-
/*
* Calculate symmetric clock as stated in datasheet:
* twi_clk = F_MAIN / (2 * (cdiv * (1 << ckdiv) + offset))
@@ -839,124 +690,6 @@ static const struct i2c_algorithm at91_twi_algorithm = {
.functionality = at91_twi_func,
};
-static struct at91_twi_pdata at91rm9200_config = {
- .clk_max_div = 5,
- .clk_offset = 3,
- .has_unre_flag = true,
- .has_alt_cmd = false,
- .has_hold_field = false,
-};
-
-static struct at91_twi_pdata at91sam9261_config = {
- .clk_max_div = 5,
- .clk_offset = 4,
- .has_unre_flag = false,
- .has_alt_cmd = false,
- .has_hold_field = false,
-};
-
-static struct at91_twi_pdata at91sam9260_config = {
- .clk_max_div = 7,
- .clk_offset = 4,
- .has_unre_flag = false,
- .has_alt_cmd = false,
- .has_hold_field = false,
-};
-
-static struct at91_twi_pdata at91sam9g20_config = {
- .clk_max_div = 7,
- .clk_offset = 4,
- .has_unre_flag = false,
- .has_alt_cmd = false,
- .has_hold_field = false,
-};
-
-static struct at91_twi_pdata at91sam9g10_config = {
- .clk_max_div = 7,
- .clk_offset = 4,
- .has_unre_flag = false,
- .has_alt_cmd = false,
- .has_hold_field = false,
-};
-
-static const struct platform_device_id at91_twi_devtypes[] = {
- {
- .name = "i2c-at91rm9200",
- .driver_data = (unsigned long) &at91rm9200_config,
- }, {
- .name = "i2c-at91sam9261",
- .driver_data = (unsigned long) &at91sam9261_config,
- }, {
- .name = "i2c-at91sam9260",
- .driver_data = (unsigned long) &at91sam9260_config,
- }, {
- .name = "i2c-at91sam9g20",
- .driver_data = (unsigned long) &at91sam9g20_config,
- }, {
- .name = "i2c-at91sam9g10",
- .driver_data = (unsigned long) &at91sam9g10_config,
- }, {
- /* sentinel */
- }
-};
-
-#if defined(CONFIG_OF)
-static struct at91_twi_pdata at91sam9x5_config = {
- .clk_max_div = 7,
- .clk_offset = 4,
- .has_unre_flag = false,
- .has_alt_cmd = false,
- .has_hold_field = false,
-};
-
-static struct at91_twi_pdata sama5d4_config = {
- .clk_max_div = 7,
- .clk_offset = 4,
- .has_unre_flag = false,
- .has_alt_cmd = false,
- .has_hold_field = true,
-};
-
-static struct at91_twi_pdata sama5d2_config = {
- .clk_max_div = 7,
- .clk_offset = 4,
- .has_unre_flag = true,
- .has_alt_cmd = true,
- .has_hold_field = true,
-};
-
-static const struct of_device_id atmel_twi_dt_ids[] = {
- {
- .compatible = "atmel,at91rm9200-i2c",
- .data = &at91rm9200_config,
- } , {
- .compatible = "atmel,at91sam9260-i2c",
- .data = &at91sam9260_config,
- } , {
- .compatible = "atmel,at91sam9261-i2c",
- .data = &at91sam9261_config,
- } , {
- .compatible = "atmel,at91sam9g20-i2c",
- .data = &at91sam9g20_config,
- } , {
- .compatible = "atmel,at91sam9g10-i2c",
- .data = &at91sam9g10_config,
- }, {
- .compatible = "atmel,at91sam9x5-i2c",
- .data = &at91sam9x5_config,
- }, {
- .compatible = "atmel,sama5d4-i2c",
- .data = &sama5d4_config,
- }, {
- .compatible = "atmel,sama5d2-i2c",
- .data = &sama5d2_config,
- }, {
- /* sentinel */
- }
-};
-MODULE_DEVICE_TABLE(of, atmel_twi_dt_ids);
-#endif
-
static int at91_twi_configure_dma(struct at91_twi_dev *dev, u32 phy_addr)
{
int ret = 0;
@@ -1039,21 +772,8 @@ static int at91_twi_configure_dma(struct at91_twi_dev *dev, u32 phy_addr)
return ret;
}
-static struct at91_twi_pdata *at91_twi_get_driver_data(
- struct platform_device *pdev)
-{
- if (pdev->dev.of_node) {
- const struct of_device_id *match;
- match = of_match_node(atmel_twi_dt_ids, pdev->dev.of_node);
- if (!match)
- return NULL;
- return (struct at91_twi_pdata *)match->data;
- }
- return (struct at91_twi_pdata *) platform_get_device_id(pdev)->driver_data;
-}
-
-static int at91_twi_probe_master(struct platform_device *pdev,
- u32 phy_addr, struct at91_twi_dev *dev)
+int at91_twi_probe_master(struct platform_device *pdev,
+ u32 phy_addr, struct at91_twi_dev *dev)
{
int rc;
u32 bus_clk_rate;
@@ -1090,182 +810,3 @@ static int at91_twi_probe_master(struct platform_device *pdev,
return 0;
}
-
-static int at91_twi_probe(struct platform_device *pdev)
-{
- struct at91_twi_dev *dev;
- struct resource *mem;
- int rc;
- u32 phy_addr;
-
- dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
- if (!dev)
- return -ENOMEM;
-
- dev->dev = &pdev->dev;
-
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!mem)
- return -ENODEV;
- phy_addr = mem->start;
-
- dev->pdata = at91_twi_get_driver_data(pdev);
- if (!dev->pdata)
- return -ENODEV;
-
- dev->base = devm_ioremap_resource(&pdev->dev, mem);
- if (IS_ERR(dev->base))
- return PTR_ERR(dev->base);
-
- dev->irq = platform_get_irq(pdev, 0);
- if (dev->irq < 0)
- return dev->irq;
-
- platform_set_drvdata(pdev, dev);
-
- dev->clk = devm_clk_get(dev->dev, NULL);
- if (IS_ERR(dev->clk)) {
- dev_err(dev->dev, "no clock defined\n");
- return -ENODEV;
- }
- rc = clk_prepare_enable(dev->clk);
- if (rc)
- return rc;
-
- snprintf(dev->adapter.name, sizeof(dev->adapter.name), "AT91");
- i2c_set_adapdata(&dev->adapter, dev);
- dev->adapter.owner = THIS_MODULE;
- dev->adapter.class = I2C_CLASS_DEPRECATED;
- dev->adapter.dev.parent = dev->dev;
- dev->adapter.nr = pdev->id;
- dev->adapter.timeout = AT91_I2C_TIMEOUT;
- dev->adapter.dev.of_node = pdev->dev.of_node;
-
- rc = at91_twi_probe_master(pdev, phy_addr, dev);
- if (rc)
- return rc;
-
- at91_init_twi_bus(dev);
-
- pm_runtime_set_autosuspend_delay(dev->dev, AUTOSUSPEND_TIMEOUT);
- pm_runtime_use_autosuspend(dev->dev);
- pm_runtime_set_active(dev->dev);
- pm_runtime_enable(dev->dev);
-
- rc = i2c_add_numbered_adapter(&dev->adapter);
- if (rc) {
- clk_disable_unprepare(dev->clk);
-
- pm_runtime_disable(dev->dev);
- pm_runtime_set_suspended(dev->dev);
-
- return rc;
- }
-
- dev_info(dev->dev, "AT91 i2c bus driver (hw version: %#x).\n",
- at91_twi_read(dev, AT91_TWI_VER));
- return 0;
-}
-
-static int at91_twi_remove(struct platform_device *pdev)
-{
- struct at91_twi_dev *dev = platform_get_drvdata(pdev);
-
- i2c_del_adapter(&dev->adapter);
- clk_disable_unprepare(dev->clk);
-
- pm_runtime_disable(dev->dev);
- pm_runtime_set_suspended(dev->dev);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-
-static int at91_twi_runtime_suspend(struct device *dev)
-{
- struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
-
- clk_disable_unprepare(twi_dev->clk);
-
- pinctrl_pm_select_sleep_state(dev);
-
- return 0;
-}
-
-static int at91_twi_runtime_resume(struct device *dev)
-{
- struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
-
- pinctrl_pm_select_default_state(dev);
-
- return clk_prepare_enable(twi_dev->clk);
-}
-
-static int at91_twi_suspend_noirq(struct device *dev)
-{
- if (!pm_runtime_status_suspended(dev))
- at91_twi_runtime_suspend(dev);
-
- return 0;
-}
-
-static int at91_twi_resume_noirq(struct device *dev)
-{
- struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
- int ret;
-
- if (!pm_runtime_status_suspended(dev)) {
- ret = at91_twi_runtime_resume(dev);
- if (ret)
- return ret;
- }
-
- pm_runtime_mark_last_busy(dev);
- pm_request_autosuspend(dev);
-
- at91_init_twi_bus(twi_dev);
-
- return 0;
-}
-
-static const struct dev_pm_ops at91_twi_pm = {
- .suspend_noirq = at91_twi_suspend_noirq,
- .resume_noirq = at91_twi_resume_noirq,
- .runtime_suspend = at91_twi_runtime_suspend,
- .runtime_resume = at91_twi_runtime_resume,
-};
-
-#define at91_twi_pm_ops (&at91_twi_pm)
-#else
-#define at91_twi_pm_ops NULL
-#endif
-
-static struct platform_driver at91_twi_driver = {
- .probe = at91_twi_probe,
- .remove = at91_twi_remove,
- .id_table = at91_twi_devtypes,
- .driver = {
- .name = "at91_i2c",
- .of_match_table = of_match_ptr(atmel_twi_dt_ids),
- .pm = at91_twi_pm_ops,
- },
-};
-
-static int __init at91_twi_init(void)
-{
- return platform_driver_register(&at91_twi_driver);
-}
-
-static void __exit at91_twi_exit(void)
-{
- platform_driver_unregister(&at91_twi_driver);
-}
-
-subsys_initcall(at91_twi_init);
-module_exit(at91_twi_exit);
-
-MODULE_AUTHOR("Nikolaus Voss <n.voss@...nmann.de>");
-MODULE_DESCRIPTION("I2C (TWI) driver for Atmel AT91");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:at91_i2c");
diff --git a/drivers/i2c/busses/i2c-at91.h b/drivers/i2c/busses/i2c-at91.h
new file mode 100644
index 000000000000..555b1674ddbe
--- /dev/null
+++ b/drivers/i2c/busses/i2c-at91.h
@@ -0,0 +1,151 @@
+/*
+ * i2c Support for Atmel's AT91 Two-Wire Interface (TWI)
+ *
+ * Copyright (C) 2011 Weinmann Medical GmbH
+ * Author: Nikolaus Voss <n.voss@...nmann.de>
+ *
+ * Evolved from original work by:
+ * Copyright (C) 2004 Rick Bronson
+ * Converted to 2.6 by Andrew Victor <andrew@...people.com>
+ *
+ * Borrowed heavily from original work by:
+ * Copyright (C) 2000 Philip Edelbrock <phil@...mpy.netroedge.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/dma-atmel.h>
+#include <linux/platform_device.h>
+
+#define DEFAULT_TWI_CLK_HZ 100000 /* max 400 Kbits/s */
+#define AT91_I2C_TIMEOUT msecs_to_jiffies(100) /* transfer timeout */
+#define AT91_I2C_DMA_THRESHOLD 8 /* enable DMA if transfer size is bigger than this threshold */
+#define AUTOSUSPEND_TIMEOUT 2000
+#define AT91_I2C_MAX_ALT_CMD_DATA_SIZE 256
+
+/* AT91 TWI register definitions */
+#define AT91_TWI_CR 0x0000 /* Control Register */
+#define AT91_TWI_START BIT(0) /* Send a Start Condition */
+#define AT91_TWI_STOP BIT(1) /* Send a Stop Condition */
+#define AT91_TWI_MSEN BIT(2) /* Master Transfer Enable */
+#define AT91_TWI_MSDIS BIT(3) /* Master Transfer Disable */
+#define AT91_TWI_SVEN BIT(4) /* Slave Transfer Enable */
+#define AT91_TWI_SVDIS BIT(5) /* Slave Transfer Disable */
+#define AT91_TWI_QUICK BIT(6) /* SMBus quick command */
+#define AT91_TWI_SWRST BIT(7) /* Software Reset */
+#define AT91_TWI_ACMEN BIT(16) /* Alternative Command Mode Enable */
+#define AT91_TWI_ACMDIS BIT(17) /* Alternative Command Mode Disable */
+#define AT91_TWI_THRCLR BIT(24) /* Transmit Holding Register Clear */
+#define AT91_TWI_RHRCLR BIT(25) /* Receive Holding Register Clear */
+#define AT91_TWI_LOCKCLR BIT(26) /* Lock Clear */
+#define AT91_TWI_FIFOEN BIT(28) /* FIFO Enable */
+#define AT91_TWI_FIFODIS BIT(29) /* FIFO Disable */
+
+#define AT91_TWI_MMR 0x0004 /* Master Mode Register */
+#define AT91_TWI_IADRSZ_1 0x0100 /* Internal Device Address Size */
+#define AT91_TWI_MREAD BIT(12) /* Master Read Direction */
+
+#define AT91_TWI_IADR 0x000c /* Internal Address Register */
+
+#define AT91_TWI_CWGR 0x0010 /* Clock Waveform Generator Reg */
+#define AT91_TWI_CWGR_HOLD_MAX 0x1f
+#define AT91_TWI_CWGR_HOLD(x) (((x) & AT91_TWI_CWGR_HOLD_MAX) << 24)
+
+#define AT91_TWI_SR 0x0020 /* Status Register */
+#define AT91_TWI_TXCOMP BIT(0) /* Transmission Complete */
+#define AT91_TWI_RXRDY BIT(1) /* Receive Holding Register Ready */
+#define AT91_TWI_TXRDY BIT(2) /* Transmit Holding Register Ready */
+#define AT91_TWI_OVRE BIT(6) /* Overrun Error */
+#define AT91_TWI_UNRE BIT(7) /* Underrun Error */
+#define AT91_TWI_NACK BIT(8) /* Not Acknowledged */
+#define AT91_TWI_LOCK BIT(23) /* TWI Lock due to Frame Errors */
+
+#define AT91_TWI_INT_MASK \
+ (AT91_TWI_TXCOMP | AT91_TWI_RXRDY | AT91_TWI_TXRDY | AT91_TWI_NACK)
+
+#define AT91_TWI_IER 0x0024 /* Interrupt Enable Register */
+#define AT91_TWI_IDR 0x0028 /* Interrupt Disable Register */
+#define AT91_TWI_IMR 0x002c /* Interrupt Mask Register */
+#define AT91_TWI_RHR 0x0030 /* Receive Holding Register */
+#define AT91_TWI_THR 0x0034 /* Transmit Holding Register */
+
+#define AT91_TWI_ACR 0x0040 /* Alternative Command Register */
+#define AT91_TWI_ACR_DATAL(len) ((len) & 0xff)
+#define AT91_TWI_ACR_DIR BIT(8)
+
+#define AT91_TWI_FMR 0x0050 /* FIFO Mode Register */
+#define AT91_TWI_FMR_TXRDYM(mode) (((mode) & 0x3) << 0)
+#define AT91_TWI_FMR_TXRDYM_MASK (0x3 << 0)
+#define AT91_TWI_FMR_RXRDYM(mode) (((mode) & 0x3) << 4)
+#define AT91_TWI_FMR_RXRDYM_MASK (0x3 << 4)
+#define AT91_TWI_ONE_DATA 0x0
+#define AT91_TWI_TWO_DATA 0x1
+#define AT91_TWI_FOUR_DATA 0x2
+
+#define AT91_TWI_FLR 0x0054 /* FIFO Level Register */
+
+#define AT91_TWI_FSR 0x0060 /* FIFO Status Register */
+#define AT91_TWI_FIER 0x0064 /* FIFO Interrupt Enable Register */
+#define AT91_TWI_FIDR 0x0068 /* FIFO Interrupt Disable Register */
+#define AT91_TWI_FIMR 0x006c /* FIFO Interrupt Mask Register */
+
+#define AT91_TWI_VER 0x00fc /* Version Register */
+
+struct at91_twi_pdata {
+ unsigned clk_max_div;
+ unsigned clk_offset;
+ bool has_unre_flag;
+ bool has_alt_cmd;
+ bool has_hold_field;
+ struct at_dma_slave dma_slave;
+};
+
+struct at91_twi_dma {
+ struct dma_chan *chan_rx;
+ struct dma_chan *chan_tx;
+ struct scatterlist sg[2];
+ struct dma_async_tx_descriptor *data_desc;
+ enum dma_data_direction direction;
+ bool buf_mapped;
+ bool xfer_in_progress;
+};
+
+struct at91_twi_dev {
+ struct device *dev;
+ void __iomem *base;
+ struct completion cmd_complete;
+ struct clk *clk;
+ u8 *buf;
+ size_t buf_len;
+ struct i2c_msg *msg;
+ int irq;
+ unsigned imr;
+ unsigned transfer_status;
+ struct i2c_adapter adapter;
+ unsigned twi_cwgr_reg;
+ struct at91_twi_pdata *pdata;
+ bool use_dma;
+ bool use_alt_cmd;
+ bool recv_len_abort;
+ u32 fifo_size;
+ struct at91_twi_dma dma;
+};
+
+unsigned at91_twi_read(struct at91_twi_dev *dev, unsigned reg);
+void at91_twi_write(struct at91_twi_dev *dev, unsigned reg, unsigned val);
+void at91_disable_twi_interrupts(struct at91_twi_dev *dev);
+void at91_twi_irq_save(struct at91_twi_dev *dev);
+void at91_twi_irq_restore(struct at91_twi_dev *dev);
+void at91_init_twi_bus(struct at91_twi_dev *dev);
+
+void at91_init_twi_bus_master(struct at91_twi_dev *dev);
+int at91_twi_probe_master(struct platform_device *pdev, u32 phy_addr,
+ struct at91_twi_dev *dev);
--
2.20.1
Powered by blists - more mailing lists