| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20181228153442.GA23402@kroah.com>
Date: Fri, 28 Dec 2018 16:34:42 +0100
From: Greg KH <gregkh@...uxfoundation.org>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: Andrew Morton <akpm@...ux-foundation.org>,
linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org
Subject: [GIT PULL] USB/PHY driver patches for 4.21-rc1
The following changes since commit 177c459b08a34dcf004aa9a4c1f1d8be682ff3af:
Merge tag 'usb-4.20-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb (2018-12-20 07:27:39 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git tags/usb-4.21-rc1
for you to fetch changes up to 4b2c01ad902ec02fa962b233decd2f14be3714ba:
USB: serial: option: add Fibocom NL678 series (2018-12-21 16:47:02 +0100)
----------------------------------------------------------------
USB/PHY patches for 4.21-rc1
Here is the big set of USB and PHY driver patches for 4.21-rc1.
All of the usual bits are in here:
- loads of USB gadget driver updates and additions
- new device ids
- phy driver updates
- xhci reworks and new features
- typec updates
Full details are in the shortlog.
All of these have been in linux-next for a long time with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
----------------------------------------------------------------
Alan Douglas (2):
dt-bindings: phy: Document cadence Sierra PHY bindings
phy: cadence: Add driver for Sierra PHY
Alexander Theissen (2):
usb: appledisplay: Set urb transfer_flags to URB_NO_TRANSFER_DMA_MAP
usb: appledisplay: Remove unnecessary spinlock
Andrzej Pietrasiewicz (1):
usb: gadget: f_fs: Allow scatter-gather buffers
Andy Shevchenko (4):
usb: dwc3: drd: Switch to device property for 'extcon' handling
usb: dwc3: drd: Add support for DR detection through extcon
staging: typec: fusb302: Rename fcs,extcon-name to linux,extcon-name
usb: dwc3: trace: add missing break statement to make compiler happy
Anurag Kumar Vulisha (3):
usb: dwc3: update stream id in depcmd
usb: dwc3: don't issue no-op trb for stream capable endpoints
usb: dwc3: Correct the logic for checking TRB full in __dwc3_prepare_one_trb()
Arnd Bergmann (1):
usb: renesas_usbhs: mark PM functions as __maybe_unused
Artur Petrosyan (2):
usb: dwc2: gadget: Fix WkupAlert interrupt handler.
usb: dwc2: gadget: Accept LPM token when TxFIFO is not empty
Badhri Jagan Sridharan (3):
dt-bindings: connector: Add self-powered property
usb: typec: tcpm: Do not disconnect link for self powered devices
usb: typec: tcpm: charge current handling for sink during hard reset
Bin Liu (2):
usb: musb: dsps: fix otg state machine
usb: musb: dsps: fix runtime pm for peripheral mode
Brian Norris (1):
usb: dwc3: don't log probe deferrals; but do log other error codes
Chengguang Xu (1):
usb: host: remove unnecessary condition check
Christoph Hellwig (1):
USB: remove the unused struct hcd_timeout definition
Chunfeng Yun (10):
usb: mtu3: remove QMU checksum
usb: mtu3: enable hardware remote wakeup from L1 automatically
usb: mtu3: fix the issue about SetFeature(U1/U2_Enable)
usb: mtu3: enable SETUPENDISR interrupt
usb: mtu3: clear SOFTCONN when clear USB3_EN if work as HS mode
usb: mtu3: remove QMU checksum
usb: mtu3: enable hardware remote wakeup from L1 automatically
usb: mtu3: fix the issue about SetFeature(U1/U2_Enable)
usb: mtu3: enable SETUPENDISR interrupt
usb: mtu3: clear SOFTCONN when clear USB3_EN if work as HS mode
Colin Ian King (5):
uwb: clean an indentation issue, remove extraneous tab
USB: gadget: udc: fix spelling mistake "intrerrupt" -> "interrupt"
USB: ene_usb6250: add missing indentation
drivers: usb: early: clean up indentation, remove extraneous tabs
usb: gadget: udc: fix spelling mistake "intrerrupt" -> "interrupt"
Evan Green (4):
dt-bindings: phy-qcom-qmp: Fix register underspecification
phy: qcom-qmp: Utilize fully-specified DT registers
dt-bindings: phy-qcom-qmp: Move #clock-cells to child
phy: qcom-qmp: Expose provided clocks to DT
Fabrizio Castro (1):
usb: renesas_usbhs: add support for RZ/G2E
Felipe Balbi (11):
usb: dwc3: gadget: combine unaligned and zero flags
usb: dwc3: gadget: track number of TRBs per request
usb: dwc3: gadget: use num_trbs when skipping TRBs on ->dequeue()
usb: dwc3: gadget: extract dwc3_gadget_ep_skip_trbs()
usb: dwc3: gadget: introduce cancelled_list
usb: dwc3: gadget: move requests to cancelled_list
usb: dwc3: gadget: remove wait_end_transfer
usb: dwc3: gadget: return errors from __dwc3_gadget_start_isoc()
usb: dwc3: trace: log ep commands in hex
usb: dwc3: gadget: remove unnecessary dev_info()
usb: dwc3: gadget: check if dep->frame_number is still valid
Greg Kroah-Hartman (8):
Merge 4.20-rc4 into usb-next
Merge 4.20-rc5 into usb-next
Merge 4.20-rc6 into usb-next
Merge tag 'phy-for-4.21_v1' of git://git.kernel.org/.../kishon/linux-phy into usb-next
Merge tag 'usb-for-v4.21' of git://git.kernel.org/.../balbi/usb into usb-next
Merge tag 'usb-ci-v4.21-rc1' of git://git.kernel.org/.../peter.chen/usb into usb-next
Merge tag 'usb-serial-4.21-rc1' of https://git.kernel.org/.../johan/usb-serial into usb-next
Merge USB 4.20-rc8 mergepoint into usb-next
Grygorii Strashko (9):
phy: core: rework phy_set_mode to accept phy mode and submode
phy: core: add PHY_MODE_ETHERNET
phy: ocelot-serdes: convert to use eth phy mode and submode
phy: mvebu-cp110-comphy: convert to use eth phy mode and submode
phy: core: clean up unused ethernet specific phy modes
dt-bindings: phy: add cpsw port interface mode selection phy bindings
phy: ti: introduce phy-gmii-sel driver
dt-bindings: net: ti: cpsw: switch to use phy-gmii-sel phy
net: ethernet: ti: cpsw: add support for port interface mode selection phy
Heikki Krogerus (2):
usb: roles: Add a description for the class to Kconfig
usb: typec: Improve Alt Mode documentation
Hsin-Yi, Wang (2):
usb/mtu3: power down device ip at setup
usb/mtu3: power down device ip at setup
Icenowy Zheng (3):
dt-bindings: phy: add binding for Allwinner H6 USB2 PHY
phy: sun4i-usb: add support for missing USB PHY index
phy: sun4i-usb: add support for H6 USB2 PHY
JackyChou (2):
USB: serial: mos7840: clean up register handling
USB: serial: mos7840: add a product ID for the new product
Jarkko Nikula (1):
usb: renesas_usbhs: Remove dummy runtime PM callbacks
Ji-Ze Hong (Peter Hong) (1):
USB: serial: f81534: fix reading old/new IC config
Jia-Ju Bai (1):
usb: r8a66597: Fix a possible concurrency use-after-free bug in r8a66597_endpoint_disable()
Julia Lawall (2):
usb: gadget: aspeed-vhub: constify usb_gadget_ops structure
usb: gadget: uvc: constify vb2_ops structure
Jörgen Storvist (1):
USB: serial: option: add Fibocom NL678 series
Kyle Tso (1):
usb: typec: tcpm: Extend the matching rules on PPS APDO selection
Li Jun (1):
phy: add driver for Freescale i.MX8MQ USB3 PHY
Lucas Stach (1):
dt-bindings: phy: add binding for Freescale i.MX8MQ USB3 PHY
Macpaul Lin (1):
cdc-acm: fix abnormal DATA RX issue for Mediatek Preloader.
Marek Szyprowski (1):
usb: dwc2: Disable power down feature on Samsung SoCs
Martin Blumenstingl (1):
usb: dwc2: disable power_down on Amlogic devices
Mathias Nyman (8):
usb: hub: delay hub autosuspend if USB3 port is still link training
xhci: move bus_state structure under the xhci_hub structure.
xhci: remove unused hcd_index()
xhci: move usb3 speficic bits to own function in get_port_status call
xhci: move usb2 speficic bits to own function in get_port_status call
xhci: cleanup code that sets portstatus and portchange bits
xhci: refactor U0 link state handling in get_port_status
xhci: move usb2 get port status link resume handling to its own function
Maxime Ripard (4):
phy: Add MIPI D-PHY mode
phy: Add configuration interface
phy: Add MIPI D-PHY configuration options
phy: dphy: Add configuration helpers
Minas Harutyunyan (1):
usb: dwc2: Fix disable all EP's on disconnect
Miquel Raynal (1):
phy: mvebu-cp110-comphy: fix spelling in structure name
Nikolaj Fogh (1):
USB: serial: ftdi_sio: use rounding when calculating baud rate divisors
Peter Chen (4):
usb: chipidea: add flag for imx hsic implementation
usb: chipidea: imx: add HSIC support
usb: chipidea: host: override ehci->hub_control
doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
Rob Herring (2):
MAINTAINERS: Add Kishon as maintainer of PHY bindings
phy: Use of_node_name_eq for node name comparisons
Roger Quadros (1):
usb: ehci-omap: Fix deferred probe for phy handling
Scott Chen (1):
USB: serial: pl2303: add ids for Hewlett-Packard HP POS pole displays
Stephan Gerhold (1):
Revert "usb: dwc3: pci: Use devm functions to get the phy GPIOs"
Suwan Kim (1):
usb: core: Remove unnecessary memset()
Tejas Joglekar (1):
usb: dwc3: gadget: Disable CSP for stream OUT ep
Terin Stock (1):
usb: dwc2: host: use hrtimer for NAK retries
Thinh Nguyen (14):
usb: dwc3: debugfs: Properly name Tx/RxFIFO
usb: dwc3: debugfs: Print eps Tx/RxFIFO in bytes
usb: dwc3: debugfs: Dump internal LSP and ep registers
usb: dwc3: debugfs: Properly print/set link state for HS
usb: dwc3: debugfs: Print/set link state for peripheral mode
usb: dwc3: Set GUSB2PHYCFG.ENBLSLPM
usb: dwc3: Add a property to disable USB2 LPM
usb: dwc3: Support option to disable USB2 LPM
usb: dwc3: Set default mode for DWC_usb3 v3.30a and higher
usb: dwc3: Track DWC_usb31 VERSIONTYPE
usb: dwc3: Add disabling of start_transfer failure quirk
usb: dwc3: Add workaround for isoc start transfer failure
usb: gadget: Introduce frame_number to usb_request
usb: dwc3: gadget: Report isoc transfer frame number
Thiébaud Weksteen (1):
Documentation/usb: Fix typo
Tony Lindgren (1):
phy: mapphone-mdm6600: Improve phy related runtime PM calls
Uwe Kleine-König (3):
usb: chipidea: imx: support configuring for active low oc signal
usb: chipidea: imx: Warn if oc polarity isn't specified
usb: chipidea: imx: allow to configure oc polarity on i.MX25
Vincent Pelletier (1):
usb: gadget: f_fs: Add support for CCID descriptors.
Yangtao Li (2):
USB: gadget: udc: s3c2410_udc: convert to DEFINE_SHOW_ATTRIBUTE
usb: host: isp1362-hcd: convert to DEFINE_SHOW_ATTRIBUTE
Yoshihiro Shimoda (3):
usb: gadget: udc: renesas_usb3: add a safety connection way for forced_b_device
usb: renesas_usbhs: Use SIMPLE_DEV_PM_OPS macro
phy: renesas: rcar-gen3-usb2: follow the hardware manual procedure
YueHaibing (4):
USB: serial: quatech2: remove set but not used variable 'port_priv'
USB: serial: mos7840: remove set but not used variables 'st, data1, iflag'
usb: mtu3: fix dbginfo in qmu_tx_zlp_error_handler
USB: serial: mos7840: remove set but not used variables 'number, serial'
Zeng Tao (1):
xhci: remove the unused sw_lpm_support
kbuild test robot (1):
phy: ti: fix semicolon.cocci warnings
.../bindings/connector/usb-connector.txt | 2 +
Documentation/devicetree/bindings/net/cpsw.txt | 8 +-
.../devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt | 17 +
.../devicetree/bindings/phy/phy-cadence-sierra.txt | 67 ++++
.../devicetree/bindings/phy/qcom-qmp-phy.txt | 77 +++-
.../devicetree/bindings/phy/sun4i-usb-phy.txt | 8 +-
.../devicetree/bindings/phy/ti-phy-gmii-sel.txt | 68 ++++
.../devicetree/bindings/usb/ci-hdrc-usb2.txt | 36 +-
Documentation/devicetree/bindings/usb/dwc3.txt | 4 +
Documentation/driver-api/usb/index.rst | 1 +
Documentation/driver-api/usb/typec.rst | 1 +
Documentation/driver-api/usb/typec_bus.rst | 24 +-
Documentation/usb/authorization.txt | 2 +-
MAINTAINERS | 1 +
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 19 +-
drivers/net/ethernet/mscc/ocelot.c | 9 +-
drivers/net/ethernet/ti/cpsw.c | 19 +-
drivers/phy/Kconfig | 9 +
drivers/phy/Makefile | 2 +
drivers/phy/allwinner/phy-sun4i-usb.c | 29 +-
drivers/phy/amlogic/phy-meson-gxl-usb2.c | 5 +-
drivers/phy/amlogic/phy-meson-gxl-usb3.c | 5 +-
drivers/phy/cadence/Kconfig | 9 +-
drivers/phy/cadence/Makefile | 1 +
drivers/phy/cadence/phy-cadence-sierra.c | 395 +++++++++++++++++++++
drivers/phy/freescale/Kconfig | 5 +
drivers/phy/freescale/Makefile | 1 +
drivers/phy/freescale/phy-fsl-imx8mq-usb.c | 127 +++++++
drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 97 ++---
drivers/phy/mediatek/phy-mtk-tphy.c | 2 +-
drivers/phy/mediatek/phy-mtk-xsphy.c | 2 +-
drivers/phy/motorola/phy-mapphone-mdm6600.c | 71 ++--
drivers/phy/mscc/phy-ocelot-serdes.c | 24 +-
drivers/phy/phy-core-mipi-dphy.c | 166 +++++++++
drivers/phy/phy-core.c | 70 +++-
drivers/phy/qualcomm/phy-qcom-qmp.c | 77 +++-
drivers/phy/qualcomm/phy-qcom-qusb2.c | 3 +-
drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c | 3 +-
drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c | 3 +-
drivers/phy/qualcomm/phy-qcom-usb-hs.c | 3 +-
drivers/phy/renesas/phy-rcar-gen3-usb2.c | 17 +-
drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 6 +-
drivers/phy/rockchip/phy-rockchip-typec.c | 4 +-
drivers/phy/ti/Kconfig | 10 +
drivers/phy/ti/Makefile | 1 +
drivers/phy/ti/phy-da8xx-usb.c | 3 +-
drivers/phy/ti/phy-gmii-sel.c | 349 ++++++++++++++++++
drivers/phy/ti/phy-tusb1210.c | 2 +-
drivers/platform/x86/intel_cht_int33fe.c | 2 +-
drivers/usb/Kconfig | 4 -
drivers/usb/chipidea/ci_hdrc_imx.c | 158 +++++++--
drivers/usb/chipidea/ci_hdrc_imx.h | 17 +-
drivers/usb/chipidea/host.c | 92 +++++
drivers/usb/chipidea/usbmisc_imx.c | 183 +++++++++-
drivers/usb/class/cdc-acm.c | 10 +
drivers/usb/class/cdc-acm.h | 1 +
drivers/usb/common/Makefile | 1 -
drivers/usb/core/hcd.c | 2 -
drivers/usb/core/hub.c | 10 +
drivers/usb/dwc2/gadget.c | 44 ++-
drivers/usb/dwc2/hcd.h | 2 +-
drivers/usb/dwc2/hcd_queue.c | 19 +-
drivers/usb/dwc2/hw.h | 2 +
drivers/usb/dwc2/params.c | 11 +-
drivers/usb/dwc3/core.c | 19 +-
drivers/usb/dwc3/core.h | 60 +++-
drivers/usb/dwc3/debug.h | 29 ++
drivers/usb/dwc3/debugfs.c | 201 ++++++++++-
drivers/usb/dwc3/drd.c | 15 +-
drivers/usb/dwc3/dwc3-pci.c | 8 +-
drivers/usb/dwc3/gadget.c | 342 +++++++++++-------
drivers/usb/dwc3/gadget.h | 15 +
drivers/usb/dwc3/host.c | 5 +-
drivers/usb/dwc3/trace.h | 4 +-
drivers/usb/early/ehci-dbgp.c | 38 +-
drivers/usb/gadget/function/f_fs.c | 122 ++++++-
drivers/usb/gadget/function/uvc_queue.c | 2 +-
drivers/usb/gadget/udc/aspeed-vhub/dev.c | 2 +-
drivers/usb/gadget/udc/pch_udc.c | 2 +-
drivers/usb/gadget/udc/renesas_usb3.c | 15 +-
drivers/usb/gadget/udc/s3c2410_udc.c | 17 +-
drivers/usb/host/ehci-omap.c | 7 +-
drivers/usb/host/isp1362-hcd.c | 16 +-
drivers/usb/host/ohci-mem.c | 12 +-
drivers/usb/host/r8a66597-hcd.c | 5 +-
drivers/usb/host/xhci-hub.c | 351 ++++++++++--------
drivers/usb/host/xhci-mem.c | 30 +-
drivers/usb/host/xhci-ring.c | 2 +-
drivers/usb/host/xhci.c | 22 +-
drivers/usb/host/xhci.h | 13 +-
drivers/usb/misc/appledisplay.c | 8 +-
drivers/usb/mtu3/mtu3_core.c | 20 +-
drivers/usb/mtu3/mtu3_gadget_ep0.c | 14 +-
drivers/usb/mtu3/mtu3_hw_regs.h | 6 +
drivers/usb/mtu3/mtu3_plat.c | 8 +
drivers/usb/mtu3/mtu3_qmu.c | 28 +-
drivers/usb/musb/musb_dsps.c | 21 +-
drivers/usb/renesas_usbhs/common.c | 27 +-
drivers/usb/roles/Kconfig | 13 +
drivers/usb/roles/Makefile | 4 +-
drivers/usb/{common/roles.c => roles/class.c} | 0
drivers/usb/serial/f81534.c | 20 +-
drivers/usb/serial/ftdi_sio.c | 6 +-
drivers/usb/serial/mos7840.c | 71 ++--
drivers/usb/serial/option.c | 4 +
drivers/usb/serial/pl2303.c | 5 +
drivers/usb/serial/pl2303.h | 5 +
drivers/usb/serial/quatech2.c | 3 -
drivers/usb/storage/ene_ub6250.c | 2 +-
drivers/usb/typec/tcpm/fusb302.c | 2 +-
drivers/usb/typec/tcpm/tcpm.c | 56 ++-
drivers/uwb/i1480/dfu/usb.c | 2 +-
include/linux/phy/phy-mipi-dphy.h | 285 +++++++++++++++
include/linux/phy/phy.h | 83 ++++-
include/linux/usb/ccid.h | 51 +++
include/linux/usb/chipidea.h | 3 +
include/linux/usb/gadget.h | 4 +
include/linux/usb/hcd.h | 5 -
include/linux/usb/tcpm.h | 1 +
119 files changed, 3695 insertions(+), 838 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt
create mode 100644 Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt
create mode 100644 Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt
create mode 100644 drivers/phy/cadence/phy-cadence-sierra.c
create mode 100644 drivers/phy/freescale/Kconfig
create mode 100644 drivers/phy/freescale/Makefile
create mode 100644 drivers/phy/freescale/phy-fsl-imx8mq-usb.c
create mode 100644 drivers/phy/phy-core-mipi-dphy.c
create mode 100644 drivers/phy/ti/phy-gmii-sel.c
rename drivers/usb/{common/roles.c => roles/class.c} (100%)
create mode 100644 include/linux/phy/phy-mipi-dphy.h
create mode 100644 include/linux/usb/ccid.h
Powered by blists - more mailing lists