lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190104112131.14451-5-afaerber@suse.de>
Date:   Fri,  4 Jan 2019 12:21:30 +0100
From:   Andreas Färber <afaerber@...e.de>
To:     linux-lpwan@...ts.infradead.org, linux-serial@...r.kernel.org
Cc:     linux-usb@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, Johan Hovold <johan@...nel.org>,
        Rob Herring <robh@...nel.org>,
        Andreas Färber <afaerber@...e.de>,
        Oliver Neukum <oneukum@...e.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Subject: [PATCH RFC 4/5] usb: cdc-acm: Enable serdev support

Switch from tty_port_register_device() to tty_port_register_device_serdev()
and from tty_unregister_device() to tty_port_unregister_device().

On removal of a serdev driver sometimes count mismatch warnings were seen:

  ttyACM ttyACM0: tty_hangup: tty->count(1) != (#fd's(0) + #kopen's(0))
  ttyACM ttyACM0: tty_port_close_start: tty->count = 1 port count = 0

Note: The serdev drivers appear to probe asynchronously as soon as they
are registered. Should the USB quirks in probe be moved before registration?
No noticeable difference for the devices at hand.

Cc: Rob Herring <robh@...nel.org>
Cc: Johan Hovold <johan@...nel.org>
Signed-off-by: Andreas Färber <afaerber@...e.de>
---
 drivers/usb/class/cdc-acm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index ed8c62b2d9d1..c225a586c524 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1460,7 +1460,7 @@ static int acm_probe(struct usb_interface *intf,
 	usb_set_intfdata(data_interface, acm);
 
 	usb_get_intf(control_interface);
-	tty_dev = tty_port_register_device(&acm->port, acm_tty_driver, minor,
+	tty_dev = tty_port_register_device_serdev(&acm->port, acm_tty_driver, minor,
 			&control_interface->dev);
 	if (IS_ERR(tty_dev)) {
 		rv = PTR_ERR(tty_dev);
@@ -1534,7 +1534,7 @@ static void acm_disconnect(struct usb_interface *intf)
 	acm_kill_urbs(acm);
 	cancel_work_sync(&acm->work);
 
-	tty_unregister_device(acm_tty_driver, acm->minor);
+	tty_port_unregister_device(&acm->port, acm_tty_driver, acm->minor);
 
 	usb_free_urb(acm->ctrlurb);
 	for (i = 0; i < ACM_NW; i++)
-- 
2.16.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ