Message-ID: <CAFqH_53fSMJXz-bBaMgj5c3-z-ovbDHp+aAg=TrVMh0k9Bw0hg@mail.gmail.com>
Date:   Fri, 4 Jan 2019 12:38:50 +0100
From:   Enric Balletbo Serra <eballetbo@...il.com>
To:     Peter Shih <pihsun@...omium.org>
Cc:     Nicolas Boichat <drinkcat@...omium.org>,
        Lee Jones <lee.jones@...aro.org>,
        Benson Leung <bleung@...omium.org>,
        Olof Johansson <olof@...om.net>,
        open list <linux-kernel@...r.kernel.org>,
        Guenter Roeck <groeck@...omium.org>
Subject: Re: [RFC,5/5] mfd: cros_ec: add EC host command support using rpmsg.

Hi Peter,

Missatge de Peter Shih <pihsun@...omium.org> del dia dv., 4 de gen.
2019 a les 8:58:
>
> Thanks for the review.
> I would leave some formatting comment to v2, and reply others first.
>
> On Fri, Jan 4, 2019 at 12:05 AM Enric Balletbo Serra
> <eballetbo@...il.com> wrote:
> >
> > Hi,
> >
> > Many thanks for sending this. Please, add Guenter and me for next
> > versions, we are interested in it, thanks :)
> >
> > Missatge de Pi-Hsun Shih <pihsun@...omium.org> del dia dc., 26 de des.
> > 2018 a les 8:57:
> > >
> > > Add EC host command support through rpmsg.
> > >
> > > Signed-off-by: Pi-Hsun Shih <pihsun@...omium.org>
> > > ---
> > >  drivers/mfd/cros_ec_dev.c               |   9 ++
> > >  drivers/platform/chrome/Kconfig         |   8 ++
> > >  drivers/platform/chrome/Makefile        |   1 +
> > >  drivers/platform/chrome/cros_ec_rpmsg.c | 164 ++++++++++++++++++++++++
> > >  include/linux/mfd/cros_ec.h             |   1 +
> > >  include/linux/mfd/cros_ec_commands.h    |   2 +
> > >  6 files changed, 185 insertions(+)
> > >  create mode 100644 drivers/platform/chrome/cros_ec_rpmsg.c
> > >
> > > diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
> > > index 2d0fee488c5aa8..67983853413d07 100644
> > > --- a/drivers/mfd/cros_ec_dev.c
> > > +++ b/drivers/mfd/cros_ec_dev.c
> > > @@ -414,6 +414,15 @@ static int ec_device_probe(struct platform_device *pdev)
> > >         device_initialize(&ec->class_dev);
> > >         cdev_init(&ec->cdev, &fops);
> > >
> > > +       if (cros_ec_check_features(ec, EC_FEATURE_SCP)) {
> > > +               dev_info(dev, "SCP detected.\n");
> > > +               /*
> > > +                * Help userspace differentiating ECs from SCP,
> > > +                * regardless of the probing order.
> > > +                */
> > > +               ec_platform->ec_name = CROS_EC_DEV_SCP_NAME;
> > > +       }
> > > +
> >
> > Why userspace should know that this is an SCP? From the userspace
> > point of view shouldn't be this transparent, we don't do distinctions
> > when the transport layer is i2c, spi or lpc, and I think that the
> > cros_ec_rpmsg driver is a cros-ec transport layer, like these. So, I
> > think that this is not needed.
> >
>
> Since both the EC and the SCP talk in EC host command format here, and they can
> both exist on the same system, if we don't do the distinction, both of them
> would be registered as /dev/cros_ec, and cause an error.
>

Interesting, so this system will have two cros-ec, one connected via
spi or i2c to the soc and another one using the M4 within the M8183?

Actually, on some systems, we have chained EC's (ie cros_ec and
cros_pd). The way we actually handle the name to access the different
ECs is create a mfd cell with their specific platform data, I am
wondering if we can do the same here (see drivers/mfd/cros_ec.c)

> This change is actually independent to the rpmsg change (EC through all
> transport layer can report that they have feature EC_FEATURE_SCP, and would
> then be seen from userspace as /dev/cros_scp), I'll move this to another patch
> in v2.
>
> > >         /*
> > >          * Add the class device
> > >          * Link to the character device for creating the /dev entry
> > > diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig
> > > index 16b1615958aa2d..b03d68eb732177 100644
> > > --- a/drivers/platform/chrome/Kconfig
> > > +++ b/drivers/platform/chrome/Kconfig
> > > @@ -72,6 +72,14 @@ config CROS_EC_SPI
> > >           response time cannot be guaranteed, we support ignoring
> > >           'pre-amble' bytes before the response actually starts.
> > >
> > > +config CROS_EC_RPMSG
> > > +       tristate "ChromeOS Embedded Controller (rpmsg)"
> > > +       depends on MFD_CROS_EC && RPMSG
> >
> > I think that this driver is DT-only, && OF ?
>
> Would add this in v2.
>
> >
> > > +       help
> > > +         If you say Y here, you get support for talking to the ChromeOS EC
> > > +         through rpmsg. This uses a simple byte-level protocol with a
> > > +         checksum.
> > > +
> > >  config CROS_EC_LPC
> > >          tristate "ChromeOS Embedded Controller (LPC)"
> > >          depends on MFD_CROS_EC && ACPI && (X86 || COMPILE_TEST)
> > > diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile
> > > index cd591bf872bbe9..3e3190af2b50f4 100644
> > > --- a/drivers/platform/chrome/Makefile
> > > +++ b/drivers/platform/chrome/Makefile
> > > @@ -8,6 +8,7 @@ cros_ec_ctl-objs                        := cros_ec_sysfs.o cros_ec_lightbar.o \
> > >  obj-$(CONFIG_CROS_EC_CTL)              += cros_ec_ctl.o
> > >  obj-$(CONFIG_CROS_EC_I2C)              += cros_ec_i2c.o
> > >  obj-$(CONFIG_CROS_EC_SPI)              += cros_ec_spi.o
> > > +obj-$(CONFIG_CROS_EC_RPMSG)            += cros_ec_rpmsg.o
> > >  cros_ec_lpcs-objs                      := cros_ec_lpc.o cros_ec_lpc_reg.o
> > >  cros_ec_lpcs-$(CONFIG_CROS_EC_LPC_MEC) += cros_ec_lpc_mec.o
> > >  obj-$(CONFIG_CROS_EC_LPC)              += cros_ec_lpcs.o
> > > diff --git a/drivers/platform/chrome/cros_ec_rpmsg.c b/drivers/platform/chrome/cros_ec_rpmsg.c
> > > new file mode 100644
> > > index 00000000000000..f123ca6d1c029c
> > > --- /dev/null
> > > +++ b/drivers/platform/chrome/cros_ec_rpmsg.c
> > > @@ -0,0 +1,164 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +//
> > > +// Copyright 2018 Google LLC.
> > > +
> > > +#include <linux/delay.h>
> > > +#include <linux/kernel.h>
> > > +#include <linux/module.h>
> > > +#include <linux/mfd/cros_ec.h>
> > > +#include <linux/mfd/cros_ec_commands.h>
> > > +#include <linux/of.h>
> > > +#include <linux/platform_device.h>
> > > +#include <linux/rpmsg.h>
> > > +#include <linux/slab.h>
> > > +
> > > +/**
> > > + * cros_ec_cmd_xfer_rpmsg - Transfer a message over rpmsg and receive the reply
> > > + *
> > > + * This is only used for old EC proto version, and is not supported for this
> > > + * driver.
> > > + *
> > > + * @ec_dev: ChromeOS EC device
> > > + * @ec_msg: Message to transfer
> > > + */
> > > +static int cros_ec_cmd_xfer_rpmsg(struct cros_ec_device *ec_dev,
> > > +                                 struct cros_ec_command *ec_msg)
> > > +{
> > > +       return -EINVAL;
> > > +}
> > > +
> > > +/**
> > > + * cros_ec_pkt_xfer_rpmsg - Transfer a packet over rpmsg and receive the reply
> > > + *
> > > + * @ec_dev: ChromeOS EC device
> > > + * @ec_msg: Message to transfer
> > > + */
> > > +static int cros_ec_pkt_xfer_rpmsg(struct cros_ec_device *ec_dev,
> > > +                                 struct cros_ec_command *ec_msg)
> > > +{
> > > +       struct ec_host_response *response;
> > > +       struct rpmsg_device *rpdev = ec_dev->priv;
> > > +       int len;
> > > +       u8 sum;
> > > +       int ret;
> > > +       int i;
> > > +
> > > +       ec_msg->result = 0;
> > > +       len = cros_ec_prepare_tx(ec_dev, ec_msg);
> > > +       dev_dbg(ec_dev->dev, "prepared, len=%d\n", len);
> > > +
> > > +       // TODO: This currently relies on that mtk_rpmsg send actually blocks
> > > +       // until ack. Should do the wait here instead.
> >
> > Use standard C style comments.
> >
> > > +       ret = rpmsg_send(rpdev->ept, ec_dev->dout, len);
> > > +
> >
> > Remove that empty  line.
> >
> > > +       if (ret) {
> > > +               dev_err(ec_dev->dev, "rpmsg send failed\n");
> > > +               return ret;
> > > +       }
> > > +
> > > +       /* check response error code */
> > > +       response = (struct ec_host_response *)ec_dev->din;
> > > +       ec_msg->result = response->result;
> > > +
> > > +       ret = cros_ec_check_result(ec_dev, ec_msg);
> > > +       if (ret)
> > > +               goto exit;
> > > +
> > > +       if (response->data_len > ec_msg->insize) {
> > > +               dev_err(ec_dev->dev, "packet too long (%d bytes, expected %d)",
> > > +                       response->data_len, ec_msg->insize);
> > > +               ret = -EMSGSIZE;
> > > +               goto exit;
> > > +       }
> > > +
> > > +       /* copy response packet payload and compute checksum */
> > > +       memcpy(ec_msg->data, ec_dev->din + sizeof(*response),
> > > +              response->data_len);
> > > +
> > > +       sum = 0;
> > > +       for (i = 0; i < sizeof(*response) + response->data_len; i++)
> > > +               sum += ec_dev->din[i];
> > > +
> > > +       if (sum) {
> > > +               dev_err(ec_dev->dev, "bad packet checksum, calculated %x\n",
> > > +                       sum);
> > > +               ret = -EBADMSG;
> > > +               goto exit;
> > > +       }
> > > +
> > > +       ret = response->data_len;
> > > +exit:
> > > +       if (ec_msg->command == EC_CMD_REBOOT_EC)
> > > +               msleep(EC_REBOOT_DELAY_MS);
> >
> > Can you explain why this sleep is needed?
>
> From the comment of EC_CMD_REBOOT_EC: "The EC is unresponsive for a time after
> a reboot command. Add a simple delay to make sure that the bus stays locked."
>
> This is copied from other transport layer drivers, and probably not needed
> since we would reload the firmware for SCP while it's rebooting. I would test
> to see if this is needed when the reboot flow for SCP work as expected.
> (There's still some firmware work need to be done before it can be tested...)
>
> >
> > > +
> > > +       return ret;
> > > +}
> > > +
> > > +static int cros_ec_rpmsg_callback(struct rpmsg_device *rpdev, void *data,
> > > +                                 int len, void *priv, u32 src)
> > > +{
> > > +       struct cros_ec_device *ec_dev = dev_get_drvdata(&rpdev->dev);
> > > +
> > > +       if (len > ec_dev->din_size) {
> > > +               dev_warn(ec_dev->dev,
> > > +                        "ipi received length %d > din_size, truncating", len);
> > > +               len = ec_dev->din_size;
> > > +       }
> > > +
> > > +       memcpy(ec_dev->din, data, len);
> > > +
> > > +       return 0;
> > > +}
> > > +
> > > +static int cros_ec_rpmsg_probe(struct rpmsg_device *rpdev)
> > > +{
> > > +       struct device *dev = &rpdev->dev;
> > > +
> > Remove that empty line
> >
> > > +       struct cros_ec_device *ec_dev;
> > > +       int ret;
> > > +
> > > +       ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);
> > > +       if (!ec_dev)
> > > +               return -ENOMEM;
> > > +
> > > +       ec_dev->dev = dev;
> > > +       ec_dev->priv = rpdev;
> > > +       ec_dev->cmd_xfer = cros_ec_cmd_xfer_rpmsg;
> > > +       ec_dev->pkt_xfer = cros_ec_pkt_xfer_rpmsg;
> > > +       ec_dev->phys_name = dev_name(&rpdev->dev);
> > > +       ec_dev->din_size = sizeof(struct ec_host_response) +
> > > +                          sizeof(struct ec_response_get_protocol_info);
> > > +       ec_dev->dout_size = sizeof(struct ec_host_request);
> > > +       dev_set_drvdata(dev, ec_dev);
> > > +
> > > +       ret = cros_ec_register(ec_dev);
> > > +       if (ret)
> >
> > I'd add an error message here
> >
> >   dev_err(dev, "cannot register EC\n"
> >
> > > +               return ret;
> > > +
> > > +       return 0;
> > > +}
> > > +
> > > +static void cros_ec_rpmsg_remove(struct rpmsg_device *rpdev)
> >
> > This function will not be needed after apply [1]. I would recommend
> > base your patches on top of [2]
> >
> > [1] https://lkml.org/lkml/2018/12/12/672
> > [2] https://lkml.org/lkml/2018/12/12/679
>
> Noted.
>
> >
> > > +{
> > > +       struct cros_ec_device *ec_dev = dev_get_drvdata(&rpdev->dev);
> > > +
> > > +       cros_ec_remove(ec_dev);
> > > +}
> > > +
> >
> > How this driver is instantiated?
> >
> > I expect something like this here (like the other transport layers)
> >
> > static const struct of_device_id cros_ec_rpmsg_of_match[] = {
> >         { .compatible = "google,cros-ec-rpmsg", },
> >         { }
> > };
> > MODULE_DEVICE_TABLE(of, cros_ec_rpmsg_of_match);
> >
> > And the DT containing the compatible = "google,cros-ec-rpmsg" like the
> > other cros-ec transport layers.
>
> This is a part that I'm getting quite confused on how to do properly.
> For SPI, a spi_device is created for each node listed under spi node in device
> tree.
> spi0 {
>         compatible = "xxx-spi";
>         cros_ec@0 {
>                 compatible = "google,cros-ec-spi";
>         };
> }
>
> For rpmsg, the rpmsg_device are dynamically created from the request
> of the SCP, and then a matching rpmsg_driver is used when found.
> Currently without the cros-ec-rpmsg being in the device tree, the cros_ec_rpmsg
> module would need to be manually loaded by modprobe.
>
> To follow what SPI/I2C does, the device tree would look like:
> scp {
>         compatible = "mediatek,mt8183-scp";
>         mt8183-rpmsg {
>                 compatible = "mediatek,mt8183-rpmsg";
>                 cros_ec_rpmsg {
>                         compatible = "google,cros-ec-rpmsg";
>                 };
>         };
> };
> But the rpmsg driver would not actually create those rpmsg_device on probe, but
> only look at those sub node and load the corresponding rpmsg_driver modules.
> When requested by SCP to create the rpmsg_device, it would find a matching
> rpmsg_driver independent on how the device tree looks.
>
> So my question is, should these dynamically created rpmsg_device be listed on
> device tree?
>

I think that right now that's our main problem, how to properly
instantiate all this stuff. One approach that I like is the one used
in the TI PRU ICSS, they create a pruss_soc_bus driver with the
purpose to allow the child nodes to be bound. I suspect that something
similar would work, but I need to look in more detail. See [1]

[1] https://lkml.org/lkml/2018/11/22/948

Cheers,
 Enric

> >
> > > +static const struct rpmsg_device_id cros_ec_rpmsg_device_id[] = {
> > > +       { .name = "cros-ec-rpmsg", },
> > > +       { /* sentinel */ },
> >
> > I got convinced that the '/* sentinel */' comment doesn't means
> > anything, so use { } only here, remove the comment and the last comma
> > (there is nothing to separate)
> > +      { }
> >
> > > +};
> > > +
> > > +static struct rpmsg_driver cros_ec_driver_rpmsg = {
> > > +       .drv.name       = KBUILD_MODNAME,
> >
> > And something like this here
> >         .drv = {
> >                 .name   = "cros-ec-rpmsg",
> >                 .of_match_table = cros_ec_rpmsg_of_match,
> >         },
> >
> > > +       .id_table       = cros_ec_rpmsg_device_id,
> > > +       .probe          = cros_ec_rpmsg_probe,
> > > +       .remove         = cros_ec_rpmsg_remove,
> > > +       .callback       = cros_ec_rpmsg_callback,
> > > +};
> > > +
> > > +module_rpmsg_driver(cros_ec_driver_rpmsg);
> > > +
> > > +MODULE_LICENSE("GPL v2");
> > > +MODULE_DESCRIPTION("ChromeOS EC multi function device (rpmsg)");
> > > diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
> > > index de8b588c8776da..fd297cf8f97295 100644
> > > --- a/include/linux/mfd/cros_ec.h
> > > +++ b/include/linux/mfd/cros_ec.h
> > > @@ -24,6 +24,7 @@
> > >
> > >  #define CROS_EC_DEV_NAME "cros_ec"
> > >  #define CROS_EC_DEV_PD_NAME "cros_pd"
> > > +#define CROS_EC_DEV_SCP_NAME "cros_scp"
> >
> > I think this definition is not needed.
> >
> > >
> > >  /*
> > >   * The EC is unresponsive for a time after a reboot command.  Add a
> > > diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
> > > index fc91082d4c357b..3e5da6e93b2f42 100644
> > > --- a/include/linux/mfd/cros_ec_commands.h
> > > +++ b/include/linux/mfd/cros_ec_commands.h
> > > @@ -856,6 +856,8 @@ enum ec_feature_code {
> > >         EC_FEATURE_RTC = 27,
> > >         /* EC supports CEC commands */
> > >         EC_FEATURE_CEC = 35,
> > > +       /* The MCU exposes a SCP */
> > > +       EC_FEATURE_SCP = 39,
> >
> > Same here, I think this is not needed.
> > >  };
> > >
> > >  #define EC_FEATURE_MASK_0(event_code) (1UL << (event_code % 32))
> > > --
> > > 2.20.1.415.g653613c723-goog
> > >
> >
> > Thanks,
> >   Enric

Powered by blists - more mailing lists