| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <50db3bc3faea97182b7fe18b4d9677f7e1563eaa.camel@collabora.com>
Date: Sun, 06 Jan 2019 11:22:17 -0300
From: Ezequiel Garcia <ezequiel@...labora.com>
To: Randy Li <ayaka@...lik.info>, linux-rockchip@...ts.infradead.org,
Tomasz Figa <tfiga@...omium.org>
Cc: nicolas.dufresne@...labora.com, myy@...uyouyou.fr,
paul.kocialkowski@...tlin.com, mchehab@...nel.org,
linux-media@...r.kernel.org, hverkuil@...all.nl, heiko@...ech.de,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 4/4] arm64: dts: rockchip: add video codec for rk3399
Hi Randy,
Thanks a lot for this patches. They are really useful
to provide more insight into the VPU hardware.
This change will make the vpu encoder and vpu decoder
completely independent, can they really work in parallel?
Could you provide more details about what is
shared between these devices?
Thanks a lot!
On Sun, 2019-01-06 at 02:31 +0800, Randy Li wrote:
> It offers an example how a full features video codec
> should be configured.
>
> The original clocks assignment don't look good, if the clocks
> lower than 300MHZ, most of decoing tasks would suffer from
> timeout problem, 500MHZ is also a little high for RK3399
> running in a stable state.
>
> Signed-off-by: Randy Li <ayaka@...lik.info>
> ---
> .../boot/dts/rockchip/rk3399-sapphire.dtsi | 29 ++++++++
> arch/arm64/boot/dts/rockchip/rk3399.dtsi | 68 +++++++++++++++++--
> 2 files changed, 90 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
> index 946d3589575a..c3db878bae45 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
> @@ -632,6 +632,35 @@
> dr_mode = "host";
> };
>
> +&rkvdec {
> + status = "okay";
> +};
> +
> +&rkvdec_srv {
> + status = "okay";
> +};
> +
> +&vdec_mmu {
> + status = "okay";
> +};
> +
> +&vdpu {
> + status = "okay";
> +};
> +
> +&vepu {
> + status = "okay";
> +};
> +
> +&vpu_service {
> + status = "okay";
> +};
> +
> +&vpu_mmu {
> + status = "okay";
> +
> +};
> +
> &vopb {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> index b22b2e40422b..5fa3247e7bf0 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> @@ -1242,16 +1242,39 @@
> status = "disabled";
> };
>
> - vpu: video-codec@...50000 {
> - compatible = "rockchip,rk3399-vpu";
> - reg = <0x0 0xff650000 0x0 0x800>;
> - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>,
> - <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>;
> - interrupt-names = "vepu", "vdpu";
> + vpu_service: vpu-srv {
> + compatible = "rockchip,mpp-service";
> + status = "disabled";
> + };
> +
> + vepu: vpu-encoder@...50000 {
> + compatible = "rockchip,vpu-encoder-v2";
> + reg = <0x0 0xff650000 0x0 0x400>;
> + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>;
> + interrupt-names = "irq_enc";
> clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
> - clock-names = "aclk", "hclk";
> + clock-names = "aclk_vcodec", "hclk_vcodec";
> + resets = <&cru SRST_H_VCODEC>, <&cru SRST_A_VCODEC>;
> + reset-names = "video_h", "video_a";
> iommus = <&vpu_mmu>;
> power-domains = <&power RK3399_PD_VCODEC>;
> + rockchip,srv = <&vpu_service>;
> + status = "disabled";
> + };
> +
> + vdpu: vpu-decoder@...50400 {
> + compatible = "rockchip,vpu-decoder-v2";
> + reg = <0x0 0xff650400 0x0 0x400>;
> + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>;
> + interrupt-names = "irq_dec";
> + iommus = <&vpu_mmu>;
> + clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
> + clock-names = "aclk_vcodec", "hclk_vcodec";
> + resets = <&cru SRST_H_VCODEC>, <&cru SRST_A_VCODEC>;
> + reset-names = "video_h", "video_a";
> + power-domains = <&power RK3399_PD_VCODEC>;
> + rockchip,srv = <&vpu_service>;
> + status = "disabled";
> };
>
> vpu_mmu: iommu@...50800 {
> @@ -1261,11 +1284,42 @@
> interrupt-names = "vpu_mmu";
> clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
> clock-names = "aclk", "iface";
> + assigned-clocks = <&cru ACLK_VCODEC_PRE>;
> + assigned-clock-parents = <&cru PLL_GPLL>;
> #iommu-cells = <0>;
> power-domains = <&power RK3399_PD_VCODEC>;
> status = "disabled";
> };
>
> + rkvdec_srv: rkvdec-srv {
> + compatible = "rockchip,mpp-service";
> + status = "disabled";
> + };
> +
> + rkvdec: video-decoder@...60000 {
> + compatible = "rockchip,video-decoder-v1";
> + reg = <0x0 0xff660000 0x0 0x400>;
> + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
> + interrupt-names = "irq_dec";
> + clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>,
> + <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;
> + clock-names = "aclk_vcodec", "hclk_vcodec",
> + "clk_cabac", "clk_core";
> + assigned-clocks = <&cru ACLK_VDU_PRE>, <&cru SCLK_VDU_CA>,
> + <&cru SCLK_VDU_CORE>;
> + assigned-clock-parents = <&cru PLL_NPLL>, <&cru PLL_NPLL>,
> + <&cru PLL_NPLL>;
> + resets = <&cru SRST_H_VDU>, <&cru SRST_A_VDU>,
> + <&cru SRST_VDU_CORE>, <&cru SRST_VDU_CA>,
> + <&cru SRST_A_VDU_NOC>, <&cru SRST_H_VDU_NOC>;
> + reset-names = "video_h", "video_a", "video_core", "video_cabac",
> + "niu_a", "niu_h";
> + power-domains = <&power RK3399_PD_VDU>;
> + rockchip,srv = <&rkvdec_srv>;
> + iommus = <&vdec_mmu>;
> + status = "disabled";
> + };
> +
> vdec_mmu: iommu@...60480 {
> compatible = "rockchip,iommu";
> reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>;
Powered by blists - more mailing lists