[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1726a1ef-cfa7-0f97-4388-bf2ba72cb9a9@pobox.com>
Date: Sun, 6 Jan 2019 16:13:13 -0500
From: Mark Lord <mlord@...ox.com>
To: Kai Heng Feng <kai.heng.feng@...onical.com>
Cc: Ansis Atteka <aatteka@...ira.com>,
Hayes Wang <hayeswang@...ltek.com>,
David Miller <davem@...emloft.net>,
"greg@...ah.com" <greg@...ah.com>,
"romieu@...zoreil.com" <romieu@...zoreil.com>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
nic_swsd <nic_swsd@...ltek.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
Mario Limonciello <mario.limonciello@...l.com>
Subject: Re: r8152: data corruption in various scenarios
On 2019-01-06 2:14 p.m., Kai Heng Feng wrote:>> On Jan 5, 2019, at 10:14 PM, Mark Lord
<mlord@...ox.com> wrote:
..
>> There is even now a special hack in the upstream r8152.c to attempt to detect
>> a Dell TB16 dock and disable RX Aggregation in the driver to prevent such issues.
>>
>> Well.. I have a WD15 dock, not a TB16, and that same hack also catches my dock
>> in its net:
>>
>> [5.794641] usb 4-1.2: Dell TB16 Dock, disable RX aggregation
>
> The serial should be unique according to Dell.
>
>> So one issue is that the code is not correctly identifying the dock,
>> and the WD15 is claimed to be immune from the r8152 issues.
>
> The WD15 I tested didn't use that serial number though...
What info do you need from me about the WD15 so this can be corrected?
>> xhci_hcd 0000:39:00.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 13
>> comp_code 1
>
> This is probably an xHC bug. A similar issue is fixed by commit 9da5a1092b13
> ("xhci: Bad Ethernet performance plugged in ASM1042A host”).
>
>> I just got that exact message above, with the r8152 in my 1-day old WD15 dock,
>> with the TB16 "workaround" enabled in Linux kernel 4.20.0.
>
> Is the xHC WD15 connected an ASMedia one?
I don't know. I *think* it identifies as a DSL6340 (see below).
Here is lspci and lsusb:
$ lspci -vt
-[0000:00]-+-00.0 Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers
+-02.0 Intel Corporation UHD Graphics 620
+-04.0 Intel Corporation Skylake Processor Thermal Subsystem
+-14.0 Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller
+-14.2 Intel Corporation Sunrise Point-LP Thermal subsystem
+-15.0 Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0
+-15.1 Intel Corporation Sunrise Point-LP Serial IO I2C Controller #1
+-16.0 Intel Corporation Sunrise Point-LP CSME HECI #1
+-1c.0-[01-39]----00.0-[02-39]--+-00.0-[03]--
| +-01.0-[04-38]--
| \-02.0-[39]----00.0 Intel Corporation DSL6340 USB 3.1
Controller [Alpine Ridge]
+-1c.4-[3a]----00.0 Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter
+-1d.0-[3b]----00.0 Samsung Electronics Co Ltd Device a808
+-1f.0 Intel Corporation Device 9d4e
+-1f.2 Intel Corporation Sunrise Point-LP PMC
+-1f.3 Intel Corporation Sunrise Point-LP HD Audio
\-1f.4 Intel Corporation Sunrise Point-LP SMBus
$ lsusb -t
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 10000M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/7p, 5000M
|__ Port 2: Dev 3, If 0, Class=Vendor Specific Class, Driver=r8152, 5000M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/7p, 480M
|__ Port 5: Dev 3, If 1, Class=Audio, Driver=snd-usb-audio, 480M
|__ Port 5: Dev 3, If 2, Class=Audio, Driver=snd-usb-audio, 480M
|__ Port 5: Dev 3, If 0, Class=Audio, Driver=snd-usb-audio, 480M
|__ Port 5: Dev 3, If 3, Class=Audio, Driver=snd-usb-audio, 480M
|__ Port 6: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 6: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 6: Dev 4, If 2, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 7: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/12p, 480M
|__ Port 3: Dev 2, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 3: Dev 2, If 1, Class=Wireless, Driver=btusb, 12M
Thanks for having a look.
--
Mark Lord
Real-Time Remedies Inc.
mlord@...ox.com
Powered by blists - more mailing lists