[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190107212321.GK14960@codeaurora.org>
Date: Mon, 7 Jan 2019 14:23:21 -0700
From: Lina Iyer <ilina@...eaurora.org>
To: Evan Green <evgreen@...omium.org>
Cc: Stephen Boyd <swboyd@...omium.org>,
Andy Gross <andy.gross@...aro.org>,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
"Raju P.L.S.S.S.N" <rplsssn@...eaurora.org>,
Matthias Kaehlcke <mka@...omium.org>
Subject: Re: [PATCH] soc: qcom: rpmh: Avoid accessing freed memory from batch
API
On Fri, Jan 04 2019 at 14:02 -0700, Evan Green wrote:
>On Thu, Jan 3, 2019 at 9:47 AM Stephen Boyd <swboyd@...omium.org> wrote:
>>
>> Using the batch API from the interconnect driver sometimes leads to a
>> KASAN error due to an access to freed memory. This is easier to trigger
>> with threadirqs on the kernel commandline.
>>
>> BUG: KASAN: use-after-free in rpmh_tx_done+0x114/0x12c
>> Read of size 1 at addr fffffff51414ad84 by task irq/110-apps_rs/57
>>
>> CPU: 0 PID: 57 Comm: irq/110-apps_rs Tainted: G W 4.19.10 #72
>> Call trace:
>> dump_backtrace+0x0/0x2f8
>> show_stack+0x20/0x2c
>> __dump_stack+0x20/0x28
>> dump_stack+0xcc/0x10c
>> print_address_description+0x74/0x240
>> kasan_report+0x250/0x26c
>> __asan_report_load1_noabort+0x20/0x2c
>> rpmh_tx_done+0x114/0x12c
>> tcs_tx_done+0x450/0x768
>> irq_forced_thread_fn+0x58/0x9c
>> irq_thread+0x120/0x1dc
>> kthread+0x248/0x260
>> ret_from_fork+0x10/0x18
>>
>> Allocated by task 385:
>> kasan_kmalloc+0xac/0x148
>> __kmalloc+0x170/0x1e4
>> rpmh_write_batch+0x174/0x540
>> qcom_icc_set+0x8dc/0x9ac
>> icc_set+0x288/0x2e8
>> a6xx_gmu_stop+0x320/0x3c0
>> a6xx_pm_suspend+0x108/0x124
>> adreno_suspend+0x50/0x60
>> pm_generic_runtime_suspend+0x60/0x78
>> __rpm_callback+0x214/0x32c
>> rpm_callback+0x54/0x184
>> rpm_suspend+0x3f8/0xa90
>> pm_runtime_work+0xb4/0x178
>> process_one_work+0x544/0xbc0
>> worker_thread+0x514/0x7d0
>> kthread+0x248/0x260
>> ret_from_fork+0x10/0x18
>>
>> Freed by task 385:
>> __kasan_slab_free+0x12c/0x1e0
>> kasan_slab_free+0x10/0x1c
>> kfree+0x134/0x588
>> rpmh_write_batch+0x49c/0x540
>> qcom_icc_set+0x8dc/0x9ac
>> icc_set+0x288/0x2e8
>> a6xx_gmu_stop+0x320/0x3c0
>> a6xx_pm_suspend+0x108/0x124
>> adreno_suspend+0x50/0x60
>> cr50_spi spi5.0: SPI transfer timed out
>> pm_generic_runtime_suspend+0x60/0x78
>> __rpm_callback+0x214/0x32c
>> rpm_callback+0x54/0x184
>> rpm_suspend+0x3f8/0xa90
>> pm_runtime_work+0xb4/0x178
>> process_one_work+0x544/0xbc0
>> worker_thread+0x514/0x7d0
>> kthread+0x248/0x260
>> ret_from_fork+0x10/0x18
>>
>> The buggy address belongs to the object at fffffff51414ac80
>> which belongs to the cache kmalloc-512 of size 512
>> The buggy address is located 260 bytes inside of
>> 512-byte region [fffffff51414ac80, fffffff51414ae80)
>> The buggy address belongs to the page:
>> page:ffffffbfd4505200 count:1 mapcount:0 mapping:fffffff51e00c680 index:0x0 compound_mapcount: 0
>> flags: 0x4000000000008100(slab|head)
>> raw: 4000000000008100 ffffffbfd4529008 ffffffbfd44f9208 fffffff51e00c680
>> raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
>> page dumped because: kasan: bad access detected
>>
>> Memory state around the buggy address:
>> fffffff51414ac80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>> fffffff51414ad00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>> >fffffff51414ad80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>> ^
>> fffffff51414ae00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>> fffffff51414ae80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>>
>> The batch API sets the same completion for each rpmh message that's sent
>> and then loops through all the messages and waits for that single
>> completion declared on the stack to be completed before returning from
>> the function and freeing the message structures. Unfortunately, some
>> messages may still be in process and 'stuck' in the TCS. At some later
>> point, the tcs_tx_done() interrupt will run and try to process messages
>> that have already been freed at the end of rpmh_write_batch(). This will
>> in turn access the 'needs_free' member of the rpmh_request structure and
>> cause KASAN to complain.
>>
>> Let's fix this by allocating a chunk of completions for each message and
>> waiting for all of them to be completed before returning from the batch
>> API. Alternatively, we could wait for the last message in the batch, but
>> that may be a more complicated change because it looks like
>> tcs_tx_done() just iterates through the indices of the queue and
>> completes each message instead of tracking the last inserted message and
>> completing that first.
>>
>> Cc: Lina Iyer <ilina@...eaurora.org>
>> Cc: "Raju P.L.S.S.S.N" <rplsssn@...eaurora.org>
>> Cc: Matthias Kaehlcke <mka@...omium.org>
>> Cc: Evan Green <evgreen@...omium.org>
>> Fixes: c8790cb6da58 ("drivers: qcom: rpmh: add support for batch RPMH request")
>> Signed-off-by: Stephen Boyd <swboyd@...omium.org>
>> ---
>> drivers/soc/qcom/rpmh.c | 25 +++++++++++++++++--------
>> 1 file changed, 17 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/soc/qcom/rpmh.c b/drivers/soc/qcom/rpmh.c
>> index c7beb6841289..3b3e8b0b2d95 100644
>> --- a/drivers/soc/qcom/rpmh.c
>> +++ b/drivers/soc/qcom/rpmh.c
>> @@ -348,11 +348,12 @@ int rpmh_write_batch(const struct device *dev, enum rpmh_state state,
>> {
>> struct batch_cache_req *req;
>> struct rpmh_request *rpm_msgs;
>> - DECLARE_COMPLETION_ONSTACK(compl);
>> + struct completion *compls;
>> struct rpmh_ctrlr *ctrlr = get_rpmh_ctrlr(dev);
>> unsigned long time_left;
>> int count = 0;
>> int ret, i, j;
>> + void *ptr;
>>
>> if (!cmd || !n)
>> return -EINVAL;
>> @@ -362,10 +363,15 @@ int rpmh_write_batch(const struct device *dev, enum rpmh_state state,
>> if (!count)
>> return -EINVAL;
>>
>> - req = kzalloc(sizeof(*req) + count * sizeof(req->rpm_msgs[0]),
>> + ptr = kzalloc(sizeof(*req) +
>> + count * (sizeof(req->rpm_msgs[0]) + sizeof(*compls)),
>> GFP_ATOMIC);
>> - if (!req)
>> + if (!ptr)
>> return -ENOMEM;
>> +
>> + req = ptr;
>> + compls = ptr + sizeof(*req) + count * sizeof(*rpm_msgs);
>> +
>> req->count = count;
>> rpm_msgs = req->rpm_msgs;
>>
>> @@ -380,7 +386,10 @@ int rpmh_write_batch(const struct device *dev, enum rpmh_state state,
>> }
>>
>> for (i = 0; i < count; i++) {
>> - rpm_msgs[i].completion = &compl;
>> + struct completion *compl = &compls[i];
>> +
>> + init_completion(compl);
>> + rpm_msgs[i].completion = compl;
>> ret = rpmh_rsc_send_data(ctrlr_to_drv(ctrlr), &rpm_msgs[i].msg);
>> if (ret) {
>> pr_err("Error(%d) sending RPMH message addr=%#x\n",
>
>It's a little weird that we call rpmh_tx_done on a bunch of transfers
>we never submitted, just so the completion will get signaled so we can
>wait on it in the next loop. We could just do count = i; break; here
>instead.
>
It seems like it was carried over from my earlier submissions, where I
was reference counting the number of completions for a batch. I beleive,
with what we are doing here, we don't need to call tx_done with this
approach.
>> @@ -393,12 +402,12 @@ int rpmh_write_batch(const struct device *dev, enum rpmh_state state,
>>
>> time_left = RPMH_TIMEOUT_MS;
>> for (i = 0; i < count; i++) {
>> - time_left = wait_for_completion_timeout(&compl, time_left);
>> + time_left = wait_for_completion_timeout(&compls[i], time_left);
>
>So we give RPMH_TIMEOUT_MS for all the completions to finish. I wonder
>if it would be better to have that as RPMH_TIMEOUT_MS per completion.
>
That would work too. RPMH_TIMEOUT_MS is a large number that it should
not be a problem with this approach either.
Thanks,
Lina
Powered by blists - more mailing lists