linux-kernel - [PATCH v2 5/5] ARM: dts: qcom: msm8974: add interrupt controller properties

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190107021145.6370-6-masneyb@onstation.org>
Date:   Sun,  6 Jan 2019 21:11:45 -0500
From:   Brian Masney <masneyb@...tation.org>
To:     linus.walleij@...aro.org, sboyd@...nel.org,
        bjorn.andersson@...aro.org, andy.gross@...aro.org,
        lee.jones@...aro.org
Cc:     marc.zyngier@....com, shawnguo@...nel.org, dianders@...omium.org,
        linux-gpio@...r.kernel.org, nicolas.dechesne@...aro.org,
        niklas.cassel@...aro.org, david.brown@...aro.org,
        robh+dt@...nel.org, mark.rutland@....com, thierry.reding@...il.com,
        linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org
Subject: [PATCH v2 5/5] ARM: dts: qcom: msm8974: add interrupt controller properties

Add interrupt controller properties now that spmi-gpio is a proper
hierarchical IRQ chip. The interrupts property is no longer needed so
remove it.

Signed-off-by: Brian Masney <masneyb@...tation.org>
---
Changes since v1:
- Interrupts are now two cells instead of four cells.
- Drop unnecessary interrupts property.

 arch/arm/boot/dts/qcom-pm8941.dtsi | 39 +++---------------------------
 1 file changed, 3 insertions(+), 36 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index 2515c5c217ac..16e6b4272d16 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -64,42 +64,9 @@
 			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
-				     <0 0xc1 0 IRQ_TYPE_NONE>,
-				     <0 0xc2 0 IRQ_TYPE_NONE>,
-				     <0 0xc3 0 IRQ_TYPE_NONE>,
-				     <0 0xc4 0 IRQ_TYPE_NONE>,
-				     <0 0xc5 0 IRQ_TYPE_NONE>,
-				     <0 0xc6 0 IRQ_TYPE_NONE>,
-				     <0 0xc7 0 IRQ_TYPE_NONE>,
-				     <0 0xc8 0 IRQ_TYPE_NONE>,
-				     <0 0xc9 0 IRQ_TYPE_NONE>,
-				     <0 0xca 0 IRQ_TYPE_NONE>,
-				     <0 0xcb 0 IRQ_TYPE_NONE>,
-				     <0 0xcc 0 IRQ_TYPE_NONE>,
-				     <0 0xcd 0 IRQ_TYPE_NONE>,
-				     <0 0xce 0 IRQ_TYPE_NONE>,
-				     <0 0xcf 0 IRQ_TYPE_NONE>,
-				     <0 0xd0 0 IRQ_TYPE_NONE>,
-				     <0 0xd1 0 IRQ_TYPE_NONE>,
-				     <0 0xd2 0 IRQ_TYPE_NONE>,
-				     <0 0xd3 0 IRQ_TYPE_NONE>,
-				     <0 0xd4 0 IRQ_TYPE_NONE>,
-				     <0 0xd5 0 IRQ_TYPE_NONE>,
-				     <0 0xd6 0 IRQ_TYPE_NONE>,
-				     <0 0xd7 0 IRQ_TYPE_NONE>,
-				     <0 0xd8 0 IRQ_TYPE_NONE>,
-				     <0 0xd9 0 IRQ_TYPE_NONE>,
-				     <0 0xda 0 IRQ_TYPE_NONE>,
-				     <0 0xdb 0 IRQ_TYPE_NONE>,
-				     <0 0xdc 0 IRQ_TYPE_NONE>,
-				     <0 0xdd 0 IRQ_TYPE_NONE>,
-				     <0 0xde 0 IRQ_TYPE_NONE>,
-				     <0 0xdf 0 IRQ_TYPE_NONE>,
-				     <0 0xe0 0 IRQ_TYPE_NONE>,
-				     <0 0xe1 0 IRQ_TYPE_NONE>,
-				     <0 0xe2 0 IRQ_TYPE_NONE>,
-				     <0 0xe3 0 IRQ_TYPE_NONE>;
+			interrupt-parent = <&spmi_bus>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 
 			boost_bypass_n_pin: boost-bypass {
 				pins = "gpio21";
-- 
2.17.2