linux-kernel - [PATCH v2 0/5] qcom: spmi: add support for hierarchical IRQ chip

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190107021145.6370-1-masneyb@onstation.org>
Date:   Sun,  6 Jan 2019 21:11:40 -0500
From:   Brian Masney <masneyb@...tation.org>
To:     linus.walleij@...aro.org, sboyd@...nel.org,
        bjorn.andersson@...aro.org, andy.gross@...aro.org,
        lee.jones@...aro.org
Cc:     marc.zyngier@....com, shawnguo@...nel.org, dianders@...omium.org,
        linux-gpio@...r.kernel.org, nicolas.dechesne@...aro.org,
        niklas.cassel@...aro.org, david.brown@...aro.org,
        robh+dt@...nel.org, mark.rutland@....com, thierry.reding@...il.com,
        linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org
Subject: [PATCH v2 0/5] qcom: spmi: add support for hierarchical IRQ chip

This patch series adds hierarchical IRQ chip support to spmi-gpio so
that device tree consumers can request an IRQ directly from the GPIO
block rather than having to request an IRQ from the underlying PMIC.
The first two patches in this series removes some IRQ count code that
was causing the IRQs to be prematurely initialized. Patch three
converts pmic-arb to use the version 2 IRQ interface. Patches 4/5
add support for the hierarchical IRQ chip to spmi-gpio.

For more background information, see the email thread with Linus
Walleij's excellent description of the problem at
https://www.spinics.net/lists/linux-gpio/msg34655.html.

Patches 3-5 need to be applied in the order that are presented here in
order to allow for a proper bisection. Patch 5 depends on the presence
of 1-4. Part of the series can be applied without any breakage.

This work was tested on a LG Nexus 5 (hammerhead) phone. My status page
at https://masneyb.github.io/nexus-5-upstream/ describes what is working
so far with an upstream kernel.

High-level changes since v1:
- Patches 1 and 2 are new. This brought in a third subsystem (mfd).
- I have detailed changelogs attached to the notes on patches 3-5.

Brian Masney (5):
  spmi: pmic-arb: hardcode IRQ counts
  mfd: qcom-spmi-pmic: use devm_mfd_add_devices instead of
    devm_of_platform_populate
  spmi: pmic-arb: convert to v2 irq interfaces to support hierarchical
    IRQ chips
  qcom: spmi-gpio: add support for hierarchical IRQ chip
  ARM: dts: qcom: msm8974: add interrupt controller properties

 arch/arm/boot/dts/qcom-pm8941.dtsi       |  39 +-----
 drivers/mfd/Kconfig                      |   1 +
 drivers/mfd/qcom-spmi-pmic.c             |  61 ++++++++-
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 160 +++++++++++++++++++----
 drivers/spmi/spmi-pmic-arb.c             |  58 +++++---
 5 files changed, 233 insertions(+), 86 deletions(-)

-- 
2.17.2