linux-kernel - [RFC 3/4] media: dt-bindings: add DS90UB954-Q1 video deserializer

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190108223953.9969-4-luca@lucaceresoli.net>
Date:   Tue,  8 Jan 2019 23:39:52 +0100
From:   Luca Ceresoli <luca@...aceresoli.net>
To:     linux-media@...r.kernel.org
Cc:     Luca Ceresoli <luca@...aceresoli.net>,
        Kieran Bingham <kieran.bingham@...asonboard.com>,
        Laurent Pinchart <laurent.pinchart@...asonboard.com>,
        jacopo mondi <jacopo@...ndi.org>,
        Vladimir Zapolskiy <vz@...ia.com>,
        Wolfram Sang <wsa@...-dreams.de>,
        Peter Rosin <peda@...ntia.se>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-i2c@...r.kernel.org
Subject: [RFC 3/4] media: dt-bindings: add DS90UB954-Q1 video deserializer

This is a first, tentative DT layout to describe a 2-input video
deserializer with I2C Address Translator and remote GPIOs.

NOTES / TODO:
 * This GPIOs representation is not realistic, it has been used only
   to test that thing work. It shall be rewritten properly.

Signed-off-by: Luca Ceresoli <luca@...aceresoli.net>
---
 .../bindings/media/ti,ds90ub954-q1.txt        | 151 ++++++++++++++++++
 1 file changed, 151 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/ti,ds90ub954-q1.txt

diff --git a/Documentation/devicetree/bindings/media/ti,ds90ub954-q1.txt b/Documentation/devicetree/bindings/media/ti,ds90ub954-q1.txt
new file mode 100644
index 000000000000..3024ef2df100
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/ti,ds90ub954-q1.txt
@@ -0,0 +1,151 @@
+Texas Instruments DS90UB954-Q1 dual video Deserializer
+======================================================
+
+Required properties:
+
+ - compatible: must be "ti,ds90ub954-q1"
+ - reg: I2C bus address of the chip (0x30..0xdd, based on strapping options)
+ - reset-gpios: chip reset GPIO, active low (connected to PDB pin of the chip)
+ - i2c-alias-pool: list of I2C addresses that are known to be available on the
+                   "local" (SoC-to-deser) I2C bus; they will be picked at
+		   runtime and used as aliases to reach remove I2C chips
+
+
+Required subnodes:
+ - ports: A ports node with one port child node per device input and output
+          port, in accordance with the video interface bindings defined in
+          Documentation/devicetree/bindings/media/video-interfaces.txt. The
+          port nodes are numbered as follows:
+
+          Port Description
+          -----------------------------
+          0    Input from FPD-Link 3 RX port 0
+          1    Input from FPD-Link 3 RX port 1
+          2    CSI-2 output
+ - gpios: *** this is a temporary test implementation, ignore it
+ - i2c-mux: contains one child per RX port, each generates an I2C adapter
+            representing the I2C bus on the remote side
+ - rxports: contains one child per RX port, each describes one FPD-Link 3 port
+            with these fields:
+	    - reg: the RX port index
+	    - ser-i2c-alias: the alias to access the remore serializer from
+	      the local bus
+	    - bc-gpio-map: maps backchannel GPIO numbers to local GPIO inputs
+	                   with pairs <fpd_gpio_number gpio_node>
+			   (TODO change when reimplementing the gpios subnode)
+
+
+Device node example
+-------------------
+
+&i2c0 {
+	deser@3d {
+		reg = <0x3d>;
+		compatible = "ti,ds90ub954-q1";
+		reset-gpios = <&gpio1 2 0>;
+
+		i2c-alias-pool = /bits/ 16 <0x20 0x21 0x22 0x23 0x24 0x25>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				ds90ub954_fpd3_in0: endpoint {
+					remote-endpoint = <&remote_sensor_0_out>;
+				};
+			};
+
+			// TODO enable both ports (and s/1/2/g in th MIPI port below)
+			// port@1 {
+			// 	reg = <1>;
+			// 	ds90ub954_fpd3_in1: endpoint {
+			// 		remote-endpoint = <&remote_sensor_1_out>;
+			// 	};
+			// };
+
+			port@1 {
+				reg = <1>;
+				ds90ub954_mipi_out0: endpoint {
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&csirx_0_in>;
+				};
+			};
+		};
+
+		gpios {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			// From sensor to CPU
+			gpio@0 {
+				reg = <0>;
+				output;
+				source = <0>; // RX port 0
+				function = <0>;
+			};
+
+			// CPU to sensor reset, active low
+			remote_sensor1_reset: gpio@1 {
+				reg = <1>;
+				input;
+			};
+		};
+
+		i2c-mux {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			remote_i2c0: i2c@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clock-frequency = <400000>;
+			};
+
+			remote_i2c1: i2c@1 {
+				reg = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clock-frequency = <400000>;
+			};
+		};
+
+		rxports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rxport@0 {
+				reg = <0>;
+				ser-i2c-alias = <0x3e>;
+
+				/* Map BC GPIO numbers to local GPIO inputs */
+				bc-gpio-map = <1 &remote_sensor1_reset>;
+			};
+
+			rxport@1 {
+				reg = <1>;
+				ser-i2c-alias = <0x3f>;
+			};
+		};
+	};
+};
+
+&remote_i2c0 {
+	remote_sensor0@1a {
+		reg = <0x1a>;
+		compatible = "sony,imx274";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reset-gpios = <&gpio1 4 0>;
+
+		port@0 {
+			reg = <0>;
+			remote_sensor_0_out: endpoint {
+				remote-endpoint = <&ds90ub954_fpd3_in0>;
+			};
+		};
+	};
+};
-- 
2.17.1