| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190108175818.705110-5-lkundrak@v3.sk>
Date: Tue, 8 Jan 2019 18:58:07 +0100
From: Lubomir Rintel <lkundrak@...sk>
To: Andy Shevchenko <andy@...radead.org>,
Darren Hart <dvhart@...radead.org>,
platform-driver-x86@...r.kernel.org,
Russell King <linux@...linux.org.uk>
Cc: James Cameron <quozl@...top.org>,
Mark Rutland <mark.rutland@....com>,
Pavel Machek <pavel@....cz>, Rob Herring <robh+dt@...nel.org>,
Sebastian Reichel <sre@...nel.org>, x86@...nel.org,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org,
Lubomir Rintel <lkundrak@...sk>
Subject: [PATCH v4 04/15] Platform: OLPC: Add XO-1.75 EC driver
It's based off the driver from the OLPC kernel sources. Somewhat
modernized and cleaned up, for better or worse.
Modified to plug into the olpc-ec driver infrastructure (so that battery
interface and debugfs could be reused) and the SPI slave framework.
Signed-off-by: Lubomir Rintel <lkundrak@...sk>
---
Changes since v3:
- Introduce CONFIG_OLPC_EC symbol to enable parts common to this driver
and the X86 OLPC EC machinery.
Changes since v1:
- Cosmetic style changes; whitespace, ordering of declarations and
#includes, remoted extra comas from sentinels
- Count the terminating NUL in LOG_BUF_SIZE
- Make olpc_xo175_ec_is_valid_cmd() return -EINVAL instead of -1
on error
- Spell keyboard/touchpad in full for CHAN_KEYBOARD/TOUCHPAD messages
- Use a #define for PM wakeup processing time
- Log a message on unknown event
- Escape logging payload with %*pE
- Replace an open-coded min()
- Correct an error code on short read
- replaced PM callback #ifdefs with __maybe_unusedm SET_RUNTIME_PM_OPS
and SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
- dev_get_drvdata() instead of a round-trip through platform device
- s/unsigned char x/u8 x/ in olpc_xo175_ec_resume()
- Use GENMASK() instead of 0xffff for the event mask
- Replace cmd tx/resp rx buffers with structures
- Turned suspend hint arguments into a struct, and tidied up the comment
Basically all of the above is based on the review by Andy Shevchenko.
arch/x86/Kconfig | 1 +
drivers/platform/Kconfig | 2 +
drivers/platform/Makefile | 2 +-
drivers/platform/olpc/Kconfig | 14 +
drivers/platform/olpc/Makefile | 3 +-
drivers/platform/olpc/olpc-xo175-ec.c | 763 ++++++++++++++++++++++++++
include/linux/olpc-ec.h | 4 +-
7 files changed, 785 insertions(+), 4 deletions(-)
create mode 100644 drivers/platform/olpc/Kconfig
create mode 100644 drivers/platform/olpc/olpc-xo175-ec.c
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 6185d4f33296..29063be6fa22 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2714,6 +2714,7 @@ config OLPC
select OF
select OF_PROMTREE
select IRQ_DOMAIN
+ select OLPC_EC
---help---
Add support for detecting the unique features of the OLPC
XO hardware.
diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig
index d4c2e424a700..4313d73d3618 100644
--- a/drivers/platform/Kconfig
+++ b/drivers/platform/Kconfig
@@ -10,3 +10,5 @@ source "drivers/platform/goldfish/Kconfig"
source "drivers/platform/chrome/Kconfig"
source "drivers/platform/mellanox/Kconfig"
+
+source "drivers/platform/olpc/Kconfig"
diff --git a/drivers/platform/Makefile b/drivers/platform/Makefile
index 4b2ce58bcd9c..6fda58c021ca 100644
--- a/drivers/platform/Makefile
+++ b/drivers/platform/Makefile
@@ -6,6 +6,6 @@
obj-$(CONFIG_X86) += x86/
obj-$(CONFIG_MELLANOX_PLATFORM) += mellanox/
obj-$(CONFIG_MIPS) += mips/
-obj-$(CONFIG_OLPC) += olpc/
+obj-$(CONFIG_OLPC_EC) += olpc/
obj-$(CONFIG_GOLDFISH) += goldfish/
obj-$(CONFIG_CHROME_PLATFORMS) += chrome/
diff --git a/drivers/platform/olpc/Kconfig b/drivers/platform/olpc/Kconfig
new file mode 100644
index 000000000000..066e439bf4fc
--- /dev/null
+++ b/drivers/platform/olpc/Kconfig
@@ -0,0 +1,14 @@
+config OLPC_EC
+ bool
+
+config OLPC_XO175_EC
+ tristate "OLPC XO 1.75 Embedded Controller"
+ depends on ARM && (ARCH_MMP || COMPILE_TEST)
+ select SPI_SLAVE
+ select OLPC_EC
+ help
+ Include support for the OLPC XO Embedded Controller (EC). The EC
+ provides various platform services, including support for the power,
+ button, restart, shutdown and battery charging status.
+
+ Unless you have an OLPC XO laptop, you will want to say N.
diff --git a/drivers/platform/olpc/Makefile b/drivers/platform/olpc/Makefile
index dc8b26bc7209..01fe6ba01665 100644
--- a/drivers/platform/olpc/Makefile
+++ b/drivers/platform/olpc/Makefile
@@ -1,4 +1,5 @@
#
# OLPC XO platform-specific drivers
#
-obj-$(CONFIG_OLPC) += olpc-ec.o
+obj-$(CONFIG_OLPC_EC) += olpc-ec.o
+obj-$(CONFIG_OLPC_XO175_EC) += olpc-xo175-ec.o
diff --git a/drivers/platform/olpc/olpc-xo175-ec.c b/drivers/platform/olpc/olpc-xo175-ec.c
new file mode 100644
index 000000000000..74db06bacc44
--- /dev/null
+++ b/drivers/platform/olpc/olpc-xo175-ec.c
@@ -0,0 +1,763 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for the OLPC XO-1.75 Embedded Controller.
+ *
+ * The EC protocol is documented at:
+ * http://wiki.laptop.org/go/XO_1.75_HOST_to_EC_Protocol
+ *
+ * Copyright (C) 2010 One Laptop per Child Foundation.
+ * Copyright (C) 2018 Lubomir Rintel <lkundrak@...sk>
+ */
+
+#include <linux/completion.h>
+#include <linux/ctype.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/input.h>
+#include <linux/kfifo.h>
+#include <linux/module.h>
+#include <linux/olpc-ec.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/spi/spi.h>
+#include <asm/system_misc.h>
+
+struct ec_cmd_t {
+ u8 cmd;
+ u8 bytes_returned;
+};
+
+enum ec_chan_t {
+ CHAN_NONE = 0,
+ CHAN_SWITCH,
+ CHAN_CMD_RESP,
+ CHAN_KEYBOARD,
+ CHAN_TOUCHPAD,
+ CHAN_EVENT,
+ CHAN_DEBUG,
+ CHAN_CMD_ERROR,
+};
+
+/*
+ * EC events
+ */
+#define EVENT_AC_CHANGE 1 /* AC plugged/unplugged */
+#define EVENT_BATTERY_STATUS 2 /* Battery low/full/error/gone */
+#define EVENT_BATTERY_CRITICAL 3 /* Battery critical voltage */
+#define EVENT_BATTERY_SOC_CHANGE 4 /* 1% SOC Change */
+#define EVENT_BATTERY_ERROR 5 /* Abnormal error, query for cause */
+#define EVENT_POWER_PRESSED 6 /* Power button was pressed */
+#define EVENT_POWER_PRESS_WAKE 7 /* Woken up with a power button */
+#define EVENT_TIMED_HOST_WAKE 8 /* Host wake timer */
+#define EVENT_OLS_HIGH_LIMIT 9 /* OLS crossed dark threshold */
+#define EVENT_OLS_LOW_LIMIT 10 /* OLS crossed light threshold */
+
+/*
+ * EC commands
+ * (from http://dev.laptop.org/git/users/rsmith/ec-1.75/tree/ec_cmd.h)
+ */
+#define CMD_GET_API_VERSION 0x08 /* out: u8 */
+#define CMD_READ_VOLTAGE 0x10 /* out: u16, *9.76/32, mV */
+#define CMD_READ_CURRENT 0x11 /* out: s16, *15.625/120, mA */
+#define CMD_READ_ACR 0x12 /* out: s16, *6250/15, uAh */
+#define CMD_READ_BATT_TEMPERATURE 0x13 /* out: u16, *100/256, deg C */
+#define CMD_READ_AMBIENT_TEMPERATURE 0x14 /* unimplemented, no hardware */
+#define CMD_READ_BATTERY_STATUS 0x15 /* out: u8, bitmask */
+#define CMD_READ_SOC 0x16 /* out: u8, percentage */
+#define CMD_READ_GAUGE_ID 0x17 /* out: u8 * 8 */
+#define CMD_READ_GAUGE_DATA 0x18 /* in: u8 addr, out: u8 data */
+#define CMD_READ_BOARD_ID 0x19 /* out: u16 (platform id) */
+#define CMD_READ_BATT_ERR_CODE 0x1f /* out: u8, error bitmask */
+#define CMD_SET_DCON_POWER 0x26 /* in: u8 */
+#define CMD_RESET_EC 0x28 /* none */
+#define CMD_READ_BATTERY_TYPE 0x2c /* out: u8 */
+#define CMD_SET_AUTOWAK 0x33 /* out: u8 */
+#define CMD_SET_EC_WAKEUP_TIMER 0x36 /* in: u32, out: ? */
+#define CMD_READ_EXT_SCI_MASK 0x37 /* ? */
+#define CMD_WRITE_EXT_SCI_MASK 0x38 /* ? */
+#define CMD_CLEAR_EC_WAKEUP_TIMER 0x39 /* none */
+#define CMD_ENABLE_RUNIN_DISCHARGE 0x3B /* none */
+#define CMD_DISABLE_RUNIN_DISCHARGE 0x3C /* none */
+#define CMD_READ_MPPT_ACTIVE 0x3d /* out: u8 */
+#define CMD_READ_MPPT_LIMIT 0x3e /* out: u8 */
+#define CMD_SET_MPPT_LIMIT 0x3f /* in: u8 */
+#define CMD_DISABLE_MPPT 0x40 /* none */
+#define CMD_ENABLE_MPPT 0x41 /* none */
+#define CMD_READ_VIN 0x42 /* out: u16 */
+#define CMD_EXT_SCI_QUERY 0x43 /* ? */
+#define RSP_KEYBOARD_DATA 0x48 /* ? */
+#define RSP_TOUCHPAD_DATA 0x49 /* ? */
+#define CMD_GET_FW_VERSION 0x4a /* out: u8 * 16 */
+#define CMD_POWER_CYCLE 0x4b /* none */
+#define CMD_POWER_OFF 0x4c /* none */
+#define CMD_RESET_EC_SOFT 0x4d /* none */
+#define CMD_READ_GAUGE_U16 0x4e /* ? */
+#define CMD_ENABLE_MOUSE 0x4f /* ? */
+#define CMD_ECHO 0x52 /* in: u8 * 5, out: u8 * 5 */
+#define CMD_GET_FW_DATE 0x53 /* out: u8 * 16 */
+#define CMD_GET_FW_USER 0x54 /* out: u8 * 16 */
+#define CMD_TURN_OFF_POWER 0x55 /* none (same as 0x4c) */
+#define CMD_READ_OLS 0x56 /* out: u16 */
+#define CMD_OLS_SMT_LEDON 0x57 /* none */
+#define CMD_OLS_SMT_LEDOFF 0x58 /* none */
+#define CMD_START_OLS_ASSY 0x59 /* none */
+#define CMD_STOP_OLS_ASSY 0x5a /* none */
+#define CMD_OLS_SMTTEST_STOP 0x5b /* none */
+#define CMD_READ_VIN_SCALED 0x5c /* out: u16 */
+#define CMD_READ_BAT_MIN_W 0x5d /* out: u16 */
+#define CMD_READ_BAR_MAX_W 0x5e /* out: u16 */
+#define CMD_RESET_BAT_MINMAX_W 0x5f /* none */
+#define CMD_READ_LOCATION 0x60 /* in: u16 addr, out: u8 data */
+#define CMD_WRITE_LOCATION 0x61 /* in: u16 addr, u8 data */
+#define CMD_KEYBOARD_CMD 0x62 /* in: u8, out: ? */
+#define CMD_TOUCHPAD_CMD 0x63 /* in: u8, out: ? */
+#define CMD_GET_FW_HASH 0x64 /* out: u8 * 16 */
+#define CMD_SUSPEND_HINT 0x65 /* in: u8 */
+#define CMD_ENABLE_WAKE_TIMER 0x66 /* in: u8 */
+#define CMD_SET_WAKE_TIMER 0x67 /* in: 32 */
+#define CMD_ENABLE_WAKE_AUTORESET 0x68 /* in: u8 */
+#define CMD_OLS_SET_LIMITS 0x69 /* in: u16, u16 */
+#define CMD_OLS_GET_LIMITS 0x6a /* out: u16, u16 */
+#define CMD_OLS_SET_CEILING 0x6b /* in: u16 */
+#define CMD_OLS_GET_CEILING 0x6c /* out: u16 */
+
+/*
+ * Accepted EC commands, and how many bytes they return. There are plenty
+ * of EC commands that are no longer implemented, or are implemented only on
+ * certain older boards.
+ */
+static const struct ec_cmd_t olpc_xo175_ec_cmds[] = {
+ { CMD_GET_API_VERSION, 1 },
+ { CMD_READ_VOLTAGE, 2 },
+ { CMD_READ_CURRENT, 2 },
+ { CMD_READ_ACR, 2 },
+ { CMD_READ_BATT_TEMPERATURE, 2 },
+ { CMD_READ_BATTERY_STATUS, 1 },
+ { CMD_READ_SOC, 1 },
+ { CMD_READ_GAUGE_ID, 8 },
+ { CMD_READ_GAUGE_DATA, 1 },
+ { CMD_READ_BOARD_ID, 2 },
+ { CMD_READ_BATT_ERR_CODE, 1 },
+ { CMD_SET_DCON_POWER, 0 },
+ { CMD_RESET_EC, 0 },
+ { CMD_READ_BATTERY_TYPE, 1 },
+ { CMD_ENABLE_RUNIN_DISCHARGE, 0 },
+ { CMD_DISABLE_RUNIN_DISCHARGE, 0 },
+ { CMD_READ_MPPT_ACTIVE, 1 },
+ { CMD_READ_MPPT_LIMIT, 1 },
+ { CMD_SET_MPPT_LIMIT, 0 },
+ { CMD_DISABLE_MPPT, 0 },
+ { CMD_ENABLE_MPPT, 0 },
+ { CMD_READ_VIN, 2 },
+ { CMD_GET_FW_VERSION, 16 },
+ { CMD_POWER_CYCLE, 0 },
+ { CMD_POWER_OFF, 0 },
+ { CMD_RESET_EC_SOFT, 0 },
+ { CMD_ECHO, 5 },
+ { CMD_GET_FW_DATE, 16 },
+ { CMD_GET_FW_USER, 16 },
+ { CMD_TURN_OFF_POWER, 0 },
+ { CMD_READ_OLS, 2 },
+ { CMD_OLS_SMT_LEDON, 0 },
+ { CMD_OLS_SMT_LEDOFF, 0 },
+ { CMD_START_OLS_ASSY, 0 },
+ { CMD_STOP_OLS_ASSY, 0 },
+ { CMD_OLS_SMTTEST_STOP, 0 },
+ { CMD_READ_VIN_SCALED, 2 },
+ { CMD_READ_BAT_MIN_W, 2 },
+ { CMD_READ_BAR_MAX_W, 2 },
+ { CMD_RESET_BAT_MINMAX_W, 0 },
+ { CMD_READ_LOCATION, 1 },
+ { CMD_WRITE_LOCATION, 0 },
+ { CMD_GET_FW_HASH, 16 },
+ { CMD_SUSPEND_HINT, 0 },
+ { CMD_ENABLE_WAKE_TIMER, 0 },
+ { CMD_SET_WAKE_TIMER, 0 },
+ { CMD_ENABLE_WAKE_AUTORESET, 0 },
+ { CMD_OLS_SET_LIMITS, 0 },
+ { CMD_OLS_GET_LIMITS, 4 },
+ { CMD_OLS_SET_CEILING, 0 },
+ { CMD_OLS_GET_CEILING, 2 },
+ { CMD_READ_EXT_SCI_MASK, 2 },
+ { CMD_WRITE_EXT_SCI_MASK, 0 },
+
+ { }
+};
+
+#define EC_MAX_CMD_DATA_LEN 5
+#define EC_MAX_RESP_LEN 16
+
+#define LOG_BUF_SIZE 128
+
+#define PM_WAKEUP_TIME 1000
+
+#define EC_ALL_EVENTS GENMASK(15, 0)
+
+enum ec_state_t {
+ CMD_STATE_IDLE = 0,
+ CMD_STATE_WAITING_FOR_SWITCH,
+ CMD_STATE_CMD_IN_TX_FIFO,
+ CMD_STATE_CMD_SENT,
+ CMD_STATE_RESP_RECEIVED,
+ CMD_STATE_ERROR_RECEIVED,
+};
+
+struct olpc_xo175_ec_cmd {
+ u8 command;
+ u8 nr_args;
+ u8 data_len;
+ u8 args[EC_MAX_CMD_DATA_LEN];
+};
+
+struct olpc_xo175_ec_resp {
+ u8 channel;
+ u8 byte;
+};
+
+struct olpc_xo175_ec {
+ bool suspended;
+
+ /* SPI related stuff. */
+ struct spi_device *spi;
+ struct spi_transfer xfer;
+ struct spi_message msg;
+ union {
+ struct olpc_xo175_ec_cmd cmd;
+ struct olpc_xo175_ec_resp resp;
+ } tx_buf, rx_buf;
+
+ /* GPIO for the CMD signals. */
+ struct gpio_desc *gpio_cmd;
+
+ /* Command handling related state. */
+ spinlock_t cmd_state_lock;
+ int cmd_state;
+ bool cmd_running;
+ struct completion cmd_done;
+ struct olpc_xo175_ec_cmd cmd;
+ u8 resp_data[EC_MAX_RESP_LEN];
+ int expected_resp_len;
+ int resp_len;
+
+ /* Power button. */
+ struct input_dev *pwrbtn;
+
+ /* Debug handling. */
+ char logbuf[LOG_BUF_SIZE];
+ int logbuf_len;
+};
+
+static struct platform_device *olpc_ec;
+
+static int olpc_xo175_ec_is_valid_cmd(u8 cmd)
+{
+ const struct ec_cmd_t *p;
+
+ for (p = olpc_xo175_ec_cmds; p->cmd; p++) {
+ if (p->cmd == cmd)
+ return p->bytes_returned;
+ }
+
+ return -EINVAL;
+}
+
+static void olpc_xo175_ec_flush_logbuf(struct olpc_xo175_ec *priv)
+{
+ dev_dbg(&priv->spi->dev, "got debug string [%*pE]\n",
+ priv->logbuf_len, priv->logbuf);
+ priv->logbuf_len = 0;
+}
+
+static void olpc_xo175_ec_complete(void *arg);
+
+static void olpc_xo175_ec_send_command(struct olpc_xo175_ec *priv, void *cmd,
+ size_t cmdlen)
+{
+ int ret;
+
+ memcpy(&priv->tx_buf, cmd, cmdlen);
+ priv->xfer.len = cmdlen;
+
+ spi_message_init_with_transfers(&priv->msg, &priv->xfer, 1);
+
+ priv->msg.complete = olpc_xo175_ec_complete;
+ priv->msg.context = priv;
+
+ ret = spi_async(priv->spi, &priv->msg);
+ if (ret)
+ dev_err(&priv->spi->dev, "spi_async() failed %d\n", ret);
+}
+
+static void olpc_xo175_ec_read_packet(struct olpc_xo175_ec *priv)
+{
+ u8 nonce[] = {0xA5, 0x5A};
+
+ olpc_xo175_ec_send_command(priv, nonce, sizeof(nonce));
+}
+
+static void olpc_xo175_ec_complete(void *arg)
+{
+ struct olpc_xo175_ec *priv = arg;
+ struct device *dev = &priv->spi->dev;
+ struct power_supply *psy;
+ unsigned long flags;
+ u8 channel;
+ u8 byte;
+ int ret;
+
+ ret = priv->msg.status;
+ if (ret) {
+ dev_err(dev, "SPI transfer failed: %d\n", ret);
+
+ spin_lock_irqsave(&priv->cmd_state_lock, flags);
+ if (priv->cmd_running) {
+ priv->resp_len = 0;
+ priv->cmd_state = CMD_STATE_ERROR_RECEIVED;
+ complete(&priv->cmd_done);
+ }
+ spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
+
+ if (ret != -EINTR)
+ olpc_xo175_ec_read_packet(priv);
+
+ return;
+ }
+
+ channel = priv->rx_buf.resp.channel;
+ byte = priv->rx_buf.resp.byte;
+
+ switch (channel) {
+ case CHAN_NONE:
+ spin_lock_irqsave(&priv->cmd_state_lock, flags);
+
+ if (!priv->cmd_running) {
+ /* We can safely ignore these */
+ dev_err(dev, "spurious FIFO read packet\n");
+ spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
+ return;
+ }
+
+ priv->cmd_state = CMD_STATE_CMD_SENT;
+ if (!priv->expected_resp_len)
+ complete(&priv->cmd_done);
+ olpc_xo175_ec_read_packet(priv);
+
+ spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
+ return;
+
+ case CHAN_SWITCH:
+ spin_lock_irqsave(&priv->cmd_state_lock, flags);
+
+ if (!priv->cmd_running) {
+ /* Just go with the flow */
+ dev_err(dev, "spurious SWITCH packet\n");
+ memset(&priv->cmd, 0, sizeof(priv->cmd));
+ priv->cmd.command = CMD_ECHO;
+ }
+
+ priv->cmd_state = CMD_STATE_CMD_IN_TX_FIFO;
+
+ /* Throw command into TxFIFO */
+ gpiod_set_value_cansleep(priv->gpio_cmd, 0);
+ olpc_xo175_ec_send_command(priv, &priv->cmd, sizeof(priv->cmd));
+
+ spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
+ return;
+
+ case CHAN_CMD_RESP:
+ spin_lock_irqsave(&priv->cmd_state_lock, flags);
+
+ if (!priv->cmd_running) {
+ dev_err(dev, "spurious response packet\n");
+ } else if (priv->resp_len >= priv->expected_resp_len) {
+ dev_err(dev, "too many response packets\n");
+ } else {
+ priv->resp_data[priv->resp_len++] = byte;
+ if (priv->resp_len == priv->expected_resp_len) {
+ priv->cmd_state = CMD_STATE_RESP_RECEIVED;
+ complete(&priv->cmd_done);
+ }
+ }
+
+ spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
+ break;
+
+ case CHAN_CMD_ERROR:
+ spin_lock_irqsave(&priv->cmd_state_lock, flags);
+
+ if (!priv->cmd_running) {
+ dev_err(dev, "spurious cmd error packet\n");
+ } else {
+ priv->resp_data[0] = byte;
+ priv->resp_len = 1;
+ priv->cmd_state = CMD_STATE_ERROR_RECEIVED;
+ complete(&priv->cmd_done);
+ }
+ spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
+ break;
+
+ case CHAN_KEYBOARD:
+ dev_warn(dev, "keyboard is not supported\n");
+ break;
+
+ case CHAN_TOUCHPAD:
+ dev_warn(dev, "touchpad is not supported\n");
+ break;
+
+ case CHAN_EVENT:
+ dev_dbg(dev, "got event %.2x\n", byte);
+ switch (byte) {
+ case EVENT_AC_CHANGE:
+ psy = power_supply_get_by_name("olpc-ac");
+ if (psy) {
+ power_supply_changed(psy);
+ power_supply_put(psy);
+ }
+ break;
+ case EVENT_BATTERY_STATUS:
+ case EVENT_BATTERY_CRITICAL:
+ case EVENT_BATTERY_SOC_CHANGE:
+ case EVENT_BATTERY_ERROR:
+ psy = power_supply_get_by_name("olpc-battery");
+ if (psy) {
+ power_supply_changed(psy);
+ power_supply_put(psy);
+ }
+ break;
+ case EVENT_POWER_PRESSED:
+ input_report_key(priv->pwrbtn, KEY_POWER, 1);
+ input_sync(priv->pwrbtn);
+ input_report_key(priv->pwrbtn, KEY_POWER, 0);
+ input_sync(priv->pwrbtn);
+ /* fall through */
+ case EVENT_POWER_PRESS_WAKE:
+ case EVENT_TIMED_HOST_WAKE:
+ pm_wakeup_event(priv->pwrbtn->dev.parent,
+ PM_WAKEUP_TIME);
+ break;
+ default:
+ dev_dbg(dev, "ignored unknown event %.2x\n", byte);
+ break;
+ }
+ break;
+
+ case CHAN_DEBUG:
+ if (byte == '\n') {
+ olpc_xo175_ec_flush_logbuf(priv);
+ } else if (isprint(byte)) {
+ priv->logbuf[priv->logbuf_len++] = byte;
+ if (priv->logbuf_len == LOG_BUF_SIZE)
+ olpc_xo175_ec_flush_logbuf(priv);
+ }
+ break;
+
+ default:
+ dev_warn(dev, "unknown channel: %d, %.2x\n", channel, byte);
+ break;
+ }
+
+ /* Most non-command packets get the TxFIFO refilled and an ACK. */
+ olpc_xo175_ec_read_packet(priv);
+}
+
+/*
+ * This function is protected with a mutex. We can safely assume that
+ * there will be only one instance of this function running at a time.
+ * One of the ways in which we enforce this is by waiting until we get
+ * all response bytes back from the EC, rather than just the number that
+ * the caller requests (otherwise, we might start a new command while an
+ * old command's response bytes are still incoming).
+ */
+static int olpc_xo175_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen, u8 *resp,
+ size_t resp_len, void *ec_cb_arg)
+{
+ struct olpc_xo175_ec *priv = ec_cb_arg;
+ struct device *dev = &priv->spi->dev;
+ unsigned long flags;
+ size_t nr_bytes;
+ int ret = 0;
+
+ dev_dbg(dev, "CMD %x, %d bytes expected\n", cmd, resp_len);
+
+ if (inlen > 5) {
+ dev_err(dev, "command len %d too big!\n", resp_len);
+ return -EOVERFLOW;
+ }
+
+ /* Suspending in the middle of an EC command hoses things badly! */
+ if (WARN_ON(priv->suspended))
+ return -EBUSY;
+
+ /* Ensure a valid command and return bytes */
+ nr_bytes = olpc_xo175_ec_is_valid_cmd(cmd);
+ if (nr_bytes < 0) {
+ dev_err_ratelimited(dev, "unknown command 0x%x\n", cmd);
+
+ /*
+ * Assume the best in our callers, and allow unknown commands
+ * through. I'm not the charitable type, but it was beaten
+ * into me. Just maintain a minimum standard of sanity.
+ */
+ if (resp_len > sizeof(priv->resp_data)) {
+ dev_err(dev, "response too big: %d!\n", resp_len);
+ return -EOVERFLOW;
+ }
+ nr_bytes = resp_len;
+ }
+ resp_len = min(resp_len, nr_bytes);
+
+ spin_lock_irqsave(&priv->cmd_state_lock, flags);
+
+ /* Initialize the state machine */
+ init_completion(&priv->cmd_done);
+ priv->cmd_running = true;
+ priv->cmd_state = CMD_STATE_WAITING_FOR_SWITCH;
+ memset(&priv->cmd, 0, sizeof(priv->cmd));
+ priv->cmd.command = cmd;
+ priv->cmd.nr_args = inlen;
+ priv->cmd.data_len = 0;
+ memcpy(priv->cmd.args, inbuf, inlen);
+ priv->expected_resp_len = nr_bytes;
+ priv->resp_len = 0;
+
+ /* Tickle the cmd gpio to get things started */
+ gpiod_set_value_cansleep(priv->gpio_cmd, 1);
+
+ spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
+
+ /* The irq handler should do the rest */
+ if (!wait_for_completion_timeout(&priv->cmd_done,
+ msecs_to_jiffies(4000))) {
+ dev_err(dev, "EC cmd error: timeout in STATE %d\n",
+ priv->cmd_state);
+ gpiod_set_value_cansleep(priv->gpio_cmd, 0);
+ spi_slave_abort(priv->spi);
+ olpc_xo175_ec_read_packet(priv);
+ return -ETIMEDOUT;
+ }
+
+ spin_lock_irqsave(&priv->cmd_state_lock, flags);
+
+ /* Deal with the results. */
+ if (priv->cmd_state == CMD_STATE_ERROR_RECEIVED) {
+ /* EC-provided error is in the single response byte */
+ dev_err(dev, "command 0x%x returned error 0x%x\n",
+ cmd, priv->resp_data[0]);
+ ret = -EREMOTEIO;
+ } else if (priv->resp_len != nr_bytes) {
+ dev_err(dev, "command 0x%x returned %d bytes, expected %d bytes\n",
+ cmd, priv->resp_len, nr_bytes);
+ ret = -EREMOTEIO;
+ } else {
+ /*
+ * We may have 8 bytes in priv->resp, but we only care about
+ * what we've been asked for. If the caller asked for only 2
+ * bytes, give them that. We've guaranteed that
+ * resp_len <= priv->resp_len and priv->resp_len == nr_bytes.
+ */
+ memcpy(resp, priv->resp_data, resp_len);
+ }
+
+ /* This should already be low, but just in case. */
+ gpiod_set_value_cansleep(priv->gpio_cmd, 0);
+ priv->cmd_running = false;
+
+ spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
+
+ return ret;
+}
+
+static int olpc_xo175_ec_set_event_mask(unsigned int mask)
+{
+ unsigned char args[2];
+
+ args[0] = (mask >> 0) & 0xff;
+ args[1] = (mask >> 8) & 0xff;
+ return olpc_ec_cmd(CMD_WRITE_EXT_SCI_MASK, args, 2, NULL, 0);
+}
+
+static void olpc_xo175_ec_restart(enum reboot_mode mode, const char *cmd)
+{
+ while (1) {
+ olpc_ec_cmd(CMD_POWER_CYCLE, NULL, 0, NULL, 0);
+ mdelay(1000);
+ }
+}
+
+static void olpc_xo175_ec_power_off(void)
+{
+ while (1) {
+ olpc_ec_cmd(CMD_POWER_OFF, NULL, 0, NULL, 0);
+ mdelay(1000);
+ }
+}
+
+static int __maybe_unused olpc_xo175_ec_suspend(struct device *dev)
+{
+ struct olpc_xo175_ec *priv = dev_get_drvdata(dev);
+ static struct {
+ u8 suspend;
+ u32 suspend_count;
+ } __packed hintargs;
+ static unsigned int suspend_count;
+
+ /*
+ * SOC_SLEEP is not wired to the EC on B3 and earlier boards.
+ * This command lets the EC know instead. The suspend count doesn't seem
+ * to be used anywhere but in the EC debug output.
+ */
+ hintargs.suspend = 1;
+ hintargs.suspend_count = suspend_count++;
+ olpc_ec_cmd(CMD_SUSPEND_HINT, (void *)&hintargs, sizeof(hintargs),
+ NULL, 0);
+
+ /*
+ * After we've sent the suspend hint, don't allow further EC commands
+ * to be run until we've resumed. Userspace tasks should be frozen,
+ * but kernel threads and interrupts could still schedule EC commands.
+ */
+ priv->suspended = true;
+
+ return 0;
+}
+
+static int __maybe_unused olpc_xo175_ec_resume_noirq(struct device *dev)
+{
+ struct olpc_xo175_ec *priv = dev_get_drvdata(dev);
+
+ priv->suspended = false;
+
+ return 0;
+}
+
+static int __maybe_unused olpc_xo175_ec_resume(struct device *dev)
+{
+ u8 x = 0;
+
+ /*
+ * The resume hint is only needed if no other commands are
+ * being sent during resume. all it does is tell the EC
+ * the SoC is definitely awake.
+ */
+ olpc_ec_cmd(CMD_SUSPEND_HINT, &x, 1, NULL, 0);
+
+ /* Enable all EC events while we're awake */
+ olpc_xo175_ec_set_event_mask(EC_ALL_EVENTS);
+
+ return 0;
+}
+
+static struct olpc_ec_driver olpc_xo175_ec_driver = {
+ .ec_cmd = olpc_xo175_ec_cmd,
+};
+
+static int olpc_xo175_ec_remove(struct spi_device *spi)
+{
+ if (pm_power_off == olpc_xo175_ec_power_off)
+ pm_power_off = NULL;
+ if (arm_pm_restart == olpc_xo175_ec_restart)
+ arm_pm_restart = NULL;
+
+ spi_slave_abort(spi);
+
+ platform_device_unregister(olpc_ec);
+ olpc_ec = NULL;
+
+ return 0;
+}
+
+static int olpc_xo175_ec_probe(struct spi_device *spi)
+{
+ struct olpc_xo175_ec *priv;
+ int ret;
+
+ if (olpc_ec) {
+ dev_err(&spi->dev, "OLPC EC already registered.\n");
+ return -EBUSY;
+ }
+
+ priv = devm_kzalloc(&spi->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->gpio_cmd = devm_gpiod_get(&spi->dev, "cmd", GPIOD_OUT_LOW);
+ if (IS_ERR(priv->gpio_cmd)) {
+ dev_err(&spi->dev, "failed to get cmd gpio: %ld\n",
+ PTR_ERR(priv->gpio_cmd));
+ return PTR_ERR(priv->gpio_cmd);
+ }
+
+ priv->spi = spi;
+
+ spin_lock_init(&priv->cmd_state_lock);
+ priv->cmd_state = CMD_STATE_IDLE;
+ init_completion(&priv->cmd_done);
+
+ priv->logbuf_len = 0;
+
+ /* Set up power button input device */
+ priv->pwrbtn = devm_input_allocate_device(&spi->dev);
+ if (!priv->pwrbtn)
+ return -ENOMEM;
+ priv->pwrbtn->name = "Power Button";
+ priv->pwrbtn->dev.parent = &spi->dev;
+ input_set_capability(priv->pwrbtn, EV_KEY, KEY_POWER);
+ ret = input_register_device(priv->pwrbtn);
+ if (ret) {
+ dev_err(&spi->dev, "error registering input device: %d\n", ret);
+ return ret;
+ }
+
+ spi_set_drvdata(spi, priv);
+
+ priv->xfer.rx_buf = &priv->rx_buf;
+ priv->xfer.tx_buf = &priv->tx_buf;
+
+ olpc_xo175_ec_read_packet(priv);
+
+ olpc_ec_driver_register(&olpc_xo175_ec_driver, priv);
+ olpc_ec = platform_device_register_resndata(&spi->dev, "olpc-ec", -1,
+ NULL, 0, NULL, 0);
+
+ /* Enable all EC events while we're awake */
+ olpc_xo175_ec_set_event_mask(EC_ALL_EVENTS);
+
+ if (pm_power_off == NULL)
+ pm_power_off = olpc_xo175_ec_power_off;
+ if (arm_pm_restart == NULL)
+ arm_pm_restart = olpc_xo175_ec_restart;
+
+ dev_info(&spi->dev, "OLPC XO-1.75 Embedded Controller driver\n");
+
+ return 0;
+}
+
+static const struct dev_pm_ops olpc_xo175_ec_pm_ops = {
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(NULL, olpc_xo175_ec_resume_noirq)
+ SET_RUNTIME_PM_OPS(olpc_xo175_ec_suspend, olpc_xo175_ec_resume, NULL)
+};
+
+static const struct of_device_id olpc_xo175_ec_of_match[] = {
+ { .compatible = "olpc,xo1.75-ec" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, olpc_xo175_ec_of_match);
+
+static struct spi_driver olpc_xo175_ec_spi_driver = {
+ .driver = {
+ .name = "olpc-xo175-ec",
+ .of_match_table = olpc_xo175_ec_of_match,
+ .pm = &olpc_xo175_ec_pm_ops,
+ },
+ .probe = olpc_xo175_ec_probe,
+ .remove = olpc_xo175_ec_remove,
+};
+module_spi_driver(olpc_xo175_ec_spi_driver);
+
+MODULE_DESCRIPTION("OLPC XO-1.75 Embedded Controller driver");
+MODULE_AUTHOR("Lennert Buytenhek <buytenh@...tstofly.org>"); /* Functionality */
+MODULE_AUTHOR("Lubomir Rintel <lkundrak@...sk>"); /* Bugs */
+MODULE_LICENSE("GPL");
diff --git a/include/linux/olpc-ec.h b/include/linux/olpc-ec.h
index 79bdc6328c52..cafd152b3b1b 100644
--- a/include/linux/olpc-ec.h
+++ b/include/linux/olpc-ec.h
@@ -26,7 +26,7 @@ struct olpc_ec_driver {
int (*ec_cmd)(u8, u8 *, size_t, u8 *, size_t, void *);
};
-#ifdef CONFIG_OLPC
+#ifdef CONFIG_OLPC_EC
extern void olpc_ec_driver_register(struct olpc_ec_driver *drv, void *arg);
@@ -38,6 +38,6 @@ extern int olpc_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen, u8 *outbuf,
static inline int olpc_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen, u8 *outbuf,
size_t outlen) { return -ENODEV; }
-#endif /* CONFIG_OLPC */
+#endif /* CONFIG_OLPC_EC */
#endif /* _LINUX_OLPC_EC_H */
--
2.20.1
Powered by blists - more mailing lists