| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <2766fbf2b6f7d28f566e85448a7c7f24dbe907cb.1547062835.git.tom.zanussi@linux.intel.com>
Date: Wed, 9 Jan 2019 13:49:16 -0600
From: Tom Zanussi <zanussi@...nel.org>
To: rostedt@...dmis.org
Cc: tglx@...utronix.de, mhiramat@...nel.org, namhyung@...nel.org,
vedang.patel@...el.com, bigeasy@...utronix.de,
joel@...lfernandes.org, mathieu.desnoyers@...icios.com,
julia@...com, linux-kernel@...r.kernel.org,
linux-rt-users@...r.kernel.org
Subject: [PATCH v11 09/15] tracing: Add hist trigger onchange() handler Documentation
From: Tom Zanussi <tom.zanussi@...ux.intel.com>
Add Documentation for the hist:onchange($var) handler.
Signed-off-by: Tom Zanussi <tom.zanussi@...ux.intel.com>
---
Documentation/trace/histogram.rst | 98 +++++++++++++++++++++++++++++++++++++++
1 file changed, 98 insertions(+)
diff --git a/Documentation/trace/histogram.rst b/Documentation/trace/histogram.rst
index 353317bc3825..79476c906b1a 100644
--- a/Documentation/trace/histogram.rst
+++ b/Documentation/trace/histogram.rst
@@ -1869,6 +1869,7 @@ The available handlers are:
- onmatch(matching.event) - invoke action on any addition or update
- onmax(var) - invoke action if var exceeds current max
+ - onchange(var) - invoke action if var changes
The available actions are:
@@ -2140,6 +2141,103 @@ The following commonly-used handler.action pairs are available:
<...>-2102 [005] d..4 309.875185: sched_wake_idle_without_ipi: cpu=1
<idle>-0 [001] d..3 309.875200: sched_switch: prev_comm=swapper/1 prev_pid=0 prev_prio=120 prev_state=S ==> next_comm=cyclictest next_pid=2103 next_prio=19
+ - onchange(var).save(field,.. .)
+
+ The 'onchange(var).save(field,...)' hist trigger action is invoked
+ whenever the value of 'var' associated with a histogram entry
+ changes.
+
+ The end result is that the trace event fields specified as the
+ onchange.save() params will be saved if 'var' changes for that
+ hist trigger entry. This allows context from the event that
+ changed the value to be saved for later reference. When the
+ histogram is displayed, additional fields displaying the saved
+ values will be printed.
+
+ - onchange(var).snapshot()
+
+ The 'onchange(var).snapshot()' hist trigger action is invoked
+ whenever the value of 'var' associated with a histogram entry
+ changes.
+
+ The end result is that a global snapshot of the trace buffer will
+ be saved in the tracing/snapshot file if 'var' changes for any
+ hist trigger entry.
+
+ Note that in this case the changed value is a global variable
+ associated withe current trace instance. The key of the specific
+ trace event that caused the value to change and the global value
+ itself are displayed, along with a message stating that a snapshot
+ has been taken and where to find it. The user can use the key
+ information displayed to locate the corresponding bucket in the
+ histogram for even more detail.
+
+ As an example the below defines a hist trigger on the tcp_probe
+ event, keyed on dport. Whenever a tcp_probe event occurs, the
+ cwnd field is checked against the current value stored in the
+ $cwnd variable. If the value has changed, a snapshot is taken.
+ As part of the setup, all the scheduler and tcp events are also
+ enabled, which are the events that will show up in the snapshot
+ when it is taken at some point:
+
+ # echo 1 > /sys/kernel/debug/tracing/events/sched/enable
+ # echo 1 > /sys/kernel/debug/tracing/events/tcp/enable
+
+ # echo 'hist:keys=dport:cwnd=snd_cwnd: \
+ onchange($cwnd).save(snd_wnd,srtt,rcv_wnd): \
+ onchange($cwnd).snapshot()' >> \
+ /sys/kernel/debug/tracing/events/tcp/tcp_probe/trigger
+
+ When the histogram is displayed, for each bucket the tracked value
+ and the saved values corresponding to that value are displayed
+ following the rest of the fields.
+
+ If a snaphot was taken, there is also a message indicating that,
+ along with the value and event that triggered the snapshot:
+
+ # cat /sys/kernel/debug/tracing/events/tcp/tcp_probe/hist
+ { dport: 1521 } hitcount: 8
+ changed: 10 snd_wnd: 35456 srtt: 154262 rcv_wnd: 42112
+
+ { dport: 80 } hitcount: 23
+ changed: 10 snd_wnd: 28960 srtt: 19604 rcv_wnd: 29312
+
+ { dport: 9001 } hitcount: 172
+ changed: 10 snd_wnd: 48384 srtt: 260444 rcv_wnd: 55168
+
+ { dport: 443 } hitcount: 211
+ changed: 10 snd_wnd: 26960 srtt: 17379 rcv_wnd: 28800
+
+ Snapshot taken (see tracing/snapshot). Details:
+ triggering value { onchange($cwnd) }: 10
+ triggered by event with key: { dport: 80 }
+
+ Totals:
+ Hits: 414
+ Entries: 4
+ Dropped: 0
+
+ In the above case, the event that triggered the snapshot has the
+ key with dport == 80. If you look at the bucket that has 80 as
+ the key, you'll find the additional values save()'d along with the
+ changed value for that bucket, which should be the same as the
+ global changed value (since that was the same value that triggered
+ the global snapshot).
+
+ And finally, looking at the snapshot data should show at or near
+ the end the event that triggered the snapshot:
+
+ # cat /sys/kernel/debug/tracing/snapshot
+
+ gnome-shell-1261 [006] dN.3 49.823113: sched_stat_runtime: comm=gnome-shell pid=1261 runtime=49347 [ns] vruntime=1835730389 [ns]
+ kworker/u16:4-773 [003] d..3 49.823114: sched_switch: prev_comm=kworker/u16:4 prev_pid=773 prev_prio=120 prev_state=R+ ==> next_comm=kworker/3:2 next_pid=135 next_prio=120
+ gnome-shell-1261 [006] d..3 49.823114: sched_switch: prev_comm=gnome-shell prev_pid=1261 prev_prio=120 prev_state=R+ ==> next_comm=kworker/6:2 next_pid=387 next_prio=120
+ kworker/3:2-135 [003] d..3 49.823118: sched_stat_runtime: comm=kworker/3:2 pid=135 runtime=5339 [ns] vruntime=17815800388 [ns]
+ kworker/6:2-387 [006] d..3 49.823120: sched_stat_runtime: comm=kworker/6:2 pid=387 runtime=9594 [ns] vruntime=14589605367 [ns]
+ kworker/6:2-387 [006] d..3 49.823122: sched_switch: prev_comm=kworker/6:2 prev_pid=387 prev_prio=120 prev_state=R+ ==> next_comm=gnome-shell next_pid=1261 next_prio=120
+ kworker/3:2-135 [003] d..3 49.823123: sched_switch: prev_comm=kworker/3:2 prev_pid=135 prev_prio=120 prev_state=T ==> next_comm=swapper/3 next_pid=0 next_prio=120
+ <idle>-0 [004] ..s7 49.823798: tcp_probe: src=10.0.0.10:54326 dest=23.215.104.193:80 mark=0x0 length=32 snd_nxt=0xe3ae2ff5 snd_una=0xe3ae2ecd snd_cwnd=10 ssthresh=2147483647 snd_wnd=28960 srtt=19604 rcv_wnd=29312
+
3. User space creating a trigger
--------------------------------
--
2.14.1
Powered by blists - more mailing lists