| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190109071009.27625-1-paul.elder@ideasonboard.com>
Date: Wed, 9 Jan 2019 02:10:09 -0500
From: Paul Elder <paul.elder@...asonboard.com>
To: laurent.pinchart@...asonboard.com, kieran.bingham@...asonboard.com
Cc: Paul Elder <paul.elder@...asonboard.com>, drinkcat@...omium.org,
b-liu@...com, balbi@...nel.org, gregkh@...uxfoundation.org,
linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2] usb: gadget: musb: fix short isoc packets with inventra dma
Handling short packets (length < max packet size) in the Inventra DMA
engine in the MUSB driver causes the MUSB DMA controller to hang. An
example of a problem that is caused by this problem is when streaming
video out of a UVC gadget, only the first video frame is transferred.
For short packets (mode-0 or mode-1 DMA), MUSB_TXCSR_TXPKTRDY must be
set manually by the driver. This was previously done in musb_g_tx
(musb_gadget.c), but incorrectly (all csr flags were cleared, and only
MUSB_TXCSR_MODE and MUSB_TXCSR_TXPKTRDY were set). Fixing that problem
allows some requests to be transferred correctly, but multiple requests
were often put together in one USB packet, and caused problems if the
packet size was not a multiple of 4. Instead, set MUSB_TXCSR_TXPKTRDY
in dma_controller_irq (musbhsdma.c), just like host mode transfers.
This topic was originally tackled by Nicolas Boichat [0] [1] and is
discussed further at [2] as part of his GSoC project [3].
[0] https://groups.google.com/forum/?hl=en#!topic/beagleboard-gsoc/k8Azwfp75CU
[1] https://gitorious.org/beagleboard-usbsniffer/beagleboard-usbsniffer-kernel/commit/b0be3b6cc195ba732189b04f1d43ec843c3e54c9?p=beagleboard-usbsniffer:beagleboard-usbsniffer-kernel.git;a=patch;h=b0be3b6cc195ba732189b04f1d43ec843c3e54c9
[2] http://beagleboard-usbsniffer.blogspot.com/2010/07/musb-isochronous-transfers-fixed.html
[3] http://elinux.org/BeagleBoard/GSoC/USBSniffer
Signed-off-by: Paul Elder <paul.elder@...asonboard.com>
---
Changes in v2:
- no more flushing FIFO
- greatly simplified short packet if guard in musb_g_tx, and removed
unnecessary variables
- minor indentation and wording changes
drivers/usb/musb/musb_gadget.c | 19 +++++--------------
drivers/usb/musb/musbhsdma.c | 21 +++++++++++----------
2 files changed, 16 insertions(+), 24 deletions(-)
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index eae8b1b1b45b..496643f54faa 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -452,13 +452,10 @@ void musb_g_tx(struct musb *musb, u8 epnum)
}
if (request) {
- u8 is_dma = 0;
- bool short_packet = false;
trace_musb_req_tx(req);
if (dma && (csr & MUSB_TXCSR_DMAENAB)) {
- is_dma = 1;
csr |= MUSB_TXCSR_P_WZC_BITS;
csr &= ~(MUSB_TXCSR_DMAENAB | MUSB_TXCSR_P_UNDERRUN |
MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_AUTOSET);
@@ -476,16 +473,8 @@ void musb_g_tx(struct musb *musb, u8 epnum)
*/
if ((request->zero && request->length)
&& (request->length % musb_ep->packet_sz == 0)
- && (request->actual == request->length))
- short_packet = true;
+ && (request->actual == request->length)) {
- if ((musb_dma_inventra(musb) || musb_dma_ux500(musb)) &&
- (is_dma && (!dma->desired_mode ||
- (request->actual &
- (musb_ep->packet_sz - 1)))))
- short_packet = true;
-
- if (short_packet) {
/*
* On DMA completion, FIFO may not be
* available yet...
@@ -493,8 +482,10 @@ void musb_g_tx(struct musb *musb, u8 epnum)
if (csr & MUSB_TXCSR_TXPKTRDY)
return;
- musb_writew(epio, MUSB_TXCSR, MUSB_TXCSR_MODE
- | MUSB_TXCSR_TXPKTRDY);
+ musb_dbg(musb, "sending short pkt (zero=%d, length=%d, actual=%d, dma->desired_mode=%d)\n",
+ request->zero, request->length, request->actual,
+ dma->desired_mode);
+ musb_writew(epio, MUSB_TXCSR, csr | MUSB_TXCSR_TXPKTRDY);
request->zero = 0;
}
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index a688f7f87829..5fc6825745f2 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -346,12 +346,10 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
channel->status = MUSB_DMA_STATUS_FREE;
/* completed */
- if ((devctl & MUSB_DEVCTL_HM)
- && (musb_channel->transmit)
- && ((channel->desired_mode == 0)
- || (channel->actual_len &
- (musb_channel->max_packet_sz - 1)))
- ) {
+ if (musb_channel->transmit &&
+ (!channel->desired_mode ||
+ (channel->actual_len %
+ musb_channel->max_packet_sz))) {
u8 epnum = musb_channel->epnum;
int offset = musb->io.ep_offset(epnum,
MUSB_TXCSR);
@@ -363,11 +361,14 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
*/
musb_ep_select(mbase, epnum);
txcsr = musb_readw(mbase, offset);
- txcsr &= ~(MUSB_TXCSR_DMAENAB
+ if (channel->desired_mode == 1) {
+ txcsr &= ~(MUSB_TXCSR_DMAENAB
| MUSB_TXCSR_AUTOSET);
- musb_writew(mbase, offset, txcsr);
- /* Send out the packet */
- txcsr &= ~MUSB_TXCSR_DMAMODE;
+ musb_writew(mbase, offset, txcsr);
+ /* Send out the packet */
+ txcsr &= ~MUSB_TXCSR_DMAMODE;
+ txcsr |= MUSB_TXCSR_DMAENAB;
+ }
txcsr |= MUSB_TXCSR_TXPKTRDY;
musb_writew(mbase, offset, txcsr);
}
--
2.20.1
Powered by blists - more mailing lists