linux-kernel - Re: [PATCH v6 02/12] gpu: ipu-csi: Swap fields according to input/output field types

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <1547032306.4160.0.camel@pengutronix.de>
Date:   Wed, 09 Jan 2019 12:11:46 +0100
From:   Philipp Zabel <p.zabel@...gutronix.de>
To:     Steve Longerbeam <slongerbeam@...il.com>,
        linux-media@...r.kernel.org
Cc:     Mauro Carvalho Chehab <mchehab@...nel.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
        "open list:DRM DRIVERS FOR FREESCALE IMX" 
        <dri-devel@...ts.freedesktop.org>,
        open list <linux-kernel@...r.kernel.org>,
        "open list:STAGING SUBSYSTEM" <devel@...verdev.osuosl.org>,
        "open list:FRAMEBUFFER LAYER" <linux-fbdev@...r.kernel.org>
Subject: Re: [PATCH v6 02/12] gpu: ipu-csi: Swap fields according to
 input/output field types

On Tue, 2019-01-08 at 16:15 -0800, Steve Longerbeam wrote:
> The function ipu_csi_init_interface() was inverting the F-bit for
> NTSC case, in the CCIR_CODE_1/2 registers. The result being that
> for NTSC bottom-top field order, the CSI would swap fields and
> capture in top-bottom order.
> 
> Instead, base field swap on the field order of the input to the CSI,
> and the field order of the requested output. If the input/output
> fields are sequential but different, swap fields, otherwise do
> not swap. This requires passing both the input and output mbus
> frame formats to ipu_csi_init_interface().
> 
> Move this code to a new private function ipu_csi_set_bt_interlaced_codes()
> that programs the CCIR_CODE_1/2 registers for interlaced BT.656 (and
> possibly interlaced BT.1120 in the future).
> 
> When detecting input video standard from the input frame width/height,
> make sure to double height if input field type is alternate, since
> in that case input height only includes lines for one field.
> 
> Signed-off-by: Steve Longerbeam <slongerbeam@...il.com>
> Reviewed-by: Philipp Zabel <p.zabel@...gutronix.de>

Also
Acked-by: Philipp Zabel <p.zabel@...gutronix.de>
to be merged via the media tree

regards
Philipp