[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190110151020.30468-5-peda@axentia.se>
Date: Thu, 10 Jan 2019 15:10:48 +0000
From: Peter Rosin <peda@...ntia.se>
To: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC: Peter Rosin <peda@...ntia.se>,
Boris Brezillon <boris.brezillon@...tlin.com>,
David Airlie <airlied@...ux.ie>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
"dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH 4/4] drm/atmel-hlcdc: do not immediately disable planes, wait
for next frame
The A2Q and UPDATE bits have no effect in the channel disable registers.
However, since they are present, assume that the intention is to disable
planes, not immediately as indicated by the RST bit, but on the next
frame shift since that is what A2Q and UPDATE means in the channel enable
registers.
Disabling the plane on the next frame shift is done with the EN bit,
so use that.
Signed-off-by: Peter Rosin <peda@...ntia.se>
---
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
index 05519e8c6586..f2f570642f84 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
@@ -728,9 +728,7 @@ static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p,
/* Disable the layer */
atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHDR,
- ATMEL_HLCDC_LAYER_RST |
- ATMEL_HLCDC_LAYER_A2Q |
- ATMEL_HLCDC_LAYER_UPDATE);
+ ATMEL_HLCDC_LAYER_EN);
/* Clear all pending interrupts */
atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
--
2.11.0
Powered by blists - more mailing lists