lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Thu, 10 Jan 2019 10:49:01 -0600
From:   Rob Herring <robh+dt@...nel.org>
To:     Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Cc:     Shawn Guo <shawnguo@...nel.org>, Yang-Leo Li <leoyang.li@....com>,
        "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" 
        <linux-arm-kernel@...ts.infradead.org>, devicetree@...r.kernel.org,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        a.tropschug@...-systart.com, m.bittner@...-systart.com,
        Amit Kucheria <amit.kucheria@...aro.org>
Subject: Re: [PATCH 0/3] Add Oxalis board support

On Thu, Jan 10, 2019 at 2:08 AM Manivannan Sadhasivam
<manivannan.sadhasivam@...aro.org> wrote:
>
> Hello,
>
> This patchset adds Oxalis board support. This board is one of the
> 96Boards Enterprise Edition platform from EBS-SYSTART GmbH. Below are some
> of the key features of this board:
>
> * SoC: NXP Layerscape LS1012A
> * RAM: 1GB DDR3L
> * PMU: NXP VR5100
> * Storage: 64MByte SPI Flash for bootloader and RCW, MicroSD Card, SATA
> * Connectivity: 2x Ethernet
> * USB: 2x USB3.0
>
> More information about this board can be found in 96Boards product
> page: https://www.96boards.org/product/oxalis/
>
> Ethernet and SPI flash are not supported yet!
>
> Thanks,
> Mani
>
> Manivannan Sadhasivam (3):
>   dt-bindings: vendor-prefixes: Add EBS-SYSTART GmbH Vendor Prefix
>   dt-bindings: arm: fsl: Add devicetree binding for Oxalis
>   arm64: dts: freescale: Add devicetree for Oxalis
>
>  Documentation/devicetree/bindings/arm/fsl.txt |  4 +

This is converted to json-schema now (in Shawn's tree), so you'll need
to update to that.

Rob

>  .../devicetree/bindings/vendor-prefixes.txt   |  1 +
>  arch/arm64/boot/dts/freescale/Makefile        |  1 +
>  .../boot/dts/freescale/fsl-ls1012a-oxalis.dts | 96 +++++++++++++++++++
>  4 files changed, 102 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts
>
> --
> 2.17.1
>

Powered by blists - more mailing lists