lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190111131116.627394872@linuxfoundation.org>
Date:   Fri, 11 Jan 2019 15:13:57 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Anssi Hannula <anssi.hannula@...wise.fi>,
        Harini Katakam <harini.katakam@...inx.com>,
        Claudiu Beznea <claudiu.beznea@...rochip.com>,
        Nicolas Ferre <nicolas.ferre@...rochip.com>,
        Michal Simek <michal.simek@...inx.com>,
        "David S. Miller" <davem@...emloft.net>,
        Sasha Levin <sashal@...nel.org>
Subject: [PATCH 4.19 059/148] net: macb: fix random memory corruption on RX with 64-bit DMA

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit e100a897bf9b19089e57f236f2398c9e0538900e ]

64-bit DMA addresses are split in upper and lower halves that are
written in separate fields on GEM. For RX, bit 0 of the address is used
as the ownership bit (RX_USED). When the RX_USED bit is unset the
controller is allowed to write data to the buffer.

The driver does not guarantee that the controller already sees the upper
half when the RX_USED bit is cleared, possibly resulting in the
controller writing an incoming frame to an address with an incorrect
upper half and therefore possibly corrupting unrelated system memory.

Fix that by adding the necessary DMA memory barrier between the writes.

This corruption was observed on a ZynqMP based system.

Fixes: fff8019a08b6 ("net: macb: Add 64 bit addressing support for GEM")
Signed-off-by: Anssi Hannula <anssi.hannula@...wise.fi>
Acked-by: Harini Katakam <harini.katakam@...inx.com>
Tested-by: Claudiu Beznea <claudiu.beznea@...rochip.com>
Cc: Nicolas Ferre <nicolas.ferre@...rochip.com>
Cc: Michal Simek <michal.simek@...inx.com>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/net/ethernet/cadence/macb_main.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 240fd36b5074..2de9197df074 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -682,6 +682,11 @@ static void macb_set_addr(struct macb *bp, struct macb_dma_desc *desc, dma_addr_
 	if (bp->hw_dma_cap & HW_DMA_CAP_64B) {
 		desc_64 = macb_64b_desc(bp, desc);
 		desc_64->addrh = upper_32_bits(addr);
+		/* The low bits of RX address contain the RX_USED bit, clearing
+		 * of which allows packet RX. Make sure the high bits are also
+		 * visible to HW at that point.
+		 */
+		dma_wmb();
 	}
 #endif
 	desc->addr = lower_32_bits(addr);
-- 
2.19.1



Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ