linux-kernel - Re: [PATCH v3] arm64: dts: meson: Fix mmc cd-gpios polarity

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <7hy37rm0j6.fsf@baylibre.com>
Date:   Fri, 11 Jan 2019 11:55:57 -0800
From:   Kevin Hilman <khilman@...libre.com>
To:     Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
        Loys Ollivier <lollivier@...libre.com>
Cc:     devicetree@...r.kernel.org, linux-amlogic@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-mmc@...r.kernel.org,
        Linus Walleij <linus.walleij@...aro.org>,
        Jerome Brunet <jbrunet@...libre.com>
Subject: Re: [PATCH v3] arm64: dts: meson: Fix mmc cd-gpios polarity

Martin Blumenstingl <martin.blumenstingl@...glemail.com> writes:

> Hi,
>
> some nit-picks as well as my Tested-by (in case it's not too late) below.
> thank you for taking care of this!
>
> On Thu, Jan 10, 2019 at 4:40 PM Loys Ollivier <lollivier@...libre.com> wrote:
>>
>> Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
>> changed the behavior of "cd-inverted" to follow the device tree bindings
>> specification.
>> Lines specifying "cd-inverted" are now "active high".
> this depends on the polarity from the cd-gpios property. above commit
> caused cd-inverted to be applied twice (effectively making it a
> no-op). thus "cd-inverted" only means "active high" if cd-gpios also
> sets GPIO_ACTIVE_HIGH. if the polarity in cd-gpios is GPIO_ACTIVE_LOW
> together with "cd-inverted" then the GPIO will be treated as active
> low.
>
>> Fix the SD card for meson by setting the cd-gpios as "active low" according
>> to the boards specifications.
> not only switching to GPIO_ACTIVE_LOW, also dropping "cd-inverted"
>
>> Fixes: 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
> in my patches for the 32-bit boards I used the commit which added SD
> card support to the board for the Fixes tag. however, I'm fine with
> this as well (I just wanted to point out that there's a small
> difference in our commits).
>
>> Signed-off-by: Loys Ollivier <lollivier@...libre.com>
> on my Khadas VIM(1), using Kevin's v5.0/fixes branch:
> Tested-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>

I can add this tested-by tag in my v5.0/fixes branch for now, and can
replace it with a follow up if Loys can update the changelog with your
suggestions/clarifications.

Thanks,

Kevin