| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CY4PR02MB27099712E6A7C0449D974175A7800@CY4PR02MB2709.namprd02.prod.outlook.com>
Date: Mon, 14 Jan 2019 09:47:46 +0000
From: Vishal Sagar <vsagar@...inx.com>
To: Sakari Ailus <sakari.ailus@....fi>,
Vishal Sagar <vishal.sagar@...inx.com>
CC: Hyun Kwon <hyunk@...inx.com>,
"laurent.pinchart@...asonboard.com"
<laurent.pinchart@...asonboard.com>,
Michal Simek <michals@...inx.com>,
"linux-media@...r.kernel.org" <linux-media@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"sakari.ailus@...ux.intel.com" <sakari.ailus@...ux.intel.com>,
"hans.verkuil@...co.com" <hans.verkuil@...co.com>,
"mchehab@...nel.org" <mchehab@...nel.org>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
Dinesh Kumar <dineshk@...inx.com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH 2/2] media: v4l: xilinx: Add Xilinx MIPI CSI-2 Rx
Subsystem driver
Hi Sakari,
Thanks for reviewing my patch.
> -----Original Message-----
> From: linux-media-owner@...r.kernel.org [mailto:linux-media-
> owner@...r.kernel.org] On Behalf Of Sakari Ailus
> Sent: Wednesday, January 09, 2019 5:22 PM
> To: Vishal Sagar <vishal.sagar@...inx.com>
> Cc: Hyun Kwon <hyunk@...inx.com>; laurent.pinchart@...asonboard.com;
> Michal Simek <michals@...inx.com>; linux-media@...r.kernel.org;
> devicetree@...r.kernel.org; sakari.ailus@...ux.intel.com;
> hans.verkuil@...co.com; mchehab@...nel.org; robh+dt@...nel.org;
> mark.rutland@....com; Dinesh Kumar <dineshk@...inx.com>; linux-arm-
> kernel@...ts.infradead.org; linux-kernel@...r.kernel.org
> Subject: Re: [PATCH 2/2] media: v4l: xilinx: Add Xilinx MIPI CSI-2 Rx Subsystem
> driver
>
> EXTERNAL EMAIL
>
> Hi Vishal,
>
> Please see my comments below.
>
> On Wed, May 30, 2018 at 12:24:44AM +0530, Vishal Sagar wrote:
> > The Xilinx MIPI CSI-2 Rx Subsystem soft IP is used to capture images
> > from MIPI CSI-2 camera sensors and output AXI4-Stream video data ready
> > for image processing.
> >
> > It supports upto 4 lanes, filtering based on Virtual Channel selected in
> > IP, an optional Xilinx IIC controller, optional register interface for
> > the DPHY, multiple color formats, short packet capture,
> >
> > This driver helps configure the number of active lanes to be set,
> > setting and handling interrupts and IP core enable.
> > It logs the count of events occurring according to their type between
> > streaming ON and OFF. The short packet reception is notified to
> > application via v4l2_event.
> >
> > Signed-off-by: Vishal Sagar <vishal.sagar@...inx.com>
> > ---
> > drivers/media/platform/xilinx/Kconfig | 12 +
> > drivers/media/platform/xilinx/Makefile | 1 +
> > drivers/media/platform/xilinx/xilinx-csi2rxss.c | 1751
> +++++++++++++++++++++++
> > include/uapi/linux/xilinx-csi2rxss.h | 25 +
> > include/uapi/linux/xilinx-v4l2-controls.h | 14 +
> > 5 files changed, 1803 insertions(+)
> > create mode 100644 drivers/media/platform/xilinx/xilinx-csi2rxss.c
> > create mode 100644 include/uapi/linux/xilinx-csi2rxss.h
> >
> > diff --git a/drivers/media/platform/xilinx/Kconfig
> b/drivers/media/platform/xilinx/Kconfig
> > index a5d21b7..06d5944 100644
> > --- a/drivers/media/platform/xilinx/Kconfig
> > +++ b/drivers/media/platform/xilinx/Kconfig
> > @@ -8,6 +8,18 @@ config VIDEO_XILINX
> >
> > if VIDEO_XILINX
> >
> > +config VIDEO_XILINX_CSI2RXSS
> > + tristate "Xilinx CSI2 Rx Subsystem"
> > + depends on VIDEO_XILINX
>
> I'm no Kconfig expert, but I'd think that you don't need to depend on
> things that the option already depends on if (above).
>
Ok. I will check and remove this if ok in next version.
> > + help
> > + Driver for Xilinx MIPI CSI2 Rx Subsystem. This is a V4L sub-device
> > + based driver that takes input from CSI2 Tx source and converts
> > + it into an AXI4-Stream. It has a DPHY (whose register interface
> > + can be enabled, an optional I2C controller and an optional Video
> > + Format Bridge which converts the AXI4-Stream data to Xilinx Video
> > + Bus formats based on UG934. The driver is used to set the number
> > + of active lanes and get short packet data.
> > +
> > config VIDEO_XILINX_TPG
> > tristate "Xilinx Video Test Pattern Generator"
> > depends on VIDEO_XILINX
> > diff --git a/drivers/media/platform/xilinx/Makefile
> b/drivers/media/platform/xilinx/Makefile
> > index e8a0f2a..768f079 100644
> > --- a/drivers/media/platform/xilinx/Makefile
> > +++ b/drivers/media/platform/xilinx/Makefile
> > @@ -1,5 +1,6 @@
> > xilinx-video-objs += xilinx-dma.o xilinx-vip.o xilinx-vipp.o
> >
> > obj-$(CONFIG_VIDEO_XILINX) += xilinx-video.o
> > +obj-$(CONFIG_VIDEO_XILINX_CSI2RXSS) += xilinx-csi2rxss.o
> > obj-$(CONFIG_VIDEO_XILINX_TPG) += xilinx-tpg.o
> > obj-$(CONFIG_VIDEO_XILINX_VTC) += xilinx-vtc.o
> > diff --git a/drivers/media/platform/xilinx/xilinx-csi2rxss.c
> b/drivers/media/platform/xilinx/xilinx-csi2rxss.c
> > new file mode 100644
> > index 0000000..03f387c
> > --- /dev/null
> > +++ b/drivers/media/platform/xilinx/xilinx-csi2rxss.c
> > @@ -0,0 +1,1751 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Driver for Xilinx MIPI CSI2 Rx Subsystem
> > + *
> > + * Copyright (C) 2016 - 2018 Xilinx, Inc.
> > + *
> > + * Contacts: Vishal Sagar <vishal.sagar@...inx.com>
> > + *
> > + */
> > +
> > +#include <dt-bindings/media/xilinx-vip.h>
> > +#include <linux/bitops.h>
> > +#include <linux/compiler.h>
> > +#include <linux/delay.h>
> > +#include <linux/device.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/io.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/mutex.h>
> > +#include <linux/of.h>
> > +#include <linux/of_irq.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm.h>
> > +#include <linux/slab.h>
> > +#include <linux/spinlock.h>
> > +#include <linux/spinlock_types.h>
> > +#include <linux/types.h>
> > +#include <linux/v4l2-subdev.h>
> > +#include <linux/xilinx-csi2rxss.h>
> > +#include <linux/xilinx-v4l2-controls.h>
> > +#include <media/media-entity.h>
> > +#include <media/v4l2-common.h>
> > +#include <media/v4l2-ctrls.h>
> > +#include <media/v4l2-event.h>
> > +#include <media/v4l2-fwnode.h>
> > +#include <media/v4l2-subdev.h>
> > +#include "xilinx-vip.h"
> > +
> > +/*
> > + * MIPI CSI2 Rx register map, bitmask and offsets
> > + */
> > +#define XCSI_CCR_OFFSET 0x00000000
> > +#define XCSI_CCR_SOFTRESET_SHIFT 1
> > +#define XCSI_CCR_COREENB_SHIFT 0
> > +#define XCSI_CCR_SOFTRESET_MASK
> BIT(XCSI_CCR_SOFTRESET_SHIFT)
> > +#define XCSI_CCR_COREENB_MASK BIT(XCSI_CCR_COREENB_SHIFT)
> > +
> > +#define XCSI_PCR_OFFSET 0x00000004
> > +#define XCSI_PCR_MAXLANES_MASK 0x00000018
> > +#define XCSI_PCR_ACTLANES_MASK 0x00000003
> > +#define XCSI_PCR_MAXLANES_SHIFT 3
> > +#define XCSI_PCR_ACTLANES_SHIFT 0
> > +
> > +#define XCSI_CSR_OFFSET 0x00000010
> > +#define XCSI_CSR_PKTCOUNT_SHIFT 16
> > +#define XCSI_CSR_SPFIFOFULL_SHIFT 3
> > +#define XCSI_CSR_SPFIFONE_SHIFT 2
> > +#define XCSI_CSR_SLBF_SHIFT 1
> > +#define XCSI_CSR_RIPCD_SHIFT 0
> > +#define XCSI_CSR_PKTCOUNT_MASK 0xFFFF0000
> > +#define XCSI_CSR_SPFIFOFULL_MASK BIT(XCSI_CSR_SPFIFOFULL_SHIFT)
> > +#define XCSI_CSR_SPFIFONE_MASK BIT(XCSI_CSR_SPFIFONE_SHIFT)
> > +#define XCSI_CSR_SLBF_MASK BIT(XCSI_CSR_SLBF_SHIFT)
> > +#define XCSI_CSR_RIPCD_MASK BIT(XCSI_CSR_RIPCD_SHIFT)
> > +
> > +#define XCSI_GIER_OFFSET 0x00000020
> > +#define XCSI_GIER_GIE_SHIFT 0
> > +#define XCSI_GIER_GIE_MASK BIT(XCSI_GIER_GIE_SHIFT)
> > +#define XCSI_GIER_SET 1
> > +#define XCSI_GIER_RESET 0
> > +
> > +#define XCSI_ISR_OFFSET 0x00000024
> > +#define XCSI_ISR_FR_SHIFT 31
> > +#define XCSI_ISR_ILC_SHIFT 21
> > +#define XCSI_ISR_SPFIFOF_SHIFT 20
> > +#define XCSI_ISR_SPFIFONE_SHIFT 19
> > +#define XCSI_ISR_SLBF_SHIFT 18
> > +#define XCSI_ISR_STOP_SHIFT 17
> > +#define XCSI_ISR_SOTERR_SHIFT 13
> > +#define XCSI_ISR_SOTSYNCERR_SHIFT 12
> > +#define XCSI_ISR_ECC2BERR_SHIFT 11
> > +#define XCSI_ISR_ECC1BERR_SHIFT 10
> > +#define XCSI_ISR_CRCERR_SHIFT 9
> > +#define XCSI_ISR_DATAIDERR_SHIFT 8
> > +#define XCSI_ISR_VC3FSYNCERR_SHIFT 7
> > +#define XCSI_ISR_VC3FLVLERR_SHIFT 6
> > +#define XCSI_ISR_VC2FSYNCERR_SHIFT 5
> > +#define XCSI_ISR_VC2FLVLERR_SHIFT 4
> > +#define XCSI_ISR_VC1FSYNCERR_SHIFT 3
> > +#define XCSI_ISR_VC1FLVLERR_SHIFT 2
> > +#define XCSI_ISR_VC0FSYNCERR_SHIFT 1
> > +#define XCSI_ISR_VC0FLVLERR_SHIFT 0
> > +#define XCSI_ISR_FR_MASK BIT(XCSI_ISR_FR_SHIFT)
> > +#define XCSI_ISR_ILC_MASK BIT(XCSI_ISR_ILC_SHIFT)
> > +#define XCSI_ISR_SPFIFOF_MASK BIT(XCSI_ISR_SPFIFOF_SHIFT)
> > +#define XCSI_ISR_SPFIFONE_MASK BIT(XCSI_ISR_SPFIFONE_SHIFT)
> > +#define XCSI_ISR_SLBF_MASK BIT(XCSI_ISR_SLBF_SHIFT)
> > +#define XCSI_ISR_STOP_MASK BIT(XCSI_ISR_STOP_SHIFT)
> > +#define XCSI_ISR_SOTERR_MASK BIT(XCSI_ISR_SOTERR_SHIFT)
> > +#define XCSI_ISR_SOTSYNCERR_MASK BIT(XCSI_ISR_SOTSYNCERR_SHIFT)
> > +#define XCSI_ISR_ECC2BERR_MASK BIT(XCSI_ISR_ECC2BERR_SHIFT)
> > +#define XCSI_ISR_ECC1BERR_MASK BIT(XCSI_ISR_ECC1BERR_SHIFT)
> > +#define XCSI_ISR_CRCERR_MASK BIT(XCSI_ISR_CRCERR_SHIFT)
> > +#define XCSI_ISR_DATAIDERR_MASK
> BIT(XCSI_ISR_DATAIDERR_SHIFT)
> > +#define XCSI_ISR_VC3FSYNCERR_MASK
> BIT(XCSI_ISR_VC3FSYNCERR_SHIFT)
> > +#define XCSI_ISR_VC3FLVLERR_MASK BIT(XCSI_ISR_VC3FLVLERR_SHIFT)
> > +#define XCSI_ISR_VC2FSYNCERR_MASK
> BIT(XCSI_ISR_VC2FSYNCERR_SHIFT)
> > +#define XCSI_ISR_VC2FLVLERR_MASK BIT(XCSI_ISR_VC2FLVLERR_SHIFT)
> > +#define XCSI_ISR_VC1FSYNCERR_MASK
> BIT(XCSI_ISR_VC1FSYNCERR_SHIFT)
> > +#define XCSI_ISR_VC1FLVLERR_MASK BIT(XCSI_ISR_VC1FLVLERR_SHIFT)
> > +#define XCSI_ISR_VC0FSYNCERR_MASK
> BIT(XCSI_ISR_VC0FSYNCERR_SHIFT)
> > +#define XCSI_ISR_VC0FLVLERR_MASK BIT(XCSI_ISR_VC0FLVLERR_SHIFT)
> > +#define XCSI_ISR_ALLINTR_MASK 0x803FFFFF
> > +
> > +#define XCSI_INTR_PROT_MASK (XCSI_ISR_VC3FSYNCERR_MASK | \
> > + XCSI_ISR_VC3FLVLERR_MASK | \
> > + XCSI_ISR_VC2FSYNCERR_MASK | \
> > + XCSI_ISR_VC2FLVLERR_MASK | \
> > + XCSI_ISR_VC1FSYNCERR_MASK | \
> > + XCSI_ISR_VC1FLVLERR_MASK | \
> > + XCSI_ISR_VC0FSYNCERR_MASK | \
> > + XCSI_ISR_VC0FLVLERR_MASK)
> > +
> > +#define XCSI_INTR_PKTLVL_MASK (XCSI_ISR_ECC2BERR_MASK | \
> > + XCSI_ISR_ECC1BERR_MASK | \
> > + XCSI_ISR_CRCERR_MASK | \
> > + XCSI_ISR_DATAIDERR_MASK)
> > +
> > +#define XCSI_INTR_DPHY_MASK (XCSI_ISR_SOTERR_MASK | \
> > + XCSI_ISR_SOTSYNCERR_MASK)
> > +
> > +#define XCSI_INTR_SPKT_MASK (XCSI_ISR_SPFIFOF_MASK | \
> > + XCSI_ISR_SPFIFONE_MASK)
> > +
> > +#define XCSI_INTR_FRAMERCVD_MASK (XCSI_ISR_FR_MASK)
> > +
> > +#define XCSI_INTR_ERR_MASK (XCSI_ISR_ILC_MASK | \
> > + XCSI_ISR_SLBF_MASK | \
> > + XCSI_ISR_STOP_MASK)
> > +
> > +#define XCSI_IER_OFFSET 0x00000028
> > +#define XCSI_IER_FR_SHIFT 31
> > +#define XCSI_IER_ILC_SHIFT 21
> > +#define XCSI_IER_SPFIFOF_SHIFT 20
> > +#define XCSI_IER_SPFIFONE_SHIFT 19
> > +#define XCSI_IER_SLBF_SHIFT 18
> > +#define XCSI_IER_STOP_SHIFT 17
> > +#define XCSI_IER_SOTERR_SHIFT 13
> > +#define XCSI_IER_SOTSYNCERR_SHIFT 12
> > +#define XCSI_IER_ECC2BERR_SHIFT 11
> > +#define XCSI_IER_ECC1BERR_SHIFT 10
> > +#define XCSI_IER_CRCERR_SHIFT 9
> > +#define XCSI_IER_DATAIDERR_SHIFT 8
> > +#define XCSI_IER_VC3FSYNCERR_SHIFT 7
> > +#define XCSI_IER_VC3FLVLERR_SHIFT 6
> > +#define XCSI_IER_VC2FSYNCERR_SHIFT 5
> > +#define XCSI_IER_VC2FLVLERR_SHIFT 4
> > +#define XCSI_IER_VC1FSYNCERR_SHIFT 3
> > +#define XCSI_IER_VC1FLVLERR_SHIFT 2
> > +#define XCSI_IER_VC0FSYNCERR_SHIFT 1
> > +#define XCSI_IER_VC0FLVLERR_SHIFT 0
> > +#define XCSI_IER_FR_MASK BIT(XCSI_IER_FR_SHIFT)
> > +#define XCSI_IER_ILC_MASK BIT(XCSI_IER_ILC_SHIFT)
> > +#define XCSI_IER_SPFIFOF_MASK BIT(XCSI_IER_SPFIFOF_SHIFT)
> > +#define XCSI_IER_SPFIFONE_MASK BIT(XCSI_IER_SPFIFONE_SHIFT)
> > +#define XCSI_IER_SLBF_MASK BIT(XCSI_IER_SLBF_SHIFT)
> > +#define XCSI_IER_STOP_MASK BIT(XCSI_IER_STOP_SHIFT)
> > +#define XCSI_IER_SOTERR_MASK BIT(XCSI_IER_SOTERR_SHIFT)
> > +#define XCSI_IER_SOTSYNCERR_MASK BIT(XCSI_IER_SOTSYNCERR_SHIFT)
> > +#define XCSI_IER_ECC2BERR_MASK BIT(XCSI_IER_ECC2BERR_SHIFT)
> > +#define XCSI_IER_ECC1BERR_MASK BIT(XCSI_IER_ECC1BERR_SHIFT)
> > +#define XCSI_IER_CRCERR_MASK BIT(XCSI_IER_CRCERR_SHIFT)
> > +#define XCSI_IER_DATAIDERR_MASK
> BIT(XCSI_IER_DATAIDERR_SHIFT)
> > +#define XCSI_IER_VC3FSYNCERR_MASK
> BIT(XCSI_IER_VC3FSYNCERR_SHIFT)
> > +#define XCSI_IER_VC3FLVLERR_MASK BIT(XCSI_IER_VC3FLVLERR_SHIFT)
> > +#define XCSI_IER_VC2FSYNCERR_MASK
> BIT(XCSI_IER_VC2FSYNCERR_SHIFT)
> > +#define XCSI_IER_VC2FLVLERR_MASK BIT(XCSI_IER_VC2FLVLERR_SHIFT)
> > +#define XCSI_IER_VC1FSYNCERR_MASK
> BIT(XCSI_IER_VC1FSYNCERR_SHIFT)
> > +#define XCSI_IER_VC1FLVLERR_MASK BIT(XCSI_IER_VC1FLVLERR_SHIFT)
> > +#define XCSI_IER_VC0FSYNCERR_MASK
> BIT(XCSI_IER_VC0FSYNCERR_SHIFT)
> > +#define XCSI_IER_VC0FLVLERR_MASK BIT(XCSI_IER_VC0FLVLERR_SHIFT)
> > +#define XCSI_IER_ALLINTR_MASK 0x803FFFFF
> > +
> > +#define XCSI_SPKTR_OFFSET 0x00000030
> > +#define XCSI_SPKTR_DATA_SHIFT 8
> > +#define XCSI_SPKTR_VC_SHIFT 6
> > +#define XCSI_SPKTR_DT_SHIFT 0
> > +#define XCSI_SPKTR_DATA_MASK 0x00FFFF00
> > +#define XCSI_SPKTR_VC_MASK 0x000000C0
> > +#define XCSI_SPKTR_DT_MASK 0x0000003F
> > +
> > +#define XCSI_CLKINFR_OFFSET 0x0000003C
> > +#define XCSI_CLKINFR_STOP_SHIFT 1
> > +#define XCSI_CLKINFR_STOP_MASK BIT(XCSI_CLKINFR_STOP_SHIFT)
> > +
> > +#define XCSI_L0INFR_OFFSET 0x00000040
> > +#define XCSI_L1INFR_OFFSET 0x00000044
> > +#define XCSI_L2INFR_OFFSET 0x00000048
> > +#define XCSI_L3INFR_OFFSET 0x0000004C
> > +#define XCSI_LXINFR_STOP_SHIFT 5
> > +#define XCSI_LXINFR_SOTERR_SHIFT 1
> > +#define XCSI_LXINFR_SOTSYNCERR_SHIFT 0
> > +#define XCSI_LXINFR_STOP_MASK BIT(XCSI_LXINFR_STOP_SHIFT)
> > +#define XCSI_LXINFR_SOTERR_MASK
> BIT(XCSI_LXINFR_SOTERR_SHIFT)
> > +#define XCSI_LXINFR_SOTSYNCERR_MASK
> BIT(XCSI_LXINFR_SOTSYNCERR_SHIFT)
> > +
> > +#define XCSI_VC0INF1R_OFFSET 0x00000060
> > +#define XCSI_VC1INF1R_OFFSET 0x00000068
> > +#define XCSI_VC2INF1R_OFFSET 0x00000070
> > +#define XCSI_VC3INF1R_OFFSET 0x00000078
> > +#define XCSI_VCXINF1R_LINECOUNT_SHIFT 16
> > +#define XCSI_VCXINF1R_BYTECOUNT_SHIFT 0
> > +#define XCSI_VCXINF1R_LINECOUNT_MASK 0xFFFF0000
> > +#define XCSI_VCXINF1R_BYTECOUNT_MASK 0x0000FFFF
> > +
> > +#define XCSI_VC0INF2R_OFFSET 0x00000064
> > +#define XCSI_VC1INF2R_OFFSET 0x0000006C
> > +#define XCSI_VC2INF2R_OFFSET 0x00000074
> > +#define XCSI_VC3INF2R_OFFSET 0x0000007C
> > +#define XCSI_VCXINF2R_DATATYPE_SHIFT 0
> > +#define XCSI_VCXINF2R_DATATYPE_MASK 0x0000003F
> > +
> > +#define XDPHY_CTRLREG_OFFSET 0x0
> > +#define XDPHY_CTRLREG_DPHYEN_SHIFT 1
> > +#define XDPHY_CTRLREG_DPHYEN_MASK
> BIT(XDPHY_CTRLREG_DPHYEN_SHIFT)
> > +
> > +#define XDPHY_CLKSTATREG_OFFSET 0x18
> > +#define XDPHY_CLKSTATREG_MODE_SHIFT 0
> > +#define XDPHY_CLKSTATREG_MODE_MASK 0x3
> > +#define XDPHY_LOW_POWER_MODE 0x0
> > +#define XDPHY_HI_SPEED_MODE 0x1
> > +#define XDPHY_ESC_MODE 0x2
> > +
> > +/*
> > + * Interrupt mask
> > + */
> > +#define XCSI_INTR_MASK (XCSI_ISR_ALLINTR_MASK &
> ~XCSI_ISR_STOP_MASK)
> > +/*
> > + * Timeout for reset
> > + */
> > +#define XCSI_TIMEOUT_VAL (1000) /* us */
>
> No need for parentheses here or below.
Ok. Will remove these in next version.
>
> > +
> > +/*
> > + * Max string length for CSI Data type string
> > + */
> > +#define MAX_XIL_CSIDT_STR_LENGTH 64
> > +
> > +/*
> > + * Maximum number of short packet events per file handle.
> > + */
> > +#define XCSI_MAX_SPKT (512)
> > +
> > +/* Number of media pads */
> > +#define XILINX_CSI_MEDIA_PADS (2)
> > +
> > +#define XCSI_DEFAULT_WIDTH (1920)
> > +#define XCSI_DEFAULT_HEIGHT (1080)
> > +
> > +/*
> > + * Macro to return "true" or "false" string if bit is set
> > + */
> > +#define XCSI_GET_BITSET_STR(val, mask) (val) & (mask) ? "true" : "false"
> > +
> > +enum csi_datatypes {
> > + MIPI_CSI_DT_FRAME_START_CODE = 0x00,
> > + MIPI_CSI_DT_FRAME_END_CODE,
> > + MIPI_CSI_DT_LINE_START_CODE,
> > + MIPI_CSI_DT_LINE_END_CODE,
> > + MIPI_CSI_DT_SYNC_RSVD_04,
> > + MIPI_CSI_DT_SYNC_RSVD_05,
> > + MIPI_CSI_DT_SYNC_RSVD_06,
> > + MIPI_CSI_DT_SYNC_RSVD_07,
> > + MIPI_CSI_DT_GSPKT_08,
> > + MIPI_CSI_DT_GSPKT_09,
> > + MIPI_CSI_DT_GSPKT_0A,
> > + MIPI_CSI_DT_GSPKT_0B,
> > + MIPI_CSI_DT_GSPKT_0C,
> > + MIPI_CSI_DT_GSPKT_0D,
> > + MIPI_CSI_DT_GSPKT_0E,
> > + MIPI_CSI_DT_GSPKT_0F,
> > + MIPI_CSI_DT_GLPKT_10,
> > + MIPI_CSI_DT_GLPKT_11,
> > + MIPI_CSI_DT_GLPKT_12,
> > + MIPI_CSI_DT_GLPKT_13,
> > + MIPI_CSI_DT_GLPKT_14,
> > + MIPI_CSI_DT_GLPKT_15,
> > + MIPI_CSI_DT_GLPKT_16,
> > + MIPI_CSI_DT_GLPKT_17,
> > + MIPI_CSI_DT_YUV_420_8B,
> > + MIPI_CSI_DT_YUV_420_10B,
> > + MIPI_CSI_DT_YUV_420_8B_LEGACY,
> > + MIPI_CSI_DT_YUV_RSVD,
> > + MIPI_CSI_DT_YUV_420_8B_CSPS,
> > + MIPI_CSI_DT_YUV_420_10B_CSPS,
> > + MIPI_CSI_DT_YUV_422_8B,
> > + MIPI_CSI_DT_YUV_422_10B,
> > + MIPI_CSI_DT_RGB_444,
> > + MIPI_CSI_DT_RGB_555,
> > + MIPI_CSI_DT_RGB_565,
> > + MIPI_CSI_DT_RGB_666,
> > + MIPI_CSI_DT_RGB_888,
> > + MIPI_CSI_DT_RGB_RSVD_25,
> > + MIPI_CSI_DT_RGB_RSVD_26,
> > + MIPI_CSI_DT_RGB_RSVD_27,
> > + MIPI_CSI_DT_RAW_6,
> > + MIPI_CSI_DT_RAW_7,
> > + MIPI_CSI_DT_RAW_8,
> > + MIPI_CSI_DT_RAW_10,
> > + MIPI_CSI_DT_RAW_12,
> > + MIPI_CSI_DT_RAW_14,
> > + MIPI_CSI_DT_RAW_RSVD_2E,
> > + MIPI_CSI_DT_RAW_RSVD_2F,
> > + MIPI_CSI_DT_USER_30,
> > + MIPI_CSI_DT_USER_31,
> > + MIPI_CSI_DT_USER_32,
> > + MIPI_CSI_DT_USER_33,
> > + MIPI_CSI_DT_USER_34,
> > + MIPI_CSI_DT_USER_35,
> > + MIPI_CSI_DT_USER_36,
> > + MIPI_CSI_DT_USER_37,
> > + MIPI_CSI_DT_RSVD_38,
> > + MIPI_CSI_DT_RSVD_39,
> > + MIPI_CSI_DT_RSVD_3A,
> > + MIPI_CSI_DT_RSVD_3B,
> > + MIPI_CSI_DT_RSVD_3C,
> > + MIPI_CSI_DT_RSVD_3D,
> > + MIPI_CSI_DT_RSVD_3E,
> > + MIPI_CSI_DT_RSVD_3F
> > +};
> > +
> > +/**
> > + * struct pixel_format - Data Type to string name structure
> > + * @pixelformat: MIPI CSI2 Data type
> > + * @pixelformatstr: String name of Data Type
> > + */
> > +struct pixel_format {
> > + enum csi_datatypes pixelformat;
> > + char pixelformatstr[MAX_XIL_CSIDT_STR_LENGTH];
> > +};
> > +
> > +/**
> > + * struct xcsi2rxss_event - Event log structure
> > + * @mask: Event mask
> > + * @name: Name of the event
> > + * @counter: Count number of events
> > + */
> > +struct xcsi2rxss_event {
> > + u32 mask;
> > + const char * const name;
> > + unsigned int counter;
> > +};
> > +
> > +/*
> > + * struct xcsi2rxss_core - Core configuration CSI2 Rx Subsystem device
> structure
> > + * @dev: Platform structure
> > + * @iomem: Base address of subsystem
> > + * @irq: requested irq number
> > + * @dphy_present: Flag for DPHY register interface presence
> > + * @dphy_offset: DPHY registers offset
>
> Is the D-PHY a part of the same device, or is it effectively a separate
> device? Maxime has posted a patchset for PHY control so this could be a
> candidate user for that:
>
> <URL:https://lkml.org/lkml/2019/1/9/224>
>
The DPHY is part of the same device. But to save resource count on FPGA, its values may be fixed and
Register interface disabled.
> > + * @enable_active_lanes: If number of active lanes can be modified
> > + * @max_num_lanes: Maximum number of lanes present
> > + * @vfb: Video Format Bridge enabled or not
> > + * @ppc: pixels per clock
> > + * @vc: Virtual Channel
> > + * @axis_tdata_width: AXI Stream data width
> > + * @datatype: Data type filter
> > + * @pxlformat: String with CSI pixel format from IP
> > + * @num_lanes: Number of lanes requested from application
> > + * @events: Structure to maintain event logs
> > + */
> > +struct xcsi2rxss_core {
> > + struct device *dev;
> > + void __iomem *iomem;
> > + int irq;
> > + u32 dphy_offset;
> > + bool dphy_present;
> > + bool enable_active_lanes;
> > + u32 max_num_lanes;
> > + bool vfb;
> > + u32 ppc;
> > + u32 vc;
> > + u32 axis_tdata_width;
> > + u32 datatype;
> > + const char *pxlformat;
> > + u32 num_lanes;
> > + struct xcsi2rxss_event *events;
> > +};
> > +
> > +/**
> > + * struct xcsi2rxss_state - CSI2 Rx Subsystem device structure
> > + * @core: Core structure for MIPI CSI2 Rx Subsystem
> > + * @subdev: The v4l2 subdev structure
> > + * @ctrl_handler: control handler
> > + * @formats: Active V4L2 formats on each pad
> > + * @default_format: default V4L2 media bus format
> > + * @vip_format: format information corresponding to the active format
> > + * @event: Holds the short packet event
> > + * @lock: mutex for serializing operations
> > + * @pads: media pads
> > + * @npads: number of pads
> > + * @streaming: Flag for storing streaming state
> > + * @suspended: Flag for storing suspended state
> > + *
> > + * This structure contains the device driver related parameters
> > + */
> > +struct xcsi2rxss_state {
> > + struct xcsi2rxss_core core;
> > + struct v4l2_subdev subdev;
> > + struct v4l2_ctrl_handler ctrl_handler;
> > + struct v4l2_mbus_framefmt formats[2];
> > + struct v4l2_mbus_framefmt default_format;
> > + const struct xvip_video_format *vip_format;
> > + struct v4l2_event event;
> > + /*
> > + * Used to serialize access.
> > + */
>
> This comment seems redundant.
Ok I will update this in next version to say that it serializes access to different v4l subdev functions.
>
> > + struct mutex lock;
> > + struct media_pad pads[XILINX_CSI_MEDIA_PADS];
> > + unsigned int npads;
> > + bool streaming;
> > + bool suspended;
> > +};
> > +
> > +static inline struct xcsi2rxss_state *
> > +to_xcsi2rxssstate(struct v4l2_subdev *subdev)
> > +{
> > + return container_of(subdev, struct xcsi2rxss_state, subdev);
> > +}
> > +
> > +/*
> > + * Register related operations
> > + */
> > +static inline u32 xcsi2rxss_read(struct xcsi2rxss_core *xcsi2rxss,
> > + u32 addr)
> > +{
> > + return ioread32(xcsi2rxss->iomem + addr);
> > +}
> > +
> > +static inline void xcsi2rxss_write(struct xcsi2rxss_core *xcsi2rxss,
> > + u32 addr, u32 value)
> > +{
> > + iowrite32(value, xcsi2rxss->iomem + addr);
> > +}
> > +
> > +static inline void xcsi2rxss_clr(struct xcsi2rxss_core *xcsi2rxss,
> > + u32 addr, u32 clr)
> > +{
> > + xcsi2rxss_write(xcsi2rxss,
> > + addr,
>
> Fits on previous line.
Ok. I will move this and other instances to previous line in next version.
I added like this as it makes it clear to count the number of arguments passed to the function.
>
> > + xcsi2rxss_read(xcsi2rxss, addr) & ~clr);
> > +}
> > +
> > +static inline void xcsi2rxss_set(struct xcsi2rxss_core *xcsi2rxss,
> > + u32 addr, u32 set)
> > +{
> > + xcsi2rxss_write(xcsi2rxss,
> > + addr,
>
> Ditto.
>
> > + xcsi2rxss_read(xcsi2rxss, addr) | set);
> > +}
> > +
> > +static const struct pixel_format pixel_formats[] = {
> > + { MIPI_CSI_DT_YUV_420_8B, "YUV420_8bit" },
> > + { MIPI_CSI_DT_YUV_420_10B, "YUV420_10bit" },
> > + { MIPI_CSI_DT_YUV_420_8B_LEGACY, "Legacy_YUV420_8bit" },
> > + { MIPI_CSI_DT_YUV_420_8B_CSPS, "YUV420_8bit_CSPS" },
> > + { MIPI_CSI_DT_YUV_420_10B_CSPS, "YUV420_10bit_CSPS" },
> > + { MIPI_CSI_DT_YUV_422_8B, "YUV422_8bit" },
> > + { MIPI_CSI_DT_YUV_422_10B, "YUV422_10bit" },
> > + { MIPI_CSI_DT_RGB_444, "RGB444" },
> > + { MIPI_CSI_DT_RGB_555, "RGB555" },
> > + { MIPI_CSI_DT_RGB_565, "RGB565" },
> > + { MIPI_CSI_DT_RGB_666, "RGB666" },
> > + { MIPI_CSI_DT_RGB_888, "RGB888" },
> > + { MIPI_CSI_DT_RAW_6, "RAW6" },
> > + { MIPI_CSI_DT_RAW_7, "RAW7" },
> > + { MIPI_CSI_DT_RAW_8, "RAW8" },
> > + { MIPI_CSI_DT_RAW_10, "RAW10" },
> > + { MIPI_CSI_DT_RAW_12, "RAW12" },
> > + { MIPI_CSI_DT_RAW_14, "RAW14 "}
> > +};
> > +
> > +static struct xcsi2rxss_event xcsi2rxss_events[] = {
> > + { XCSI_ISR_FR_MASK, "Frame Received", 0 },
> > + { XCSI_ISR_ILC_MASK, "Invalid Lane Count Error", 0 },
> > + { XCSI_ISR_SPFIFOF_MASK, "Short Packet FIFO OverFlow Error", 0 },
> > + { XCSI_ISR_SPFIFONE_MASK, "Short Packet FIFO Not Empty", 0 },
> > + { XCSI_ISR_SLBF_MASK, "Streamline Buffer Full Error", 0 },
> > + { XCSI_ISR_STOP_MASK, "Lane Stop State", 0 },
> > + { XCSI_ISR_SOTERR_MASK, "SOT Error", 0 },
> > + { XCSI_ISR_SOTSYNCERR_MASK, "SOT Sync Error", 0 },
> > + { XCSI_ISR_ECC2BERR_MASK, "2 Bit ECC Unrecoverable Error", 0 },
> > + { XCSI_ISR_ECC1BERR_MASK, "1 Bit ECC Recoverable Error", 0 },
> > + { XCSI_ISR_CRCERR_MASK, "CRC Error", 0 },
> > + { XCSI_ISR_DATAIDERR_MASK, "Data Id Error", 0 },
> > + { XCSI_ISR_VC3FSYNCERR_MASK, "Virtual Channel 3 Frame Sync Error",
> 0 },
> > + { XCSI_ISR_VC3FLVLERR_MASK, "Virtual Channel 3 Frame Level Error", 0
> },
> > + { XCSI_ISR_VC2FSYNCERR_MASK, "Virtual Channel 2 Frame Sync Error",
> 0 },
> > + { XCSI_ISR_VC2FLVLERR_MASK, "Virtual Channel 2 Frame Level Error", 0
> },
> > + { XCSI_ISR_VC1FSYNCERR_MASK, "Virtual Channel 1 Frame Sync Error",
> 0 },
> > + { XCSI_ISR_VC1FLVLERR_MASK, "Virtual Channel 1 Frame Level Error", 0
> },
> > + { XCSI_ISR_VC0FSYNCERR_MASK, "Virtual Channel 0 Frame Sync Error",
> 0 },
> > + { XCSI_ISR_VC0FLVLERR_MASK, "Virtual Channel 0 Frame Level Error", 0
> }
> > +};
> > +
> > +#define XMIPICSISS_NUM_EVENTS ARRAY_SIZE(xcsi2rxss_events)
> > +
> > +/**
> > + * xcsi2rxss_clr_and_set - Clear and set the register with a bitmask
> > + * @xcsi2rxss: Xilinx MIPI CSI2 Rx Subsystem subdev core struct
> > + * @addr: address of register
> > + * @clr: bitmask to be cleared
> > + * @set: bitmask to be set
> > + *
> > + * Clear a bit(s) of mask @clr in the register at address @addr, then set
> > + * a bit(s) of mask @set in the register after.
> > + */
> > +static void xcsi2rxss_clr_and_set(struct xcsi2rxss_core *xcsi2rxss,
> > + u32 addr, u32 clr, u32 set)
> > +{
> > + u32 reg;
> > +
> > + reg = xcsi2rxss_read(xcsi2rxss, addr);
> > + reg &= ~clr;
> > + reg |= set;
> > + xcsi2rxss_write(xcsi2rxss, addr, reg);
> > +}
> > +
> > +/**
> > + * xcsi2rxss_pxlfmtstrtodt - Convert pixel format string got from dts
> > + * to data type.
> > + * @pxlfmtstr: String obtained while parsing device node
> > + *
> > + * This function takes a CSI pixel format string obtained while parsing
> > + * device tree node and converts it to data type.
> > + *
> > + * Eg. "RAW8" string is converted to 0x2A.
> > + * Refer to MIPI CSI2 specification for details.
> > + *
> > + * Return: Equivalent pixel format value from table
> > + */
> > +static u32 xcsi2rxss_pxlfmtstrtodt(const char *pxlfmtstr)
> > +{
> > + u32 i;
> > + u32 maxentries = ARRAY_SIZE(pixel_formats);
> > +
> > + for (i = 0; i < maxentries; i++) {
> > + if (!strncmp(pixel_formats[i].pixelformatstr,
> > + pxlfmtstr, MAX_XIL_CSIDT_STR_LENGTH))
> > + return pixel_formats[i].pixelformat;
> > + }
> > +
> > + return -EINVAL;
> > +}
> > +
> > +/**
> > + * xcsi2rxss_pxlfmtdttostr - Convert pixel format data type to string.
> > + * @datatype: MIPI CSI-2 Data Type
> > + *
> > + * This function takes a CSI pixel format data type and returns a
> > + * pointer to the string name.
> > + *
> > + * Eg. 0x2A returns "RAW8" string.
> > + * Refer to MIPI CSI2 specification for details.
> > + *
> > + * Return: Equivalent pixel format string from table
> > + */
> > +static const char *xcsi2rxss_pxlfmtdttostr(u32 datatype)
> > +{
> > + u32 i;
> > + u32 maxentries = ARRAY_SIZE(pixel_formats);
> > +
> > + for (i = 0; i < maxentries; i++) {
> > + if (pixel_formats[i].pixelformat == datatype)
> > + return pixel_formats[i].pixelformatstr;
> > + }
> > +
> > + return NULL;
> > +}
> > +
> > +/**
> > + * xcsi2rxss_enable - Enable or disable the CSI Core
> > + * @core: Core Xilinx CSI2 Rx Subsystem structure pointer
> > + * @flag: true for enabling, false for disabling
> > + *
> > + * This function enables/disables the MIPI CSI2 Rx Subsystem core.
> > + * After enabling the CSI2 Rx core, the DPHY is enabled in case the
> > + * register interface for it is present.
> > + */
> > +static void xcsi2rxss_enable(struct xcsi2rxss_core *core, bool flag)
> > +{
> > + u32 dphyctrlregoffset = core->dphy_offset + XDPHY_CTRLREG_OFFSET;
> > +
> > + if (flag) {
> > + xcsi2rxss_write(core, XCSI_CCR_OFFSET,
> XCSI_CCR_COREENB_MASK);
> > + if (core->dphy_present)
> > + xcsi2rxss_write(core, dphyctrlregoffset,
> > + XDPHY_CTRLREG_DPHYEN_MASK);
> > + } else {
> > + xcsi2rxss_write(core, XCSI_CCR_OFFSET, 0);
> > + if (core->dphy_present)
> > + xcsi2rxss_write(core, dphyctrlregoffset, 0);
> > + }
> > +}
> > +
> > +/**
> > + * xcsi2rxss_interrupts_enable - Enable or disable CSI interrupts
> > + * @core: Core Xilinx CSI2 Rx Subsystem structure pointer
> > + * @flag: true for enabling, false for disabling
> > + *
> > + * This function enables/disables the interrupts for the MIPI CSI2
> > + * Rx Subsystem.
> > + */
> > +static void xcsi2rxss_interrupts_enable(struct xcsi2rxss_core *core, bool
> flag)
> > +{
> > + if (flag) {
> > + xcsi2rxss_clr(core, XCSI_GIER_OFFSET, XCSI_GIER_GIE_MASK);
> > + xcsi2rxss_write(core, XCSI_IER_OFFSET, XCSI_INTR_MASK);
> > + xcsi2rxss_set(core, XCSI_GIER_OFFSET, XCSI_GIER_GIE_MASK);
> > + } else {
> > + xcsi2rxss_clr(core, XCSI_IER_OFFSET, XCSI_INTR_MASK);
> > + xcsi2rxss_clr(core, XCSI_GIER_OFFSET, XCSI_GIER_GIE_MASK);
> > + }
> > +}
> > +
> > +/**
> > + * xcsi2rxss_reset - Does a soft reset of the MIPI CSI2 Rx Subsystem
> > + * @core: Core Xilinx CSI2 Rx Subsystem structure pointer
> > + *
> > + * Return: 0 - on success OR -ETIME if reset times out
> > + */
> > +static int xcsi2rxss_reset(struct xcsi2rxss_core *core)
> > +{
> > + u32 timeout = XCSI_TIMEOUT_VAL;
> > +
> > + xcsi2rxss_set(core, XCSI_CCR_OFFSET, XCSI_CCR_SOFTRESET_MASK);
> > +
> > + while (xcsi2rxss_read(core, XCSI_CSR_OFFSET) &
> XCSI_CSR_RIPCD_MASK) {
> > + if (timeout == 0) {
> > + dev_err(core->dev, "Xilinx CSI2 Rx Subsystem Soft Reset
> Timeout!\n");
> > + return -ETIME;
> > + }
> > +
> > + timeout--;
> > + udelay(1);
> > + }
> > +
> > + xcsi2rxss_clr(core, XCSI_CCR_OFFSET, XCSI_CCR_SOFTRESET_MASK);
> > + return 0;
> > +}
> > +
> > +/**
> > + * xcsi2rxss_irq_handler - Interrupt handler for CSI-2
> > + * @irq: IRQ number
> > + * @dev_id: Pointer to device state
> > + *
> > + * In the interrupt handler, a list of event counters are updated for
> > + * corresponding interrupts. This is useful to get status / debug.
> > + * If the short packet FIFO not empty or overflow interrupt is received
> > + * capture the short packet and notify of event occurrence
> > + *
> > + * Return: IRQ_HANDLED after handling interrupts
> > + */
> > +static irqreturn_t xcsi2rxss_irq_handler(int irq, void *dev_id)
> > +{
> > + struct xcsi2rxss_state *state = (struct xcsi2rxss_state *)dev_id;
> > + struct xcsi2rxss_core *core = &state->core;
> > + u32 status;
> > +
> > + status = xcsi2rxss_read(core, XCSI_ISR_OFFSET) & XCSI_INTR_MASK;
> > + dev_dbg(core->dev, "interrupt status = 0x%08x\n", status);
> > +
> > + if (!status)
> > + return IRQ_NONE;
> > +
> > + if (status & XCSI_ISR_SPFIFONE_MASK) {
> > + memset(&state->event, 0, sizeof(state->event));
> > +
> > + state->event.type = V4L2_EVENT_XLNXCSIRX_SPKT;
> > +
> > + *((u32 *)(&state->event.u.data)) =
> > + xcsi2rxss_read(core, XCSI_SPKTR_OFFSET);
> > +
> > + v4l2_subdev_notify_event(&state->subdev, &state->event);
> > + }
> > +
> > + if (status & XCSI_ISR_SPFIFOF_MASK) {
> > + dev_alert(core->dev, "Short packet FIFO overflowed\n");
> > +
> > + memset(&state->event, 0, sizeof(state->event));
> > +
> > + state->event.type = V4L2_EVENT_XLNXCSIRX_SPKT_OVF;
> > +
> > + v4l2_subdev_notify_event(&state->subdev, &state->event);
> > + }
> > +
> > + if (status & XCSI_ISR_SLBF_MASK) {
> > + dev_alert(core->dev, "Stream Line Buffer Full!\n");
> > +
> > + memset(&state->event, 0, sizeof(state->event));
> > +
> > + state->event.type = V4L2_EVENT_XLNXCSIRX_SLBF;
> > +
> > + v4l2_subdev_notify_event(&state->subdev, &state->event);
> > + }
>
> This is really low level stuff. What would be the purpose of informing the
> user space on individual short or long packets? Other CSI-2 receiver
> drivers don't do it either.
>
Refer to section 9.9 line 867 - 871 in specification for CSI-2 version 2.0 07-Dec-2016 for details.
This is to send Generic Short packets (Data Type 0x08 to 0x0F) containing information like
opening/closing of shutters, triggering flashes, etc to application layer.
Other short packets like Frame Start/end, Line start/end, etc aren't sent to application layer.
> > +
> > + if (status & XCSI_ISR_ALLINTR_MASK) {
> > + unsigned int i;
> > +
> > + for (i = 0; i < XMIPICSISS_NUM_EVENTS; i++) {
> > + if (!(status & core->events[i].mask))
> > + continue;
> > + core->events[i].counter++;
> > + dev_dbg(core->dev, "%s: %d\n", core->events[i].name,
> > + core->events[i].counter);
> > + }
> > + }
> > +
> > + xcsi2rxss_write(core, XCSI_ISR_OFFSET, status);
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static void xcsi2rxss_reset_event_counters(struct xcsi2rxss_state *state)
> > +{
> > + u32 i;
> > +
> > + for (i = 0; i < XMIPICSISS_NUM_EVENTS; i++)
> > + state->core.events[i].counter = 0;
> > +}
> > +
> > +/**
> > + * xcsi2rxss_log_counters - Print out the event counters.
> > + * @state: Pointer to device state
> > + *
> > + */
> > +static void xcsi2rxss_log_counters(struct xcsi2rxss_state *state)
> > +{
> > + u32 i;
> > +
> > + for (i = 0; i < XMIPICSISS_NUM_EVENTS; i++) {
> > + if (state->core.events[i].counter > 0)
> > + v4l2_info(&state->subdev, "%s events: %d\n",
> > + state->core.events[i].name,
> > + state->core.events[i].counter);
> > + }
> > +}
> > +
> > +/**
> > + * xcsi2rxss_log_status - Logs the status of the CSI-2 Receiver
> > + * @sd: Pointer to V4L2 subdevice structure
> > + *
> > + * This function prints the current status of Xilinx MIPI CSI-2
> > + *
> > + * Return: 0 on success
> > + */
> > +static int xcsi2rxss_log_status(struct v4l2_subdev *sd)
> > +{
> > + struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd);
> > + struct xcsi2rxss_core *core = &xcsi2rxss->core;
> > + u32 reg, data, i;
>
> unsigned int is fine for counters unless you specifically need a type such
> as u32.
>
Ok. Will update in next version.
> > +
> > + mutex_lock(&xcsi2rxss->lock);
> > +
> > + xcsi2rxss_log_counters(xcsi2rxss);
> > +
> > + v4l2_info(sd, "***** Core Status *****\n");
>
> Please use either v4l2_*() or dev_*() macros to print stuff but not both.
Ok. I will update it in next version.
>
> > + data = xcsi2rxss_read(core, XCSI_CSR_OFFSET);
> > + v4l2_info(sd, "Short Packet FIFO Full = %s\n",
> > + XCSI_GET_BITSET_STR(data, XCSI_CSR_SPFIFOFULL_MASK));
> > + v4l2_info(sd, "Short Packet FIFO Not Empty = %s\n",
> > + XCSI_GET_BITSET_STR(data, XCSI_CSR_SPFIFONE_MASK));
> > + v4l2_info(sd, "Stream line buffer full = %s\n",
> > + XCSI_GET_BITSET_STR(data, XCSI_CSR_SLBF_MASK));
> > + v4l2_info(sd, "Soft reset/Core disable in progress = %s\n",
> > + XCSI_GET_BITSET_STR(data, XCSI_CSR_RIPCD_MASK));
> > +
> > + /* Clk & Lane Info */
> > + v4l2_info(sd, "******** Clock Lane Info *********\n");
> > + data = xcsi2rxss_read(core, XCSI_CLKINFR_OFFSET);
> > + v4l2_info(sd, "Clock Lane in Stop State = %s\n",
> > + XCSI_GET_BITSET_STR(data, XCSI_CLKINFR_STOP_MASK));
> > +
> > + v4l2_info(sd, "******** Data Lane Info *********\n");
> > + v4l2_info(sd, "Lane\tSoT Error\tSoT Sync Error\tStop State\n");
> > + reg = XCSI_L0INFR_OFFSET;
> > + for (i = 0; i < 4; i++) {
>
> It'd be nice to have a humna-readable name for 4?
Yes. It was the number of Lanes. I will add a macro for it.
>
> > + data = xcsi2rxss_read(core, reg);
> > +
> > + v4l2_info(sd, "%d\t%s\t\t%s\t\t%s\n",
> > + i,
> > + XCSI_GET_BITSET_STR(data, XCSI_LXINFR_SOTERR_MASK),
> > + data & XCSI_LXINFR_SOTSYNCERR_MASK ? "true" : "false",
> > + XCSI_GET_BITSET_STR(data, XCSI_LXINFR_STOP_MASK));
> > +
> > + reg += 4;
> > + }
> > +
> > + /* Virtual Channel Image Information */
> > + v4l2_info(sd, "********** Virtual Channel Info ************\n");
> > + v4l2_info(sd, "VC\tLine Count\tByte Count\tData Type\n");
> > + reg = XCSI_VC0INF1R_OFFSET;
> > + for (i = 0; i < 4; i++) {
> > + u32 line_count, byte_count, data_type;
> > + char *datatypestr;
> > +
> > + /* Get line and byte count from VCXINFR1 Register */
> > + data = xcsi2rxss_read(core, reg);
> > + byte_count = (data & XCSI_VCXINF1R_BYTECOUNT_MASK) >>
> > + XCSI_VCXINF1R_BYTECOUNT_SHIFT;
> > + line_count = (data & XCSI_VCXINF1R_LINECOUNT_MASK) >>
> > + XCSI_VCXINF1R_LINECOUNT_SHIFT;
> > +
> > + /* Get data type from VCXINFR2 Register */
> > + reg += 4;
> > + data = xcsi2rxss_read(core, reg);
> > + data_type = (data & XCSI_VCXINF2R_DATATYPE_MASK) >>
> > + XCSI_VCXINF2R_DATATYPE_SHIFT;
> > + datatypestr = (char *)xcsi2rxss_pxlfmtdttostr(data_type);
> > +
> > + v4l2_info(sd, "%d\t%d\t\t%d\t\t%s\n",
> > + i, line_count, byte_count, datatypestr);
> > +
> > + /* Move to next pair of VC Info registers */
> > + reg += 4;
> > + }
> > +
> > + mutex_unlock(&xcsi2rxss->lock);
> > +
> > + return 0;
> > +}
> > +
> > +/*
> > + * xcsi2rxss_subscribe_event - Subscribe to the custom short packet
> > + * receive event.
> > + * @sd: V4L2 Sub device
> > + * @fh: V4L2 File Handle
> > + * @sub: Subcribe event structure
> > + *
> > + * There are two types of events to be subscribed.
> > + *
> > + * First is to register for receiving a short packet.
> > + * The short packets received are queued up in a FIFO.
> > + * On reception of a short packet, an event will be generated
> > + * with the short packet contents copied to its data area.
> > + * Application subscribed to this event will poll for POLLPRI.
> > + * On getting the event, the app dequeues the event to get the short packet
> > + * data.
> > + *
> > + * Second is to register for Short packet FIFO overflow
> > + * In case the rate of receiving short packets is high and
> > + * the short packet FIFO overflows, this event will be triggered.
> > + *
> > + * Return: 0 on success, errors otherwise
> > + */
> > +static int xcsi2rxss_subscribe_event(struct v4l2_subdev *sd,
> > + struct v4l2_fh *fh,
> > + struct v4l2_event_subscription *sub)
> > +{
> > + int ret;
>
> Please declare return values, temporary variables etc. as last.
Ok. I will update this and others in next version.
>
> > + struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd);
> > +
> > + mutex_lock(&xcsi2rxss->lock);
> > +
> > + switch (sub->type) {
> > + case V4L2_EVENT_XLNXCSIRX_SPKT:
> > + case V4L2_EVENT_XLNXCSIRX_SPKT_OVF:
> > + case V4L2_EVENT_XLNXCSIRX_SLBF:
> > + ret = v4l2_event_subscribe(fh, sub, XCSI_MAX_SPKT, NULL);
> > + break;
> > + default:
> > + ret = -EINVAL;
> > + }
> > +
> > + mutex_unlock(&xcsi2rxss->lock);
> > +
> > + return ret;
> > +}
> > +
> > +/**
> > + * xcsi2rxss_unsubscribe_event - Unsubscribe from all events registered
> > + * @sd: V4L2 Sub device
> > + * @fh: V4L2 file handle
> > + * @sub: pointer to Event unsubscription structure
> > + *
> > + * Return: zero on success, else a negative error code.
> > + */
> > +static int xcsi2rxss_unsubscribe_event(struct v4l2_subdev *sd,
> > + struct v4l2_fh *fh,
> > + struct v4l2_event_subscription *sub)
> > +{
> > + int ret = 0;
> > + struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd);
> > +
> > + mutex_lock(&xcsi2rxss->lock);
> > + ret = v4l2_event_unsubscribe(fh, sub);
> > + mutex_unlock(&xcsi2rxss->lock);
> > +
> > + return ret;
> > +}
> > +
> > +/**
> > + * xcsi2rxss_s_ctrl - This is used to set the Xilinx MIPI CSI-2 V4L2 controls
> > + * @ctrl: V4L2 control to be set
> > + *
> > + * This function is used to set the V4L2 controls for the Xilinx MIPI
> > + * CSI-2 Rx Subsystem. It is used to set the active lanes in the system.
> > + * The event counters can be reset.
> > + *
> > + * Return: 0 on success, errors otherwise
> > + */
> > +static int xcsi2rxss_s_ctrl(struct v4l2_ctrl *ctrl)
> > +{
> > + int ret = 0;
> > + u32 timeout = XCSI_TIMEOUT_VAL;
> > + u32 active_lanes = 1;
> > +
> > + struct xcsi2rxss_state *xcsi2rxss =
> > + container_of(ctrl->handler,
> > + struct xcsi2rxss_state, ctrl_handler);
> > + struct xcsi2rxss_core *core = &xcsi2rxss->core;
> > +
> > + mutex_lock(&xcsi2rxss->lock);
> > +
> > + switch (ctrl->id) {
> > + case V4L2_CID_XILINX_MIPICSISS_ACT_LANES:
> > + /*
> > + * This will be called only when "Enable Active Lanes" parameter
> > + * is set in design
> > + */
> > + xcsi2rxss_clr_and_set(core, XCSI_PCR_OFFSET,
> > + XCSI_PCR_ACTLANES_MASK, ctrl->val - 1);
>
> Controls is not the mechanism to choose the number of active lanes --- at
> least not on the receiver side. Please stick to the number of connected
> lanes (data-lanes property); an alternative is to use frame descriptors.
> There's a patchset around; I can find a pointer if you're interested.
>
Ok. Please share the patchset.
This is a run time configurable property.
We can have a design time configuration as 4 lanes but at run time config as 2 lanes depending on what the connected CSI2 Tx device supports.
Please let me know if there is a way to get this info from the upstream driver like camera sensor driver..
> > +
> > + /*
> > + * If the core is enabled, wait for active lanes to be
> > + * set.
> > + *
> > + * If core is disabled or there is no clock from DPHY Tx
> > + * then the read back won't reflect the updated value
> > + * as the PPI clock will not be present.
> > + */
> > +
> > + if (core->dphy_present) {
> > + u32 dphyclkstatregoffset = core->dphy_offset +
> > + XDPHY_CLKSTATREG_OFFSET;
> > +
> > + u32 dphyclkstat =
> > + xcsi2rxss_read(core, dphyclkstatregoffset) &
> > + XDPHY_CLKSTATREG_MODE_MASK;
> > +
> > + u32 coreenable =
> > + xcsi2rxss_read(core, XCSI_CCR_OFFSET) &
> > + XCSI_CCR_COREENB_MASK;
> > +
> > + char lpmstr[] = "Low Power";
> > + char hsmstr[] = "High Speed";
> > + char esmstr[] = "Escape";
> > + char *modestr;
> > +
> > + switch (dphyclkstat) {
> > + case 0:
> > + modestr = lpmstr;
> > + break;
> > + case 1:
> > + modestr = hsmstr;
> > + break;
> > + case 2:
> > + modestr = esmstr;
> > + break;
> > + default:
> > + modestr = NULL;
> > + break;
> > + }
> > +
> > + dev_dbg(core->dev, "DPHY Clock Lane in %s mode\n",
> > + modestr);
> > +
> > + if (dphyclkstat == XDPHY_HI_SPEED_MODE &&
> > + coreenable) {
> > + /* Wait for core to apply new active lanes */
> > + while (timeout--)
> > + udelay(1);
> > +
> > + active_lanes =
> > + xcsi2rxss_read(core, XCSI_PCR_OFFSET);
> > + active_lanes &= XCSI_PCR_ACTLANES_MASK;
> > + active_lanes++;
> > +
> > + if (active_lanes != (u32)ctrl->val) {
> > + dev_err(core->dev, "Failed to set active lanes!\n");
> > + ret = -EAGAIN;
> > + }
> > + }
> > + } else {
> > + dev_dbg(core->dev, "No read back as no DPHY present.\n");
> > + }
> > +
> > + dev_dbg(core->dev, "Set active lanes: requested = %d, active =
> %d\n",
> > + ctrl->val, active_lanes);
> > + break;
> > + case V4L2_CID_XILINX_MIPICSISS_RESET_COUNTERS:
> > + xcsi2rxss_reset_event_counters(xcsi2rxss);
> > + break;
> > + default:
> > + break;
> > + }
> > +
> > + mutex_unlock(&xcsi2rxss->lock);
> > +
> > + return ret;
> > +}
> > +
> > +/**
> > + * xcsi2rxss_g_volatile_ctrl - get the Xilinx MIPI CSI-2 Rx controls
> > + * @ctrl: Pointer to V4L2 control
> > + *
> > + * This is used to get the number of frames received by the Xilinx
> > + * MIPI CSI-2 Rx.
> > + *
> > + * Return: 0 on success, errors otherwise
> > + */
> > +static int xcsi2rxss_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
> > +{
> > + int ret = 0;
> > + struct xcsi2rxss_state *xcsi2rxss =
> > + container_of(ctrl->handler,
> > + struct xcsi2rxss_state, ctrl_handler);
> > +
> > + mutex_lock(&xcsi2rxss->lock);
> > +
> > + switch (ctrl->id) {
> > + case V4L2_CID_XILINX_MIPICSISS_FRAME_COUNTER:
> > + ctrl->val = xcsi2rxss->core.events[0].counter;
> > + break;
> > + default:
> > + ret = -EINVAL;
> > + }
> > +
> > + mutex_unlock(&xcsi2rxss->lock);
> > +
> > + return ret;
> > +}
> > +
> > +static int xcsi2rxss_start_stream(struct xcsi2rxss_state *xcsi2rxss)
> > +{
> > + int ret;
> > +
> > + xcsi2rxss_enable(&xcsi2rxss->core, true);
> > +
> > + ret = xcsi2rxss_reset(&xcsi2rxss->core);
> > + if (ret < 0)
> > + return ret;
> > +
> > + xcsi2rxss_interrupts_enable(&xcsi2rxss->core, true);
> > +
> > + return 0;
> > +}
> > +
> > +static void xcsi2rxss_stop_stream(struct xcsi2rxss_state *xcsi2rxss)
> > +{
> > + xcsi2rxss_interrupts_enable(&xcsi2rxss->core, false);
> > + xcsi2rxss_enable(&xcsi2rxss->core, false);
> > +}
> > +
> > +/**
> > + * xcsi2rxss_s_stream - It is used to start/stop the streaming.
> > + * @sd: V4L2 Sub device
> > + * @enable: Flag (True / False)
> > + *
> > + * This function controls the start or stop of streaming for the
> > + * Xilinx MIPI CSI-2 Rx Subsystem provided the device isn't in
> > + * suspended state.
> > + *
> > + * Return: 0 on success, errors otherwise
> > + */
> > +static int xcsi2rxss_s_stream(struct v4l2_subdev *sd, int enable)
> > +{
> > + int ret = 0;
> > + struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd);
> > +
> > + mutex_lock(&xcsi2rxss->lock);
> > +
> > + if (xcsi2rxss->suspended) {
> > + ret = -EBUSY;
> > + goto unlock;
> > + }
> > +
> > + if (enable) {
> > + if (!xcsi2rxss->streaming) {
> > + /* reset the event counters */
> > + xcsi2rxss_reset_event_counters(xcsi2rxss);
> > +
> > + ret = xcsi2rxss_start_stream(xcsi2rxss);
> > + if (ret == 0)
> > + xcsi2rxss->streaming = true;
> > + }
> > + } else {
> > + if (xcsi2rxss->streaming) {
> > + xcsi2rxss_stop_stream(xcsi2rxss);
> > + xcsi2rxss->streaming = false;
> > + }
> > + }
> > +unlock:
> > + mutex_unlock(&xcsi2rxss->lock);
> > + return ret;
> > +}
> > +
> > +static struct v4l2_mbus_framefmt *
> > +__xcsi2rxss_get_pad_format(struct xcsi2rxss_state *xcsi2rxss,
> > + struct v4l2_subdev_pad_config *cfg,
> > + unsigned int pad, u32 which)
> > +{
> > + switch (which) {
> > + case V4L2_SUBDEV_FORMAT_TRY:
> > + return v4l2_subdev_get_try_format(&xcsi2rxss->subdev, cfg, pad);
> > + case V4L2_SUBDEV_FORMAT_ACTIVE:
> > + return &xcsi2rxss->formats[pad];
> > + default:
> > + return NULL;
> > + }
> > +}
> > +
> > +/**
> > + * xcsi2rxss_get_format - Get the pad format
> > + * @sd: Pointer to V4L2 Sub device structure
> > + * @cfg: Pointer to sub device pad information structure
> > + * @fmt: Pointer to pad level media bus format
> > + *
> > + * This function is used to get the pad format information.
> > + *
> > + * Return: 0 on success
> > + */
> > +static int xcsi2rxss_get_format(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_pad_config *cfg,
> > + struct v4l2_subdev_format *fmt)
> > +{
> > + struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd);
> > +
> > + mutex_lock(&xcsi2rxss->lock);
> > + fmt->format = *__xcsi2rxss_get_pad_format(xcsi2rxss, cfg,
> > + fmt->pad, fmt->which);
> > + mutex_unlock(&xcsi2rxss->lock);
> > +
> > + return 0;
> > +}
> > +
> > +/**
> > + * xcsi2rxss_set_format - This is used to set the pad format
> > + * @sd: Pointer to V4L2 Sub device structure
> > + * @cfg: Pointer to sub device pad information structure
> > + * @fmt: Pointer to pad level media bus format
> > + *
> > + * This function is used to set the pad format.
> > + * Since the pad format is fixed in hardware, it can't be
> > + * modified on run time. So when a format set is requested by
> > + * application, all parameters except the format type is
> > + * saved for the pad and the original pad format is sent
> > + * back to the application.
> > + *
> > + * Return: 0 on success
> > + */
> > +static int xcsi2rxss_set_format(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_pad_config *cfg,
> > + struct v4l2_subdev_format *fmt)
> > +{
> > + struct v4l2_mbus_framefmt *__format;
> > + struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd);
> > + struct xcsi2rxss_core *core = &xcsi2rxss->core;
> > + u32 code;
> > +
> > + mutex_lock(&xcsi2rxss->lock);
> > +
> > + /*
> > + * Only the format->code parameter matters for CSI as the
> > + * CSI format cannot be changed at runtime.
> > + * Ensure that format to set is copied to over to CSI pad format
> > + */
> > + __format = __xcsi2rxss_get_pad_format(xcsi2rxss, cfg,
> > + fmt->pad, fmt->which);
> > +
> > + /* Save the pad format code */
> > + code = __format->code;
> > +
> > + /* If the bayer pattern to be set is SXXXX8 then only 1x8 type
> > + * is supported and core's data type doesn't matter.
> > + * In case the bayer pattern being set is SXXX10 then only
> > + * 1x10 type are supported and core should be configured for RAW10.
> > + * In case the bayer pattern being set is SXXX12 then only
> > + * 1x12 type are supported and core should be configured for RAW12.
> > + *
> > + * Otherwise don't allow change.
> > + */
> > + if ((fmt->format.code == MEDIA_BUS_FMT_SBGGR8_1X8 ||
> > + fmt->format.code == MEDIA_BUS_FMT_SGBRG8_1X8 ||
> > + fmt->format.code == MEDIA_BUS_FMT_SGRBG8_1X8 ||
> > + fmt->format.code == MEDIA_BUS_FMT_SRGGB8_1X8) ||
> > + (core->datatype == MIPI_CSI_DT_RAW_10 &&
> > + (fmt->format.code == MEDIA_BUS_FMT_SBGGR10_1X10 ||
> > + fmt->format.code == MEDIA_BUS_FMT_SGBRG10_1X10 ||
> > + fmt->format.code == MEDIA_BUS_FMT_SGRBG10_1X10 ||
> > + fmt->format.code == MEDIA_BUS_FMT_SRGGB10_1X10)) ||
> > + (core->datatype == MIPI_CSI_DT_RAW_12 &&
> > + (fmt->format.code == MEDIA_BUS_FMT_SBGGR12_1X12 ||
> > + fmt->format.code == MEDIA_BUS_FMT_SGBRG12_1X12 ||
> > + fmt->format.code == MEDIA_BUS_FMT_SGRBG12_1X12 ||
> > + fmt->format.code == MEDIA_BUS_FMT_SRGGB12_1X12))) {
> > + /* Copy over the format to be set */
> > + *__format = fmt->format;
> > + } else {
> > + /* Restore the original pad format code */
> > + fmt->format.code = code;
> > + __format->code = code;
> > + }
> > +
> > + mutex_unlock(&xcsi2rxss->lock);
> > +
> > + return 0;
> > +}
> > +
> > +/**
> > + * xcsi2rxss_open - Called on v4l2_open()
> > + * @sd: Pointer to V4L2 sub device structure
> > + * @fh: Pointer to V4L2 File handle
> > + *
> > + * This function is called on v4l2_open(). It sets the default format
> > + * for both pads.
> > + *
> > + * Return: 0 on success
> > + */
> > +static int xcsi2rxss_open(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_fh *fh)
> > +{
> > + struct v4l2_mbus_framefmt *format;
> > + struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd);
> > +
> > + format = v4l2_subdev_get_try_format(sd, fh->pad, 0);
> > + *format = xcsi2rxss->default_format;
> > +
> > + format = v4l2_subdev_get_try_format(sd, fh->pad, 1);
> > + *format = xcsi2rxss->default_format;
> > +
> > + return 0;
> > +}
> > +
> > +static int xcsi2rxss_close(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_fh *fh)
> > +{
> > + return 0;
> > +}
>
> You can drop the close callback if there's nothing to do there.
Ok. I will remove in next version.
>
> > +
> > +/* -----------------------------------------------------------------------------
> > + * Media Operations
> > + */
> > +
> > +static const struct media_entity_operations xcsi2rxss_media_ops = {
> > + .link_validate = v4l2_subdev_link_validate
> > +};
> > +
> > +static const struct v4l2_ctrl_ops xcsi2rxss_ctrl_ops = {
> > + .g_volatile_ctrl = xcsi2rxss_g_volatile_ctrl,
> > + .s_ctrl = xcsi2rxss_s_ctrl
> > +};
> > +
> > +static struct v4l2_ctrl_config xcsi2rxss_ctrls[] = {
> > + {
> > + .ops = &xcsi2rxss_ctrl_ops,
> > + .id = V4L2_CID_XILINX_MIPICSISS_ACT_LANES,
> > + .name = "MIPI CSI2 Rx Subsystem: Active Lanes",
> > + .type = V4L2_CTRL_TYPE_INTEGER,
> > + .min = 1,
> > + .max = 4,
> > + .step = 1,
> > + .def = 1,
> > + }, {
> > + .ops = &xcsi2rxss_ctrl_ops,
> > + .id = V4L2_CID_XILINX_MIPICSISS_FRAME_COUNTER,
> > + .name = "MIPI CSI2 Rx Subsystem: Frames Received Counter",
> > + .type = V4L2_CTRL_TYPE_INTEGER,
> > + .min = 0,
> > + .max = 0xFFFFFFFF,
> > + .step = 1,
> > + .def = 0,
> > + .flags = V4L2_CTRL_FLAG_VOLATILE |
> V4L2_CTRL_FLAG_READ_ONLY,
> > + }, {
> > + .ops = &xcsi2rxss_ctrl_ops,
> > + .id = V4L2_CID_XILINX_MIPICSISS_RESET_COUNTERS,
> > + .name = "MIPI CSI2 Rx Subsystem: Reset Counters",
> > + .type = V4L2_CTRL_TYPE_BUTTON,
> > + .min = 0,
> > + .max = 1,
> > + .step = 1,
> > + .def = 0,
> > + .flags = V4L2_CTRL_FLAG_WRITE_ONLY,
> > + }
> > +};
> > +
> > +static const struct v4l2_subdev_core_ops xcsi2rxss_core_ops = {
> > + .log_status = xcsi2rxss_log_status,
> > + .subscribe_event = xcsi2rxss_subscribe_event,
> > + .unsubscribe_event = xcsi2rxss_unsubscribe_event
> > +};
> > +
> > +static struct v4l2_subdev_video_ops xcsi2rxss_video_ops = {
> > + .s_stream = xcsi2rxss_s_stream
> > +};
> > +
> > +static struct v4l2_subdev_pad_ops xcsi2rxss_pad_ops = {
> > + .get_fmt = xcsi2rxss_get_format,
> > + .set_fmt = xcsi2rxss_set_format,
> > +};
> > +
> > +static struct v4l2_subdev_ops xcsi2rxss_ops = {
> > + .core = &xcsi2rxss_core_ops,
> > + .video = &xcsi2rxss_video_ops,
> > + .pad = &xcsi2rxss_pad_ops
> > +};
> > +
> > +static const struct v4l2_subdev_internal_ops xcsi2rxss_internal_ops = {
> > + .open = xcsi2rxss_open,
> > + .close = xcsi2rxss_close
> > +};
> > +
> > +/* -----------------------------------------------------------------------------
> > + * Power Management
> > + */
> > +
> > +/*
> > + * xcsi2rxss_pm_suspend - Function called on Power Suspend
> > + * @dev: Pointer to device structure
> > + *
> > + * On power suspend the CSI-2 Core is disabled if the device isn't
> > + * in suspended state and is streaming.
> > + *
> > + * Return: 0 on success
> > + */
> > +static int __maybe_unused xcsi2rxss_pm_suspend(struct device *dev)
> > +{
> > + struct xcsi2rxss_state *xcsi2rxss = dev_get_drvdata(dev);
> > +
> > + mutex_lock(&xcsi2rxss->lock);
> > +
> > + if (!xcsi2rxss->suspended && xcsi2rxss->streaming)
> > + xcsi2rxss_clr(&xcsi2rxss->core,
> > + XCSI_CCR_OFFSET, XCSI_CCR_COREENB_MASK);
> > +
> > + xcsi2rxss->suspended = true;
> > +
> > + mutex_unlock(&xcsi2rxss->lock);
> > +
> > + return 0;
> > +}
> > +
> > +/*
> > + * xcsi2rxss_pm_resume - Function called on Power Resume
> > + * @dev: Pointer to device structure
> > + *
> > + * On power resume the CSI-2 Core is enabled when it is in suspended state
> > + * and prior to entering suspended state it was streaming.
> > + *
> > + * Return: 0 on success
> > + */
> > +static int __maybe_unused xcsi2rxss_pm_resume(struct device *dev)
> > +{
> > + struct xcsi2rxss_state *xcsi2rxss = dev_get_drvdata(dev);
> > +
> > + mutex_lock(&xcsi2rxss->lock);
> > +
> > + if (xcsi2rxss->suspended && xcsi2rxss->streaming)
> > + xcsi2rxss_set(&xcsi2rxss->core,
> > + XCSI_CCR_OFFSET, XCSI_CCR_COREENB_MASK);
> > +
> > + xcsi2rxss->suspended = false;
> > +
> > + mutex_unlock(&xcsi2rxss->lock);
> > + return 0;
> > +}
> > +
> > +/* -----------------------------------------------------------------------------
> > + * Platform Device Driver
> > + */
> > +
> > +static int xcsi2rxss_parse_of(struct xcsi2rxss_state *xcsi2rxss)
> > +{
> > + struct device_node *node = xcsi2rxss->core.dev->of_node;
> > + struct device_node *ports = NULL;
> > + struct device_node *port = NULL;
> > + unsigned int nports = 0;
> > + struct xcsi2rxss_core *core = &xcsi2rxss->core;
> > + int ret;
> > + bool iic_present;
> > +
> > + core->dphy_present = of_property_read_bool(node, "xlnx,dphy-
> present");
> > + dev_dbg(core->dev, "DPHY present property = %s\n",
> > + core->dphy_present ? "Present" : "Absent");
> > +
> > + iic_present = of_property_read_bool(node, "xlnx,iic-present");
> > + dev_dbg(core->dev, "IIC present property = %s\n",
> > + iic_present ? "Present" : "Absent");
> > +
> > + if (core->dphy_present) {
> > + if (iic_present)
> > + core->dphy_offset = 0x20000;
> > + else
> > + core->dphy_offset = 0x10000;
> > + }
> > +
> > + ret = of_property_read_u32(node, "xlnx,max-lanes",
> > + &core->max_num_lanes);
> > + if (ret < 0) {
> > + dev_err(core->dev, "missing xlnx,max-lanes property\n");
> > + return ret;
> > + }
> > +
> > + if (core->max_num_lanes > 4 || core->max_num_lanes < 1) {
> > + dev_err(core->dev, "%d max lanes : invalid xlnx,max-lanes
> property\n",
> > + core->max_num_lanes);
> > + return -EINVAL;
> > + }
> > +
> > + ret = of_property_read_u32(node, "xlnx,vc", &core->vc);
> > + if (ret < 0) {
> > + dev_err(core->dev, "missing xlnx,vc property\n");
> > + return ret;
> > + }
> > + if (core->vc > 4) {
> > + dev_err(core->dev, "invalid virtual channel property value.\n");
> > + return -EINVAL;
> > + }
> > +
> > + core->enable_active_lanes =
> > + of_property_read_bool(node, "xlnx,en-active-lanes");
> > + dev_dbg(core->dev, "Enable active lanes property = %s\n",
> > + core->enable_active_lanes ? "Present" : "Absent");
> > +
> > + ret = of_property_read_string(node, "xlnx,csi-pxl-format",
> > + &core->pxlformat);
> > + if (ret < 0) {
> > + dev_err(core->dev, "missing xlnx,csi-pxl-format property\n");
> > + return ret;
> > + }
> > +
> > + core->datatype = xcsi2rxss_pxlfmtstrtodt(core->pxlformat);
> > + if (core->datatype < MIPI_CSI_DT_YUV_420_8B ||
> > + core->datatype > MIPI_CSI_DT_RAW_14) {
> > + dev_err(core->dev, "Invalid xlnx,csi-pxl-format string\n");
> > + return -EINVAL;
> > + }
> > +
> > + core->vfb = of_property_read_bool(node, "xlnx,vfb");
> > + dev_dbg(core->dev, "Video Format Bridge property = %s\n",
> > + core->vfb ? "Present" : "Absent");
> > +
> > + if (core->vfb) {
> > + ret = of_property_read_u32(node, "xlnx,ppc", &core->ppc);
> > + if (ret < 0 || !(core->ppc == 1 || core->ppc == 2 ||
> > + core->ppc == 4)) {
> > + dev_err(core->dev, "Invalid xlnx,ppc property ret = %d ppc =
> %d\n",
> > + ret, core->ppc);
> > + return -EINVAL;
> > + }
> > + }
> > +
> > + ports = of_get_child_by_name(node, "ports");
> > + if (!ports)
> > + ports = node;
> > +
> > + for_each_child_of_node(ports, port) {
> > + int ret;
> > + const struct xvip_video_format *format;
> > + struct device_node *endpoint;
> > + struct v4l2_fwnode_endpoint v4lendpoint;
> > +
> > + if (!port->name || of_node_cmp(port->name, "port"))
> > + continue;
> > +
> > + /*
> > + * Currently only a subset of VFB enabled formats present in
> > + * xvip are supported in the driver.
> > + *
> > + * If the VFB is disabled, the pixels per clock don't matter.
> > + * The data width is either 32 or 64 bit as selected in design.
> > + *
> > + * For e.g. If Data Type is RGB888, VFB is disabled and
> > + * data width is 32 bits.
> > + *
> > + * Clk Cycle | Byte 0 | Byte 1 | Byte 2 | Byte 3
> > + * -----------+----------+----------+----------+----------
> > + * 1 | B0 | G0 | R0 | B1
> > + * 2 | G1 | R1 | B2 | G2
> > + * 3 | R2 | B3 | G3 | R3
> > + */
> > + format = xvip_of_get_format(port);
> > + if (IS_ERR(format)) {
> > + dev_err(core->dev, "invalid format in DT");
> > + return PTR_ERR(format);
> > + }
> > +
> > + if (core->vfb &&
> > + format->vf_code != XVIP_VF_YUV_422 &&
> > + format->vf_code != XVIP_VF_RBG &&
> > + format->vf_code != XVIP_VF_MONO_SENSOR) {
> > + dev_err(core->dev, "Invalid UG934 video format set.\n");
> > + return -EINVAL;
> > + }
> > +
> > + /* Get and check the format description */
> > + if (!xcsi2rxss->vip_format) {
> > + xcsi2rxss->vip_format = format;
> > + } else if (xcsi2rxss->vip_format != format) {
> > + dev_err(core->dev, "in/out format mismatch in DT");
> > + return -EINVAL;
> > + }
> > +
> > + endpoint = of_get_next_child(port, NULL);
> > + if (!endpoint) {
> > + dev_err(core->dev, "No port at\n");
> > + return -EINVAL;
> > + }
> > +
> > + ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(endpoint),
> > + &v4lendpoint);
> > + if (ret) {
> > + of_node_put(endpoint);
> > + return ret;
> > + }
> > +
> > + of_node_put(endpoint);
> > + dev_dbg(core->dev, "%s : port %d bus type = %d\n",
> > + __func__, nports, v4lendpoint.bus_type);
> > +
> > + if (v4lendpoint.bus_type == V4L2_MBUS_CSI2) {
> > + dev_dbg(core->dev, "%s : base.port = %d base.id = %d\n",
> > + __func__, v4lendpoint.base.port,
> > + v4lendpoint.base.id);
> > +
> > + dev_dbg(core->dev, "%s : mipi number lanes = %d\n",
> > + __func__,
> > + v4lendpoint.bus.mipi_csi2.num_data_lanes);
> > + } else {
> > + dev_dbg(core->dev, "%s : Not a CSI2 bus\n", __func__);
> > + }
> > +
> > + /* Count the number of ports. */
> > + nports++;
> > + }
> > +
> > + if (nports != 2) {
> > + dev_err(core->dev, "invalid number of ports %u\n", nports);
> > + return -EINVAL;
> > + }
> > + xcsi2rxss->npads = nports;
> > +
> > + /*Register interrupt handler */
> > + core->irq = irq_of_parse_and_map(node, 0);
> > +
> > + ret = devm_request_irq(core->dev, core->irq, xcsi2rxss_irq_handler,
> > + IRQF_SHARED, "xilinx-csi2rxss", xcsi2rxss);
> > + if (ret) {
> > + dev_err(core->dev, "Err = %d Interrupt handler reg failed!\n",
> > + ret);
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int xcsi2rxss_probe(struct platform_device *pdev)
> > +{
> > + struct v4l2_subdev *subdev;
> > + struct xcsi2rxss_state *xcsi2rxss;
> > + struct resource *res;
> > +
> > + u32 i;
> > + int ret;
> > + int num_ctrls;
> > +
> > + xcsi2rxss = devm_kzalloc(&pdev->dev, sizeof(*xcsi2rxss), GFP_KERNEL);
> > + if (!xcsi2rxss)
> > + return -ENOMEM;
> > +
> > + mutex_init(&xcsi2rxss->lock);
> > +
> > + xcsi2rxss->core.dev = &pdev->dev;
> > +
> > + ret = xcsi2rxss_parse_of(xcsi2rxss);
> > + if (ret < 0)
> > + return ret;
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + xcsi2rxss->core.iomem = devm_ioremap_resource(xcsi2rxss->core.dev,
> res);
> > + if (IS_ERR(xcsi2rxss->core.iomem))
> > + return PTR_ERR(xcsi2rxss->core.iomem);
> > +
> > + /*
> > + * Reset and initialize the core.
> > + */
> > + xcsi2rxss_reset(&xcsi2rxss->core);
> > +
> > + xcsi2rxss->core.events = (struct xcsi2rxss_event *)&xcsi2rxss_events;
> > +
> > + /* Initialize V4L2 subdevice and media entity */
> > + xcsi2rxss->pads[0].flags = MEDIA_PAD_FL_SOURCE;
> > + xcsi2rxss->pads[1].flags = MEDIA_PAD_FL_SINK;
> > +
> > + /* Initialize the default format */
> > + memset(&xcsi2rxss->default_format, 0,
> > + sizeof(xcsi2rxss->default_format));
> > + xcsi2rxss->default_format.code = xcsi2rxss->vip_format->code;
> > + xcsi2rxss->default_format.field = V4L2_FIELD_NONE;
> > + xcsi2rxss->default_format.colorspace = V4L2_COLORSPACE_SRGB;
> > + xcsi2rxss->default_format.width = XCSI_DEFAULT_WIDTH;
> > + xcsi2rxss->default_format.height = XCSI_DEFAULT_HEIGHT;
> > +
> > + xcsi2rxss->formats[0] = xcsi2rxss->default_format;
> > + xcsi2rxss->formats[1] = xcsi2rxss->default_format;
> > +
> > + /* Initialize V4L2 subdevice and media entity */
> > + subdev = &xcsi2rxss->subdev;
> > + v4l2_subdev_init(subdev, &xcsi2rxss_ops);
> > +
> > + subdev->dev = &pdev->dev;
> > + subdev->internal_ops = &xcsi2rxss_internal_ops;
> > + strlcpy(subdev->name, dev_name(&pdev->dev), sizeof(subdev->name));
> > +
> > + subdev->flags |= V4L2_SUBDEV_FL_HAS_EVENTS |
> V4L2_SUBDEV_FL_HAS_DEVNODE;
> > +
> > + subdev->entity.ops = &xcsi2rxss_media_ops;
> > +
> > + v4l2_set_subdevdata(subdev, xcsi2rxss);
> > +
> > + ret = media_entity_pads_init(&subdev->entity, 2, xcsi2rxss->pads);
> > + if (ret < 0)
> > + goto error;
> > +
> > + /*
> > + * In case the Enable Active Lanes config parameter is not set,
> > + * dynamic lane reconfiguration is not allowed.
> > + * So V4L2_CID_XILINX_MIPICSISS_ACT_LANES ctrl will not be registered.
> > + * Accordingly allocate the number of controls
> > + */
> > + num_ctrls = ARRAY_SIZE(xcsi2rxss_ctrls);
> > +
> > + if (!xcsi2rxss->core.enable_active_lanes)
> > + num_ctrls--;
> > +
> > + dev_dbg(xcsi2rxss->core.dev, "# of ctrls = %d\n", num_ctrls);
> > +
> > + v4l2_ctrl_handler_init(&xcsi2rxss->ctrl_handler, num_ctrls);
> > +
> > + for (i = 0; i < ARRAY_SIZE(xcsi2rxss_ctrls); i++) {
> > + struct v4l2_ctrl *ctrl;
> > +
> > + if (xcsi2rxss_ctrls[i].id ==
> > + V4L2_CID_XILINX_MIPICSISS_ACT_LANES) {
> > + if (xcsi2rxss->core.enable_active_lanes) {
> > + xcsi2rxss_ctrls[i].max =
> > + xcsi2rxss->core.max_num_lanes;
> > + } else {
> > + /* Don't register control */
> > + dev_dbg(xcsi2rxss->core.dev,
> > + "Skip active lane control\n");
> > + continue;
> > + }
> > + }
> > +
> > + dev_dbg(xcsi2rxss->core.dev, "%d ctrl = 0x%x\n",
> > + i, xcsi2rxss_ctrls[i].id);
> > + ctrl = v4l2_ctrl_new_custom(&xcsi2rxss->ctrl_handler,
> > + &xcsi2rxss_ctrls[i], NULL);
> > + if (!ctrl) {
> > + dev_err(xcsi2rxss->core.dev, "Failed for %s ctrl\n",
> > + xcsi2rxss_ctrls[i].name);
> > + goto error;
> > + }
> > + }
> > +
> > + dev_dbg(xcsi2rxss->core.dev, "# v4l2 ctrls registered = %d\n", i - 1);
> > +
> > + if (xcsi2rxss->ctrl_handler.error) {
> > + dev_err(&pdev->dev, "failed to add controls\n");
> > + ret = xcsi2rxss->ctrl_handler.error;
> > + goto error;
> > + }
> > +
> > + subdev->ctrl_handler = &xcsi2rxss->ctrl_handler;
> > +
> > + ret = v4l2_ctrl_handler_setup(&xcsi2rxss->ctrl_handler);
> > + if (ret < 0) {
> > + dev_err(&pdev->dev, "failed to set controls\n");
> > + goto error;
> > + }
> > +
> > + platform_set_drvdata(pdev, xcsi2rxss);
> > +
> > + dev_info(xcsi2rxss->core.dev, "Xilinx CSI2 Rx Subsystem device
> found!\n");
> > +
> > + ret = v4l2_async_register_subdev(subdev);
> > + if (ret < 0) {
> > + dev_err(&pdev->dev, "failed to register subdev\n");
> > + goto error;
> > + }
> > +
> > + /* default states for streaming and suspend */
> > + xcsi2rxss->streaming = false;
> > + xcsi2rxss->suspended = false;
> > + return 0;
> > +
> > +error:
> > + v4l2_ctrl_handler_free(&xcsi2rxss->ctrl_handler);
> > + media_entity_cleanup(&subdev->entity);
> > + mutex_destroy(&xcsi2rxss->lock);
> > +
> > + return ret;
> > +}
> > +
> > +static int xcsi2rxss_remove(struct platform_device *pdev)
> > +{
> > + struct xcsi2rxss_state *xcsi2rxss = platform_get_drvdata(pdev);
> > + struct v4l2_subdev *subdev = &xcsi2rxss->subdev;
> > +
> > + v4l2_async_unregister_subdev(subdev);
> > + v4l2_ctrl_handler_free(&xcsi2rxss->ctrl_handler);
> > + media_entity_cleanup(&subdev->entity);
> > + mutex_destroy(&xcsi2rxss->lock);
> > +
> > + return 0;
> > +}
> > +
> > +static SIMPLE_DEV_PM_OPS(xcsi2rxss_pm_ops,
> > + xcsi2rxss_pm_suspend, xcsi2rxss_pm_resume);
> > +
> > +static const struct of_device_id xcsi2rxss_of_id_table[] = {
> > + { .compatible = "xlnx,mipi-csi2-rx-subsystem-2.0" },
> > + { .compatible = "xlnx,mipi-csi2-rx-subsystem-3.0" },
> > + { }
> > +};
> > +MODULE_DEVICE_TABLE(of, xcsi2rxss_of_id_table);
> > +
> > +static struct platform_driver xcsi2rxss_driver = {
> > + .driver = {
> > + .name = "xilinx-csi2rxss",
> > + .pm = &xcsi2rxss_pm_ops,
> > + .of_match_table = xcsi2rxss_of_id_table,
> > + },
> > + .probe = xcsi2rxss_probe,
> > + .remove = xcsi2rxss_remove,
> > +};
> > +module_platform_driver(xcsi2rxss_driver);
>
> A newline here would be nice.
Will add a new line here in next version.
Regards
Vishal Sagar
>
> > +MODULE_AUTHOR("Vishal Sagar <vishal.sagar@...inx.com>");
> > +MODULE_DESCRIPTION("Xilinx MIPI CSI2 Rx Subsystem Driver");
> > +MODULE_LICENSE("GPL v2");
> > diff --git a/include/uapi/linux/xilinx-csi2rxss.h b/include/uapi/linux/xilinx-
> csi2rxss.h
> > new file mode 100644
> > index 0000000..973d5b46
> > --- /dev/null
> > +++ b/include/uapi/linux/xilinx-csi2rxss.h
> > @@ -0,0 +1,25 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
> > +/*
> > + * Events from Xilinx MIPI CSI2 Rx Subsystem exposed to V4L2 application.
> > + *
> > + * Copyright (C) 2016 - 2018 Xilinx, Inc.
> > + * Author: Vishal Sagar <vishal.sagar@...inx.com>
> > + */
> > +#ifndef __UAPI_XILINX_CSI2RXSS_H__
> > +#define __UAPI_XILINX_CSI2RXSS_H__
> > +
> > +#include <linux/videodev2.h>
> > +
> > +/*
> > + * Events
> > + *
> > + * V4L2_EVENT_XLNXCSIRX_SPKT: Short packet received
> > + * V4L2_EVENT_XLNXCSIRX_SPKT_OVF: Short packet FIFO overflow
> > + * V4L2_EVENT_XLNXCSIRX_SLBF: Stream line buffer full
> > + */
> > +#define V4L2_EVENT_XLNXCSIRX_CLASS (V4L2_EVENT_PRIVATE_START |
> 0x100)
> > +#define V4L2_EVENT_XLNXCSIRX_SPKT (V4L2_EVENT_XLNXCSIRX_CLASS
> | 0x1)
> > +#define V4L2_EVENT_XLNXCSIRX_SPKT_OVF
> (V4L2_EVENT_XLNXCSIRX_CLASS | 0x2)
> > +#define V4L2_EVENT_XLNXCSIRX_SLBF (V4L2_EVENT_XLNXCSIRX_CLASS |
> 0x3)
> > +
> > +#endif /* __UAPI_XILINX_CSI2RXSS_H__ */
> > diff --git a/include/uapi/linux/xilinx-v4l2-controls.h
> b/include/uapi/linux/xilinx-v4l2-controls.h
> > index b6441fe..4ca3b44 100644
> > --- a/include/uapi/linux/xilinx-v4l2-controls.h
> > +++ b/include/uapi/linux/xilinx-v4l2-controls.h
> > @@ -71,4 +71,18 @@
> > /* Noise level */
> > #define V4L2_CID_XILINX_TPG_NOISE_GAIN (V4L2_CID_XILINX_TPG +
> 17)
> >
> > +/*
> > + * Xilinx MIPI CSI2 Rx Subsystem
> > + */
> > +
> > +/* Base ID */
> > +#define V4L2_CID_XILINX_MIPICSISS (V4L2_CID_USER_BASE +
> 0xc080)
> > +
> > +/* Active Lanes */
> > +#define V4L2_CID_XILINX_MIPICSISS_ACT_LANES
> (V4L2_CID_XILINX_MIPICSISS + 1)
> > +/* Frames received since streaming is set */
> > +#define V4L2_CID_XILINX_MIPICSISS_FRAME_COUNTER
> (V4L2_CID_XILINX_MIPICSISS + 2)
> > +/* Reset all event counters */
> > +#define V4L2_CID_XILINX_MIPICSISS_RESET_COUNTERS
> (V4L2_CID_XILINX_MIPICSISS + 3)
> > +
> > #endif /* __UAPI_XILINX_V4L2_CONTROLS_H__ */
> > --
> > 2.7.4
> >
> > This email and any attachments are intended for the sole use of the named
> recipient(s) and contain(s) confidential information that may be proprietary,
> privileged or copyrighted under applicable law. If you are not the intended
> recipient, do not read, copy, or forward this email message or any attachments.
> Delete this email message and any attachments immediately.
>
> --
> Regards,
>
> Sakari Ailus
Powered by blists - more mailing lists