[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190114102053.16013-1-manivannan.sadhasivam@linaro.org>
Date: Mon, 14 Jan 2019 15:50:50 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: shawnguo@...nel.org, leoyang.li@....com, robh+dt@...nel.org
Cc: linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, a.tropschug@...-systart.com,
m.bittner@...-systart.com, amit.kucheria@...aro.org,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Subject: [PATCH v2 0/3] Add Oxalis board support
Hello,
This patchset adds Oxalis board support. This board is one of the
96Boards Enterprise Edition platform from EBS-SYSTART GmbH. Below are some
of the key features of this board:
* SoC: NXP Layerscape LS1012A
* RAM: 1GB DDR3L
* PMU: NXP VR5100
* Storage: 64MByte SPI Flash for bootloader and RCW, MicroSD Card, SATA
* Connectivity: 2x Ethernet
* USB: 2x USB3.0
More information about this board can be found in 96Boards product
page: https://www.96boards.org/product/oxalis/
Ethernet and SPI flash are not supported yet!
Thanks,
Mani
Changes in v2:
As per Rob's review:
* Adopted the Oxalis board binding to JSON format.
* Sorted the EBS-SYSTART vendor prefix alphabetically.
* Used the generic node name for audio codec.
Manivannan Sadhasivam (3):
dt-bindings: vendor-prefixes: Add EBS-SYSTART GmbH Vendor Prefix
dt-bindings: arm: fsl: Add devicetree binding for Oxalis
arm64: dts: freescale: Add devicetree for Oxalis
.../devicetree/bindings/arm/fsl.yaml | 3 +-
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../boot/dts/freescale/fsl-ls1012a-oxalis.dts | 96 +++++++++++++++++++
4 files changed, 100 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts
--
2.17.1
Powered by blists - more mailing lists