[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190115004306.GN9278@minitux>
Date: Mon, 14 Jan 2019 16:43:06 -0800
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Brian Masney <masneyb@...tation.org>
Cc: linus.walleij@...aro.org, sboyd@...nel.org, andy.gross@...aro.org,
marc.zyngier@....com, shawnguo@...nel.org, dianders@...omium.org,
linux-gpio@...r.kernel.org, nicolas.dechesne@...aro.org,
niklas.cassel@...aro.org, david.brown@...aro.org,
robh+dt@...nel.org, mark.rutland@....com, thierry.reding@...il.com,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH v4 10/14] arm64: dts: qcom: pm8005: add interrupt
controller properties
On Sun 13 Jan 07:47 PST 2019, Brian Masney wrote:
> Add interrupt controller properties now that spmi-gpio is a proper
> hierarchical IRQ chip. The interrupts property is no longer needed so
> remove it.
>
> This change was not tested on any hardware but the same change was
> tested on qcom-pm8941.dtsi using a LG Nexus 5 (hammerhead) phone with
> no issues.
>
Reviewed-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> Signed-off-by: Brian Masney <masneyb@...tation.org>
> ---
> This is a new patch introduced in V4.
>
> arch/arm64/boot/dts/qcom/pm8005.dtsi | 6 ++----
> 1 file changed, 2 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi
> index 4d5aca3eeb69..c0ddf128136c 100644
> --- a/arch/arm64/boot/dts/qcom/pm8005.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi
> @@ -16,10 +16,8 @@
> reg = <0xc000>;
> gpio-controller;
> #gpio-cells = <2>;
> - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
> - <0 0xc1 0 IRQ_TYPE_NONE>,
> - <0 0xc2 0 IRQ_TYPE_NONE>,
> - <0 0xc3 0 IRQ_TYPE_NONE>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> };
> --
> 2.17.2
>
Powered by blists - more mailing lists