| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <f6d61c08-067a-233c-99f9-fcde46fe0f74@collabora.com>
Date: Tue, 15 Jan 2019 11:57:46 +0000
From: Guillaume Tucker <guillaume.tucker@...labora.com>
To: Russell King - ARM Linux admin <linux@...linux.org.uk>
Cc: linux-arm-kernel@...ts.infradead.org, tomeu.vizoso@...labora.com,
Linus Walleij <linus.walleij@...aro.org>,
Paul Parsons <lost.distance@...oo.com>,
linux-kernel@...r.kernel.org,
Haojian Zhuang <haojian.zhuang@...il.com>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>, matthew.hart@...aro.org,
Philipp Zabel <philipp.zabel@...il.com>, khilman@...libre.com,
enric.balletbo@...labora.com,
Robert Jarzmik <robert.jarzmik@...e.fr>,
Daniel Mack <daniel@...que.org>
Subject: Re: broonie-regulator/for-next boot bisection:
v5.0-rc2-20-g61b67608c6b9 on meson-gxl-s905x-libretech-cc
On 15/01/2019 11:38, Russell King - ARM Linux admin wrote:
> I received four of these, and from what I can tell, every one is
> identical apart from the target. What this would seem to mean
> is that if there are N targets, we're set to receive N reports of
> the same failure. Presumably if the failure is detected on 100
> targets, we'll get 100 separate emails reporting the same problem.
>
> Can something be done to reduce the number of duplicated emails
> that are sent - otherwise its probably going to result in people
> filtering the emails out of their mailboxes, which will defeat
> the purpose of these mails.
Yes, I'll actually be doing just that next week.
The idea will be to start by dropping duplicate bisections that
have the same commit range / CPU arch / defconfig to avoid
bisecting the same issue on multiple platforms. There's a tiny
chance that we might miss a different bisection outcome if a
different commit actually caused the boot failure on different
platforms, but if that's the case then the platforms that haven't
been bisected and remain broken will get caught in a later kernel
revision.
Then the next step will be to not send more than one email report
with the same result, so it'll also get done, but it's better to
avoid running unnecessary bisections in the first place to save
KernelCI resources.
Thanks for the feedback!
Best wishes,
Guillaume
> On Mon, Jan 14, 2019 at 02:04:49PM -0800, kernelci.org bot wrote:
>> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>> * This automated bisection report was sent to you on the basis *
>> * that you may be involved with the breaking commit it has *
>> * found. No manual investigation has been done to verify it, *
>> * and the root cause of the problem may be somewhere else. *
>> * Hope this helps! *
>> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>>
>> broonie-regulator/for-next boot bisection: v5.0-rc2-20-g61b67608c6b9 on meson-gxl-s905x-libretech-cc
>>
>> Summary:
>> Start: 61b67608c6b9 Merge branch 'regulator-5.1' into regulator-next
>> Details: https://kernelci.org/boot/id/5c3caf0459b514eca66eddf2
>> Plain log: https://storage.kernelci.org//broonie-regulator/for-next/v5.0-rc2-20-g61b67608c6b9/arm64/defconfig+CONFIG_RANDOMIZE_BASE=y/lab-baylibre/boot-meson-gxl-s905x-libretech-cc.txt
>> HTML log: https://storage.kernelci.org//broonie-regulator/for-next/v5.0-rc2-20-g61b67608c6b9/arm64/defconfig+CONFIG_RANDOMIZE_BASE=y/lab-baylibre/boot-meson-gxl-s905x-libretech-cc.html
>> Result: fe665efe6554 regulator: gpio: Convert to use descriptors
>>
>> Checks:
>> revert: PASS
>> verify: PASS
>>
>> Parameters:
>> Tree: broonie-regulator
>> URL: http://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
>> Branch: for-next
>> Target: meson-gxl-s905x-libretech-cc
>> CPU arch: arm64
>> Lab: lab-baylibre
>> Config: defconfig+CONFIG_RANDOMIZE_BASE=y
>> Test suite: boot
>>
>> Breaking commit found:
>>
>> -------------------------------------------------------------------------------
>> commit fe665efe6554eb80ff301ba9765d497f5f24abb6
>> Author: Linus Walleij <linus.walleij@...aro.org>
>> Date: Mon Jan 7 17:27:42 2019 +0100
>>
>> regulator: gpio: Convert to use descriptors
>>
>> This converts the GPIO regulator driver to use decriptors only.
>>
>> We have to let go of the array gpio handling: the fetched descriptors
>> are handled individually anyway, and the array retrieveal function
>> does not make it possible to retrieve each GPIO descriptor with
>> unique flags. Instead get them one by one.
>>
>> We request the "enable" GPIO separately as before, and make sure
>> that this line is requested as nonexclusive since enable lines can
>> be shared and the regulator core expects this.
>>
>> Most users of the GPIO regulator are using device tree.
>>
>> There are two boards in the kernel using the gpio regulator from a
>> non-devicetree path: PXA hx4700 and magician. Make sure to switch
>> these over to use descriptors as well.
>>
>> Cc: Philipp Zabel <p.zabel@...gutronix.de> # Magician
>> Cc: Petr Cvek <petr.cvek@....cz> # Magician
>> Cc: Robert Jarzmik <robert.jarzmik@...e.fr> # PXA
>> Cc: Paul Parsons <lost.distance@...oo.com> # hx4700
>> Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
>> Signed-off-by: Mark Brown <broonie@...nel.org>
>>
>> diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
>> index b79b757fdd41..51d38d5e776a 100644
>> --- a/arch/arm/mach-pxa/hx4700.c
>> +++ b/arch/arm/mach-pxa/hx4700.c
>> @@ -19,6 +19,7 @@
>> #include <linux/platform_device.h>
>> #include <linux/delay.h>
>> #include <linux/fb.h>
>> +#include <linux/gpio/machine.h>
>> #include <linux/gpio.h>
>> #include <linux/gpio_keys.h>
>> #include <linux/input.h>
>> @@ -702,9 +703,7 @@ static struct regulator_init_data bq24022_init_data = {
>> .consumer_supplies = bq24022_consumers,
>> };
>>
>> -static struct gpio bq24022_gpios[] = {
>> - { GPIO96_HX4700_BQ24022_ISET2, GPIOF_OUT_INIT_LOW, "bq24022_iset2" },
>> -};
>> +static enum gpiod_flags bq24022_gpiod_gflags[] = { GPIOD_OUT_LOW };
>>
>> static struct gpio_regulator_state bq24022_states[] = {
>> { .value = 100000, .gpios = (0 << 0) },
>> @@ -714,12 +713,10 @@ static struct gpio_regulator_state bq24022_states[] = {
>> static struct gpio_regulator_config bq24022_info = {
>> .supply_name = "bq24022",
>>
>> - .enable_gpio = GPIO72_HX4700_BQ24022_nCHARGE_EN,
>> - .enable_high = 0,
>> .enabled_at_boot = 0,
>>
>> - .gpios = bq24022_gpios,
>> - .nr_gpios = ARRAY_SIZE(bq24022_gpios),
>> + .gflags = bq24022_gpiod_gflags,
>> + .ngpios = ARRAY_SIZE(bq24022_gpiod_gflags),
>>
>> .states = bq24022_states,
>> .nr_states = ARRAY_SIZE(bq24022_states),
>> @@ -736,6 +733,17 @@ static struct platform_device bq24022 = {
>> },
>> };
>>
>> +static struct gpiod_lookup_table bq24022_gpiod_table = {
>> + .dev_id = "gpio-regulator",
>> + .table = {
>> + GPIO_LOOKUP("gpio-pxa", GPIO96_HX4700_BQ24022_ISET2,
>> + NULL, GPIO_ACTIVE_HIGH),
>> + GPIO_LOOKUP("gpio-pxa", GPIO72_HX4700_BQ24022_nCHARGE_EN,
>> + "enable", GPIO_ACTIVE_LOW),
>> + { },
>> + },
>> +};
>> +
>> /*
>> * StrataFlash
>> */
>> @@ -878,6 +886,7 @@ static void __init hx4700_init(void)
>> pxa_set_btuart_info(NULL);
>> pxa_set_stuart_info(NULL);
>>
>> + gpiod_add_lookup_table(&bq24022_gpiod_table);
>> platform_add_devices(devices, ARRAY_SIZE(devices));
>> pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup));
>>
>> diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
>> index 08b079653c3f..6538a7c0e504 100644
>> --- a/arch/arm/mach-pxa/magician.c
>> +++ b/arch/arm/mach-pxa/magician.c
>> @@ -645,9 +645,8 @@ static struct regulator_init_data bq24022_init_data = {
>> .consumer_supplies = bq24022_consumers,
>> };
>>
>> -static struct gpio bq24022_gpios[] = {
>> - { EGPIO_MAGICIAN_BQ24022_ISET2, GPIOF_OUT_INIT_LOW, "bq24022_iset2" },
>> -};
>> +
>> +static enum gpiod_flags bq24022_gpiod_gflags[] = { GPIOD_OUT_LOW };
>>
>> static struct gpio_regulator_state bq24022_states[] = {
>> { .value = 100000, .gpios = (0 << 0) },
>> @@ -657,12 +656,10 @@ static struct gpio_regulator_state bq24022_states[] = {
>> static struct gpio_regulator_config bq24022_info = {
>> .supply_name = "bq24022",
>>
>> - .enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
>> - .enable_high = 0,
>> .enabled_at_boot = 1,
>>
>> - .gpios = bq24022_gpios,
>> - .nr_gpios = ARRAY_SIZE(bq24022_gpios),
>> + .gflags = bq24022_gpiod_gflags,
>> + .ngpios = ARRAY_SIZE(bq24022_gpiod_gflags),
>>
>> .states = bq24022_states,
>> .nr_states = ARRAY_SIZE(bq24022_states),
>> @@ -679,6 +676,17 @@ static struct platform_device bq24022 = {
>> },
>> };
>>
>> +static struct gpiod_lookup_table bq24022_gpiod_table = {
>> + .dev_id = "gpio-regulator",
>> + .table = {
>> + GPIO_LOOKUP("gpio-pxa", EGPIO_MAGICIAN_BQ24022_ISET2,
>> + NULL, GPIO_ACTIVE_HIGH),
>> + GPIO_LOOKUP("gpio-pxa", GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
>> + "enable", GPIO_ACTIVE_LOW),
>> + { },
>> + },
>> +};
>> +
>> /*
>> * fixed regulator for ads7846
>> */
>> @@ -1027,6 +1035,7 @@ static void __init magician_init(void)
>> regulator_register_always_on(0, "power", pwm_backlight_supply,
>> ARRAY_SIZE(pwm_backlight_supply), 5000000);
>>
>> + gpiod_add_lookup_table(&bq24022_gpiod_table);
>> platform_add_devices(ARRAY_AND_SIZE(devices));
>> }
>>
>> diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c
>> index b2f5ec4f658a..0cec163200c8 100644
>> --- a/drivers/regulator/gpio-regulator.c
>> +++ b/drivers/regulator/gpio-regulator.c
>> @@ -30,16 +30,15 @@
>> #include <linux/regulator/machine.h>
>> #include <linux/regulator/of_regulator.h>
>> #include <linux/regulator/gpio-regulator.h>
>> -#include <linux/gpio.h>
>> +#include <linux/gpio/consumer.h>
>> #include <linux/slab.h>
>> #include <linux/of.h>
>> -#include <linux/of_gpio.h>
>>
>> struct gpio_regulator_data {
>> struct regulator_desc desc;
>> struct regulator_dev *dev;
>>
>> - struct gpio *gpios;
>> + struct gpio_desc **gpiods;
>> int nr_gpios;
>>
>> struct gpio_regulator_state *states;
>> @@ -82,7 +81,7 @@ static int gpio_regulator_set_voltage(struct regulator_dev *dev,
>>
>> for (ptr = 0; ptr < data->nr_gpios; ptr++) {
>> state = (target & (1 << ptr)) >> ptr;
>> - gpio_set_value_cansleep(data->gpios[ptr].gpio, state);
>> + gpiod_set_value_cansleep(data->gpiods[ptr], state);
>> }
>> data->state = target;
>>
>> @@ -119,7 +118,7 @@ static int gpio_regulator_set_current_limit(struct regulator_dev *dev,
>>
>> for (ptr = 0; ptr < data->nr_gpios; ptr++) {
>> state = (target & (1 << ptr)) >> ptr;
>> - gpio_set_value_cansleep(data->gpios[ptr].gpio, state);
>> + gpiod_set_value_cansleep(data->gpiods[ptr], state);
>> }
>> data->state = target;
>>
>> @@ -138,7 +137,8 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np,
>> {
>> struct gpio_regulator_config *config;
>> const char *regtype;
>> - int proplen, gpio, i;
>> + int proplen, i;
>> + int ngpios;
>> int ret;
>>
>> config = devm_kzalloc(dev,
>> @@ -153,59 +153,36 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np,
>>
>> config->supply_name = config->init_data->constraints.name;
>>
>> - if (of_property_read_bool(np, "enable-active-high"))
>> - config->enable_high = true;
>> -
>> if (of_property_read_bool(np, "enable-at-boot"))
>> config->enabled_at_boot = true;
>>
>> of_property_read_u32(np, "startup-delay-us", &config->startup_delay);
>>
>> - config->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0);
>> - if (config->enable_gpio < 0 && config->enable_gpio != -ENOENT)
>> - return ERR_PTR(config->enable_gpio);
>> -
>> - /* Fetch GPIOs. - optional property*/
>> - ret = of_gpio_count(np);
>> - if ((ret < 0) && (ret != -ENOENT))
>> - return ERR_PTR(ret);
>> -
>> - if (ret > 0) {
>> - config->nr_gpios = ret;
>> - config->gpios = devm_kcalloc(dev,
>> - config->nr_gpios, sizeof(struct gpio),
>> - GFP_KERNEL);
>> - if (!config->gpios)
>> + /* Fetch GPIO init levels */
>> + ngpios = gpiod_count(dev, NULL);
>> + if (ngpios > 0) {
>> + config->gflags = devm_kzalloc(dev,
>> + sizeof(enum gpiod_flags)
>> + * ngpios,
>> + GFP_KERNEL);
>> + if (!config->gflags)
>> return ERR_PTR(-ENOMEM);
>>
>> - proplen = of_property_count_u32_elems(np, "gpios-states");
>> - /* optional property */
>> - if (proplen < 0)
>> - proplen = 0;
>> + for (i = 0; i < ngpios; i++) {
>> + u32 val;
>>
>> - if (proplen > 0 && proplen != config->nr_gpios) {
>> - dev_warn(dev, "gpios <-> gpios-states mismatch\n");
>> - proplen = 0;
>> - }
>> + ret = of_property_read_u32_index(np, "gpios-states", i,
>> + &val);
>>
>> - for (i = 0; i < config->nr_gpios; i++) {
>> - gpio = of_get_named_gpio(np, "gpios", i);
>> - if (gpio < 0) {
>> - if (gpio != -ENOENT)
>> - return ERR_PTR(gpio);
>> - break;
>> - }
>> - config->gpios[i].gpio = gpio;
>> - config->gpios[i].label = config->supply_name;
>> - if (proplen > 0) {
>> - of_property_read_u32_index(np, "gpios-states",
>> - i, &ret);
>> - if (ret)
>> - config->gpios[i].flags =
>> - GPIOF_OUT_INIT_HIGH;
>> - }
>> + /* Default to high per specification */
>> + if (ret)
>> + config->gflags[i] = GPIOD_OUT_HIGH;
>> + else
>> + config->gflags[i] =
>> + val ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
>> }
>> }
>> + config->ngpios = ngpios;
>>
>> /* Fetch states. */
>> proplen = of_property_count_u32_elems(np, "states");
>> @@ -255,7 +232,8 @@ static int gpio_regulator_probe(struct platform_device *pdev)
>> struct device_node *np = pdev->dev.of_node;
>> struct gpio_regulator_data *drvdata;
>> struct regulator_config cfg = { };
>> - int ptr, ret, state;
>> + enum gpiod_flags gflags;
>> + int ptr, ret, state, i;
>>
>> drvdata = devm_kzalloc(&pdev->dev, sizeof(struct gpio_regulator_data),
>> GFP_KERNEL);
>> @@ -275,26 +253,17 @@ static int gpio_regulator_probe(struct platform_device *pdev)
>> return -ENOMEM;
>> }
>>
>> - if (config->nr_gpios != 0) {
>> - drvdata->gpios = kmemdup(config->gpios,
>> - config->nr_gpios * sizeof(struct gpio),
>> - GFP_KERNEL);
>> - if (drvdata->gpios == NULL) {
>> - dev_err(&pdev->dev, "Failed to allocate gpio data\n");
>> - ret = -ENOMEM;
>> - goto err_name;
>> - }
>> -
>> - drvdata->nr_gpios = config->nr_gpios;
>> - ret = gpio_request_array(drvdata->gpios, drvdata->nr_gpios);
>> - if (ret) {
>> - if (ret != -EPROBE_DEFER)
>> - dev_err(&pdev->dev,
>> - "Could not obtain regulator setting GPIOs: %d\n",
>> - ret);
>> - goto err_memgpio;
>> - }
>> + for (i = 0; i < config->ngpios; i++) {
>> + drvdata->gpiods[i] = devm_gpiod_get_index(&pdev->dev,
>> + NULL,
>> + i,
>> + config->gflags[i]);
>> + if (IS_ERR(drvdata->gpiods[i]))
>> + return PTR_ERR(drvdata->gpiods[i]);
>> + /* This is good to know */
>> + gpiod_set_consumer_name(drvdata->gpiods[i], drvdata->desc.name);
>> }
>> + drvdata->nr_gpios = config->ngpios;
>>
>> drvdata->states = kmemdup(config->states,
>> config->nr_states *
>> @@ -303,7 +272,7 @@ static int gpio_regulator_probe(struct platform_device *pdev)
>> if (drvdata->states == NULL) {
>> dev_err(&pdev->dev, "Failed to allocate state data\n");
>> ret = -ENOMEM;
>> - goto err_stategpio;
>> + goto err_name;
>> }
>> drvdata->nr_states = config->nr_states;
>>
>> @@ -330,7 +299,7 @@ static int gpio_regulator_probe(struct platform_device *pdev)
>> /* build initial state from gpio init data. */
>> state = 0;
>> for (ptr = 0; ptr < drvdata->nr_gpios; ptr++) {
>> - if (config->gpios[ptr].flags & GPIOF_OUT_INIT_HIGH)
>> + if (config->gflags[ptr] == GPIOD_OUT_HIGH)
>> state |= (1 << ptr);
>> }
>> drvdata->state = state;
>> @@ -340,21 +309,19 @@ static int gpio_regulator_probe(struct platform_device *pdev)
>> cfg.driver_data = drvdata;
>> cfg.of_node = np;
>>
>> - if (gpio_is_valid(config->enable_gpio)) {
>> - cfg.ena_gpio = config->enable_gpio;
>> - cfg.ena_gpio_initialized = true;
>> - }
>> - cfg.ena_gpio_invert = !config->enable_high;
>> - if (config->enabled_at_boot) {
>> - if (config->enable_high)
>> - cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
>> - else
>> - cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
>> - } else {
>> - if (config->enable_high)
>> - cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
>> - else
>> - cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
>> + /*
>> + * The signal will be inverted by the GPIO core if flagged so in the
>> + * decriptor.
>> + */
>> + if (config->enabled_at_boot)
>> + gflags = GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE;
>> + else
>> + gflags = GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE;
>> +
>> + cfg.ena_gpiod = gpiod_get_optional(&pdev->dev, "enable", gflags);
>> + if (IS_ERR(cfg.ena_gpiod)) {
>> + ret = PTR_ERR(cfg.ena_gpiod);
>> + goto err_memstate;
>> }
>>
>> drvdata->dev = regulator_register(&drvdata->desc, &cfg);
>> @@ -370,10 +337,6 @@ static int gpio_regulator_probe(struct platform_device *pdev)
>>
>> err_memstate:
>> kfree(drvdata->states);
>> -err_stategpio:
>> - gpio_free_array(drvdata->gpios, drvdata->nr_gpios);
>> -err_memgpio:
>> - kfree(drvdata->gpios);
>> err_name:
>> kfree(drvdata->desc.name);
>> return ret;
>> @@ -384,12 +347,7 @@ static int gpio_regulator_remove(struct platform_device *pdev)
>> struct gpio_regulator_data *drvdata = platform_get_drvdata(pdev);
>>
>> regulator_unregister(drvdata->dev);
>> -
>> - gpio_free_array(drvdata->gpios, drvdata->nr_gpios);
>> -
>> kfree(drvdata->states);
>> - kfree(drvdata->gpios);
>> -
>> kfree(drvdata->desc.name);
>>
>> return 0;
>> diff --git a/include/linux/regulator/gpio-regulator.h b/include/linux/regulator/gpio-regulator.h
>> index 19fbd267406d..49c407afb944 100644
>> --- a/include/linux/regulator/gpio-regulator.h
>> +++ b/include/linux/regulator/gpio-regulator.h
>> @@ -21,6 +21,8 @@
>> #ifndef __REGULATOR_GPIO_H
>> #define __REGULATOR_GPIO_H
>>
>> +#include <linux/gpio/consumer.h>
>> +
>> struct regulator_init_data;
>>
>> enum regulator_type;
>> @@ -53,9 +55,9 @@ struct gpio_regulator_state {
>> * This is used to keep the regulator at
>> * the default state
>> * @startup_delay: Start-up time in microseconds
>> - * @gpios: Array containing the gpios needed to control
>> - * the setting of the regulator
>> - * @nr_gpios: Number of gpios
>> + * @gflags: Array of GPIO configuration flags for initial
>> + * states
>> + * @ngpios: Number of GPIOs and configurations available
>> * @states: Array of gpio_regulator_state entries describing
>> * the gpio state for specific voltages
>> * @nr_states: Number of states available
>> @@ -74,8 +76,8 @@ struct gpio_regulator_config {
>> unsigned enabled_at_boot:1;
>> unsigned startup_delay;
>>
>> - struct gpio *gpios;
>> - int nr_gpios;
>> + enum gpiod_flags *gflags;
>> + int ngpios;
>>
>> struct gpio_regulator_state *states;
>> int nr_states;
>> -------------------------------------------------------------------------------
>>
>>
>> Git bisection log:
>>
>> -------------------------------------------------------------------------------
>> git bisect start
>> # good: [1c7fc5cbc33980acd13d668f1c8f0313d6ae9fd8] Linux 5.0-rc2
>> git bisect good 1c7fc5cbc33980acd13d668f1c8f0313d6ae9fd8
>> # bad: [61b67608c6b90e8a2abde5be31bb181f56849927] Merge branch 'regulator-5.1' into regulator-next
>> git bisect bad 61b67608c6b90e8a2abde5be31bb181f56849927
>> # bad: [fe665efe6554eb80ff301ba9765d497f5f24abb6] regulator: gpio: Convert to use descriptors
>> git bisect bad fe665efe6554eb80ff301ba9765d497f5f24abb6
>> # good: [08f0b14adc7c4fd5ef7ab2f4b7a62ed1b8216bbb] regulator: hi655x: Removed unused ctrl_regs field from struct hi655x_regulator
>> git bisect good 08f0b14adc7c4fd5ef7ab2f4b7a62ed1b8216bbb
>> # good: [67cc7ca316c4167cc5aca54b7f63a55de356d976] regulator: max14577: Remove redundant MODULE_ALIAS
>> git bisect good 67cc7ca316c4167cc5aca54b7f63a55de356d976
>> # good: [f01a7beb6791f1c419424c1a6958b7d0a289c974] regulator: act8865: Fix act8600_sudcdc_voltage_ranges setting
>> git bisect good f01a7beb6791f1c419424c1a6958b7d0a289c974
>> # first bad commit: [fe665efe6554eb80ff301ba9765d497f5f24abb6] regulator: gpio: Convert to use descriptors
>> -------------------------------------------------------------------------------
>>
>
Powered by blists - more mailing lists