| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190116165236.8330-1-jbrunet@baylibre.com>
Date: Wed, 16 Jan 2019 17:52:36 +0100
From: Jerome Brunet <jbrunet@...libre.com>
To: Kevin Hilman <khilman@...libre.com>
Cc: Jerome Brunet <jbrunet@...libre.com>,
linux-amlogic@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH] arm64: dts: meson: fix g12a buses
periph and hiu bus addresses/size are wrong.
cbus, aobus and apb just don't exist in the memory map so remove them.
Fixes: 9c8c52f7cb4f ("arm64: dts: meson-g12a: add initial g12a s905d2 SoC DT support")
Signed-off-by: Jerome Brunet <jbrunet@...libre.com>
---
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 70 +++++++--------------
1 file changed, 24 insertions(+), 46 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 3b82a975c663..2aea5ba62fee 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -78,46 +78,40 @@
#size-cells = <2>;
ranges;
- periphs: periphs@...34000 {
+ periphs: bus@...34400 {
compatible = "simple-bus";
- reg = <0x0 0xff634000 0x0 0x2000>;
+ reg = <0x0 0xff634400 0x0 0x400>;
#address-cells = <2>;
#size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>;
+ ranges = <0x0 0x0 0x0 0xff634400 0x0 0x400>;
};
- hiubus: bus@...3c000 {
+ hiu: bus@...3c000 {
compatible = "simple-bus";
- reg = <0x0 0xff63c000 0x0 0x1c00>;
+ reg = <0x0 0xff63c000 0x0 0x1400>;
#address-cells = <2>;
#size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
+ ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1400>;
};
- aobus: bus@...00000 {
- compatible = "simple-bus";
- reg = <0x0 0xff800000 0x0 0x100000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
-
- uart_AO: serial@...0 {
- compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
- reg = <0x0 0x3000 0x0 0x18>;
- interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>, <&xtal>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
- status = "disabled";
- };
-
- uart_AO_B: serial@...0 {
- compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
- reg = <0x0 0x4000 0x0 0x18>;
- interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>, <&xtal>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
- status = "disabled";
- };
+ uart_AO: serial@...03000 {
+ compatible = "amlogic,meson-gx-uart",
+ "amlogic,meson-ao-uart";
+ reg = <0x0 0xff803000 0x0 0x18>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>, <&xtal>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+ status = "disabled";
+ };
+
+ uart_AO_B: serial@...04000 {
+ compatible = "amlogic,meson-gx-uart",
+ "amlogic,meson-ao-uart";
+ reg = <0x0 0xff804000 0x0 0x18>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>, <&xtal>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+ status = "disabled";
};
gic: interrupt-controller@...01000 {
@@ -132,22 +126,6 @@
#interrupt-cells = <3>;
#address-cells = <0>;
};
-
- cbus: bus@...00000 {
- compatible = "simple-bus";
- reg = <0x0 0xffd00000 0x0 0x25000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>;
- };
-
- apb: apb@...00000 {
- compatible = "simple-bus";
- reg = <0x0 0xffe00000 0x0 0x200000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
- };
};
timer {
--
2.20.1
Powered by blists - more mailing lists