[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190117003234.22127-11-masneyb@onstation.org>
Date: Wed, 16 Jan 2019 19:32:30 -0500
From: Brian Masney <masneyb@...tation.org>
To: linus.walleij@...aro.org, sboyd@...nel.org,
bjorn.andersson@...aro.org, andy.gross@...aro.org
Cc: marc.zyngier@....com, shawnguo@...nel.org, dianders@...omium.org,
linux-gpio@...r.kernel.org, nicolas.dechesne@...aro.org,
niklas.cassel@...aro.org, david.brown@...aro.org,
robh+dt@...nel.org, mark.rutland@....com, thierry.reding@...il.com,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Subject: [PATCH v5 10/14] arm64: dts: qcom: pm8005: add interrupt controller properties
Add interrupt controller properties now that spmi-gpio is a proper
hierarchical IRQ chip. The interrupts property is no longer needed so
remove it.
This change was not tested on any hardware but the same change was
tested on qcom-pm8941.dtsi using a LG Nexus 5 (hammerhead) phone with
no issues.
Signed-off-by: Brian Masney <masneyb@...tation.org>
Reviewed-by: Stephen Boyd <sboyd@...nel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@...aro.org>
---
Changes since v4:
- None
Patch introduced in v4.
arch/arm64/boot/dts/qcom/pm8005.dtsi | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi
index 4d5aca3eeb69..c0ddf128136c 100644
--- a/arch/arm64/boot/dts/qcom/pm8005.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi
@@ -16,10 +16,8 @@
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
- interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
- <0 0xc1 0 IRQ_TYPE_NONE>,
- <0 0xc2 0 IRQ_TYPE_NONE>,
- <0 0xc3 0 IRQ_TYPE_NONE>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
};
--
2.17.2
Powered by blists - more mailing lists