[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1547744074-28308-3-git-send-email-lollivier@baylibre.com>
Date: Thu, 17 Jan 2019 17:54:32 +0100
From: Loys Ollivier <lollivier@...libre.com>
To: devicetree@...r.kernel.org, Johan Hovold <johan@...nel.org>
Cc: Loys Ollivier <lollivier@...libre.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
linux-kernel@...r.kernel.org, Kevin Hilman <khilman@...libre.com>,
linux-amlogic@...ts.infradead.org,
linux-mediatek@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Subject: [PATCH v2 2/4] dt-bindings: gnss: add mediatek binding
Add binding for Mediatek-based GNSS receivers.
Signed-off-by: Loys Ollivier <lollivier@...libre.com>
---
v2:
Renamed bindings from Globaltop/gtop to Mediatek/mtk.
Moved current-speed as an optional propertie.
Removed the status line in the example.
Added "mediatek,mt3339" compatible.
.../devicetree/bindings/gnss/mediatek.txt | 39 ++++++++++++++++++++++
1 file changed, 39 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gnss/mediatek.txt
diff --git a/Documentation/devicetree/bindings/gnss/mediatek.txt b/Documentation/devicetree/bindings/gnss/mediatek.txt
new file mode 100644
index 000000000000..fd984b4a9a6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/mediatek.txt
@@ -0,0 +1,39 @@
+Mediatek-based GNSS Receiver DT binding
+
+Mediatek chipsets are used in GNSS-receiver modules produced by several
+vendors and can use UART, SPI or I2C interfaces.
+
+Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic
+properties.
+
+Required properties:
+
+- compatible : Must be one of
+
+ "globaltop,pa6h"
+ "mediatek,mt3339"
+
+- vcc-supply : Main voltage regulator (pin name: 3V3_IN, VCC, VDD)
+
+Required properties (I2C):
+- reg : I2C slave address
+
+Required properties (SPI):
+- reg : SPI chip select address
+
+Optional properties:
+
+- timepulse-gpios : Time pulse GPIO
+- v-bckp-supply : Backup voltage regulator
+- current-speed : Default UART baud rate
+
+Example:
+
+serial@...4 {
+ compatible = "ns16550a";
+
+ gnss {
+ compatible = "globaltop,pa6h";
+ vcc-supply = <&vcc_3v3>;
+ };
+};
--
2.7.4
Powered by blists - more mailing lists