| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAFBinCBxuqwpVMkkv_nKnhCf9HW0GCnw-T4Dyuc0eQYgc_UDTw@mail.gmail.com>
Date: Fri, 18 Jan 2019 22:53:12 +0100
From: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
To: Jerome Brunet <jbrunet@...libre.com>
Cc: Kevin Hilman <khilman@...libre.com>,
linux-amlogic@...ts.infradead.org, devicetree@...r.kernel.org,
patchwork-bot+notify@...nel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 2/4] soc: amlogic: clk-measure: add axg and g12a support
Hi Jerome,
On Fri, Jan 18, 2019 at 11:34 AM Jerome Brunet <jbrunet@...libre.com> wrote:
>
> Add support for the axg and g12a SoC family in amlogic clk measure
>
> Signed-off-by: Jerome Brunet <jbrunet@...libre.com>
with the "wifi_beacon" issue below solved:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
please have a look at the other comments regarding G12A as well.
since I don't have any other information than what's available in
buildroot_openlinux_kernel_4.9_fbdev_20180706 I can't say whether your
IDs / names are right or not (all I can say is: some don't match with
that specific buildroot version).
> ---
> drivers/soc/amlogic/meson-clk-measure.c | 194 ++++++++++++++++++++++++
> 1 file changed, 194 insertions(+)
>
> diff --git a/drivers/soc/amlogic/meson-clk-measure.c b/drivers/soc/amlogic/meson-clk-measure.c
> index daea191a66fa..5570180b94a1 100644
> --- a/drivers/soc/amlogic/meson-clk-measure.c
> +++ b/drivers/soc/amlogic/meson-clk-measure.c
> @@ -165,6 +165,192 @@ static struct meson_msr_id clk_msr_gx[CLK_MSR_MAX] = {
> CLK_MSR_ID(82, "ge2d"),
> };
>
> +static struct meson_msr_id clk_msr_axg[CLK_MSR_MAX] = {
> + CLK_MSR_ID(0, "ring_osc_out_ee_0"),
> + CLK_MSR_ID(1, "ring_osc_out_ee_1"),
> + CLK_MSR_ID(2, "ring_osc_out_ee_2"),
> + CLK_MSR_ID(3, "a53_ring_osc"),
> + CLK_MSR_ID(4, "gp0_pll"),
> + CLK_MSR_ID(5, "gp1_pll"),
> + CLK_MSR_ID(7, "clk81"),
> + CLK_MSR_ID(9, "encl"),
> + CLK_MSR_ID(17, "sys_pll_div16"),
> + CLK_MSR_ID(18, "sys_cpu_div16"),
> + CLK_MSR_ID(20, "rtc_osc_out"),
> + CLK_MSR_ID(23, "mmc_clk"),
> + CLK_MSR_ID(28, "sar_adc"),
> + CLK_MSR_ID(31, "mpll_test_out"),
> + CLK_MSR_ID(40, "mod_eth_tx_clk"),
> + CLK_MSR_ID(41, "mod_eth_rx_clk_rmii"),
> + CLK_MSR_ID(42, "mp0_out"),
> + CLK_MSR_ID(43, "fclk_div5"),
> + CLK_MSR_ID(44, "pwm_b"),
> + CLK_MSR_ID(45, "pwm_a"),
> + CLK_MSR_ID(46, "vpu"),
> + CLK_MSR_ID(47, "ddr_dpll_pt"),
> + CLK_MSR_ID(48, "mp1_out"),
> + CLK_MSR_ID(49, "mp2_out"),
> + CLK_MSR_ID(50, "mp3_out"),
> + CLK_MSR_ID(51, "sd_emmm_c"),
> + CLK_MSR_ID(52, "sd_emmc_b"),
> + CLK_MSR_ID(61, "gpio_msr"),
> + CLK_MSR_ID(66, "audio_slv_lrclk_c"),
> + CLK_MSR_ID(67, "audio_slv_lrclk_b"),
> + CLK_MSR_ID(68, "audio_slv_lrclk_a"),
> + CLK_MSR_ID(69, "audio_slv_sclk_c"),
> + CLK_MSR_ID(70, "audio_slv_sclk_b"),
> + CLK_MSR_ID(71, "audio_slv_sclk_a"),
> + CLK_MSR_ID(72, "pwm_d"),
> + CLK_MSR_ID(73, "pwm_c"),
> + CLK_MSR_ID(73, "wifi_beacon"),
"wifi_beacon" is ID 74 according to Amlogic's buildroot kernel sources
(buildroot_openlinux_kernel_4.9_fbdev_20180706)
> + CLK_MSR_ID(75, "tdmin_lb_lrcl"),
> + CLK_MSR_ID(76, "tdmin_lb_sclk"),
> + CLK_MSR_ID(77, "rng_ring_osc_0"),
> + CLK_MSR_ID(78, "rng_ring_osc_1"),
> + CLK_MSR_ID(79, "rng_ring_osc_2"),
> + CLK_MSR_ID(80, "rng_ring_osc_3"),
> + CLK_MSR_ID(81, "vapb"),
> + CLK_MSR_ID(82, "ge2d"),
> + CLK_MSR_ID(84, "audio_resample"),
> + CLK_MSR_ID(85, "audio_pdm_sys"),
> + CLK_MSR_ID(86, "audio_spdifout"),
> + CLK_MSR_ID(87, "audio_spdifin"),
> + CLK_MSR_ID(88, "audio_lrclk_f"),
> + CLK_MSR_ID(89, "audio_lrclk_e"),
> + CLK_MSR_ID(90, "audio_lrclk_d"),
> + CLK_MSR_ID(91, "audio_lrclk_c"),
> + CLK_MSR_ID(92, "audio_lrclk_b"),
> + CLK_MSR_ID(93, "audio_lrclk_a"),
> + CLK_MSR_ID(94, "audio_sclk_f"),
> + CLK_MSR_ID(95, "audio_sclk_e"),
> + CLK_MSR_ID(96, "audio_sclk_d"),
> + CLK_MSR_ID(97, "audio_sclk_c"),
> + CLK_MSR_ID(98, "audio_sclk_b"),
> + CLK_MSR_ID(99, "audio_sclk_a"),
> + CLK_MSR_ID(100, "audio_mclk_f"),
> + CLK_MSR_ID(101, "audio_mclk_e"),
> + CLK_MSR_ID(102, "audio_mclk_d"),
> + CLK_MSR_ID(103, "audio_mclk_c"),
> + CLK_MSR_ID(104, "audio_mclk_b"),
> + CLK_MSR_ID(105, "audio_mclk_a"),
> + CLK_MSR_ID(106, "pcie_refclk_n"),
> + CLK_MSR_ID(107, "pcie_refclk_p"),
> + CLK_MSR_ID(108, "audio_locker_out"),
> + CLK_MSR_ID(109, "audio_locker_in"),
> +};
> +
> +static struct meson_msr_id clk_msr_g12a[CLK_MSR_MAX] = {
> + CLK_MSR_ID(0, "ring_osc_out_ee_0"),
> + CLK_MSR_ID(1, "ring_osc_out_ee_1"),
> + CLK_MSR_ID(2, "ring_osc_out_ee_2"),
> + CLK_MSR_ID(3, "sys_cpu_ring_osc"),
> + CLK_MSR_ID(4, "gp0_pll"),
> + CLK_MSR_ID(6, "enci"),
> + CLK_MSR_ID(7, "clk81"),
> + CLK_MSR_ID(8, "encp"),
> + CLK_MSR_ID(9, "encl"),
> + CLK_MSR_ID(10, "vdac"),
> + CLK_MSR_ID(11, "eth_tx"),
Amlogic's buildroot kernel
(buildroot_openlinux_kernel_4.9_fbdev_20180706) calls this
"mac_eth_tx_clk".
I leave it up to you whether you want to change it to "mac_eth_tx" or
not (it's only used for debugging purpose and I don't know what the
actual signal name in the G12A datasheet is)
> + CLK_MSR_ID(12, "hifi_pll"),
> + CLK_MSR_ID(13, "mod_tcon"),
> + CLK_MSR_ID(14, "fec_0"),
> + CLK_MSR_ID(15, "fec_1"),
> + CLK_MSR_ID(16, "fec_2"),
> + CLK_MSR_ID(17, "sys_pll_div16"),
> + CLK_MSR_ID(18, "sys_cpu_div16"),
> + CLK_MSR_ID(19, "lcd_an_ph2"),
> + CLK_MSR_ID(20, "rtc_osc_out"),
> + CLK_MSR_ID(21, "lcd_an_ph3"),
> + CLK_MSR_ID(22, "eth_phy_ref"),
similar to the "eth_tx" clock above this is called
"mac_eth_phy_ref_clk" in the buildroot kernel which I'm using as
reference
> + CLK_MSR_ID(23, "mpll_50m"),
> + CLK_MSR_ID(24, "eth_125m"),
> + CLK_MSR_ID(25, "eth_rmii"),
> + CLK_MSR_ID(26, "sc_int"),
> + CLK_MSR_ID(27, "in_mac"),
> + CLK_MSR_ID(28, "sar_adc"),
Amlogic's buildroot_openlinux_kernel_4.9_fbdev_20180706 kernel also has:
29 = "pcie_clk_inp"
30 = "pcie_clk_inn"
> + CLK_MSR_ID(31, "mpll_test_out"),
> + CLK_MSR_ID(32, "vdec"),
> + CLK_MSR_ID(33, "sys_cpu_ring_osc_1"),
> + CLK_MSR_ID(34, "eth_mpll_50m"),
> + CLK_MSR_ID(35, "mali"),
> + CLK_MSR_ID(36, "hdmi_tx_pixel"),
> + CLK_MSR_ID(37, "cdac"),
> + CLK_MSR_ID(38, "vdin_meas"),
> + CLK_MSR_ID(39, "bt656"),
> + CLK_MSR_ID(41, "eth_rx_or_rmii"),
similar to the "eth_tx" clock above this is called
"mac_eth_rx_clk_rmii" in the buildroot kernel which I'm using as
reference
> + CLK_MSR_ID(42, "mp0_out"),
> + CLK_MSR_ID(43, "fclk_div5"),
> + CLK_MSR_ID(44, "pwm_b"),
> + CLK_MSR_ID(45, "pwm_a"),
> + CLK_MSR_ID(46, "vpu"),
> + CLK_MSR_ID(47, "ddr_dpll_pt"),
> + CLK_MSR_ID(48, "mp1_out"),
> + CLK_MSR_ID(49, "mp2_out"),
> + CLK_MSR_ID(50, "mp3_out"),
> + CLK_MSR_ID(51, "sd_emmc_c"),
> + CLK_MSR_ID(52, "sd_emmc_b"),
> + CLK_MSR_ID(53, "sd_emmc_a"),
> + CLK_MSR_ID(54, "vpu_clkc"),
> + CLK_MSR_ID(55, "vid_pll_div_out"),
> + CLK_MSR_ID(56, "wave420l_a"),
> + CLK_MSR_ID(57, "wave420l_c"),
> + CLK_MSR_ID(58, "wave420l_b"),
> + CLK_MSR_ID(59, "hcodec"),
> + CLK_MSR_ID(61, "gpio_msr"),
> + CLK_MSR_ID(62, "hevcb"),
> + CLK_MSR_ID(63, "dsi_meas"),
> + CLK_MSR_ID(64, "spicc_1"),
> + CLK_MSR_ID(65, "spicc_0"),
> + CLK_MSR_ID(66, "vid_lock"),
> + CLK_MSR_ID(67, "dsi_phy"),
> + CLK_MSR_ID(68, "hdcp22_skp"),
> + CLK_MSR_ID(69, "hdcp22_esm"),
buildroot_openlinux_kernel_4.9_fbdev_20180706 has these 68 and 69
swapped, I'm not sure which one is right though:
69 = "cts_hdcp22_skpclk"
68 = "cts_hdcp22_esmclk"
> + CLK_MSR_ID(70, "pwm_f"),
> + CLK_MSR_ID(71, "pwm_e"),
> + CLK_MSR_ID(72, "pwm_d"),
> + CLK_MSR_ID(73, "pwm_c"),
> + CLK_MSR_ID(75, "hevcf"),
> + CLK_MSR_ID(77, "rng_ring_osc_0"),
> + CLK_MSR_ID(78, "rng_ring_osc_1"),
> + CLK_MSR_ID(79, "rng_ring_osc_2"),
> + CLK_MSR_ID(80, "rng_ring_osc_3"),
> + CLK_MSR_ID(81, "vapb"),
> + CLK_MSR_ID(82, "ge2d"),
> + CLK_MSR_ID(83, "co_rx"),
> + CLK_MSR_ID(84, "co_tx"),
> + CLK_MSR_ID(89, "hdmi_todig"),
> + CLK_MSR_ID(90, "hdmitx_sys"),
> + CLK_MSR_ID(94, "eth_phy_rx"),
> + CLK_MSR_ID(95, "eth_phy_pll"),
this is called "eth_phy_plltxclk" in
buildroot_openlinux_kernel_4.9_fbdev_20180706 which I'm using as
refernece
> + CLK_MSR_ID(96, "vpu_b"),
> + CLK_MSR_ID(97, "cpu_b_tmp"),
> + CLK_MSR_ID(98, "ts"),
> + CLK_MSR_ID(99, "ring_osc_out_ee_3"),
> + CLK_MSR_ID(100, "ring_osc_out_ee_4"),
> + CLK_MSR_ID(101, "ring_osc_out_ee_5"),
> + CLK_MSR_ID(102, "ring_osc_out_ee_6"),
> + CLK_MSR_ID(103, "ring_osc_out_ee_7"),
> + CLK_MSR_ID(104, "ring_osc_out_ee_8"),
> + CLK_MSR_ID(105, "ring_osc_out_ee_9"),
> + CLK_MSR_ID(106, "ephy_test"),
> + CLK_MSR_ID(107, "au_dac_g128x"),
> + CLK_MSR_ID(108, "audio_locker_out"),
> + CLK_MSR_ID(109, "audio_locker_in"),
> + CLK_MSR_ID(110, "audio_tdmout_c_sclk"),
> + CLK_MSR_ID(111, "audio_tdmout_b_sclk"),
> + CLK_MSR_ID(112, "audio_tdmout_a_sclk"),
> + CLK_MSR_ID(113, "audio_tdmin_lb_sclk"),
> + CLK_MSR_ID(114, "audio_tdmin_c_sclk"),
> + CLK_MSR_ID(115, "audio_tdmin_b_sclk"),
> + CLK_MSR_ID(116, "audio_tdmin_a_sclk"),
> + CLK_MSR_ID(117, "audio_resample"),
> + CLK_MSR_ID(118, "audio_pdm_sys"),
> + CLK_MSR_ID(119, "audio_spdifout_b"),
> + CLK_MSR_ID(120, "audio_spdifout"),
> + CLK_MSR_ID(121, "audio_spdifin"),
the three clocks above use a "_mst_clk" suffix in
buildroot_openlinux_kernel_4.9_fbdev_20180706.
I'm not sure if that "_mst" suffix is relevant (might stand for "master")
Regards
Martin
Powered by blists - more mailing lists